Hamid Ossareh

Prof. Hamid Ossareh

University of Vermont

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 December 2020 in Energies
Verified
Journal Article
Open access
PDF file
Mads AlmassalkhiMads Almassalkhi
Mads Almassalkhi
SBSarnaduti Brahma
Sarnaduti Brahma
NNNawaf Nazir
Nawaf Nazir
HOHamid Ossareh
Hamid Ossareh
PRPavan Racherla
Pavan Racherla
DADhananjay Anand
Dhananjay Anand
Renewable portfolio standards are targeting high levels of variable solar photovoltaics (PV) in electric distribution systems, which makes reliability more challenging to maintain for distribution system operators (DSOs). Distributed energy resources (DERs), including smart, connected appliances and PV inverters, represent responsive grid resources that can provide flexibility to support the DSO in actively managing their networks to facilitate reliability under extreme levels of solar PV. This flexibility can also be used to optimize system operations with respect to economic signals from wholesale energy and ancillary service markets. Here, we present a novel hierarchical scheme that actively controls behind-the-meter DERs to reliably manage each unbalanced distribution feeder and exploits the available flexibility to ensure reliable operation and economically optimizes the entire distribution network. Each layer of the scheme employs advanced optimization methods at different timescales to ensure that the system operates within both grid and device limits. The hierarchy is validated in a large-scale realistic simulation based on data from the industry. Simulation results show that coordination of flexibility improves both system reliability and economics, and enables greater penetration of solar PV. Discussion is also provided on the practical viability of the required communications and controls to implement the presented scheme within a large DSO.

30 December 2019 in IEEE Transactions on Control Systems Technology
Verified
Journal Article
Closed access
HOHamid Ossareh
Hamid Ossareh
SWSam Wisotzki
Sam Wisotzki
JSJulia Buckland Seeds
Julia Buckland Seeds
MJMrdjan Jankovic
Mrdjan Jankovic
This brief develops a method for system characterization and controller tuning for the boost control system of automotive turbocharged gasoline engines. The method utilizes the relay feedback technique for system characterization, followed by the internal model control (IMC) technique for controller tuning. The novelty is that instead of a high fidelity plant model, an ultrasimplified gain-integrator-delay model is employed in the IMC controller. As we show, our method leads to a time-efficient calibration process, assigns a desired closed-loop bandwidth exactly, and leads to good stability margins. A detailed and thorough analysis of the method, including its fundamental limitations, is provided. The method is experimentally applied to the boost control system of a turbocharged gasoline engine, where it is shown that the controller gains can be reliably computed at various engine operating points. The method identifies turbocharger speed as the best scheduling parameter for the controller gains, and the resulting controller is experimentally shown to yield good tracking performance.

1 August 2023 in Journal of Guidance, Control, and Dynamics
Verified
Journal Article
Closed access
HBHimadri Basu
Himadri Basu
YPYasaman Pedari
Yasaman Pedari
MAMads Almassalkhi
Mads Almassalkhi
HOHamid Ossareh
Hamid Ossareh
This paper studies the problem of collision-free trajectory planning for a satellite swarm reconfiguration under perturbations and modeling uncertainties in a low Earth orbit (LEO). Determining exact trajectory planning solutions is computationally heavy as they require solving a mixed-integer nonlinear program owing to i) nonlinear relative dynamic models of satellites, ii) fuel-optimal assignment of satellites on the final formation, and iii) nonconvex collision avoidance constraints. To address these, first, a suitable linear model for trajectory planning is identified by quantifying modeling accuracy associated with various models capturing LEO perturbations. The effects of any residual modeling errors in the path prediction are mitigated by shrinking-horizon model-predictive feedback control, which updates the control command based on the latest satellite measurements. Secondly, an optimal swarm configuration is efficiently computed by decoupling the target-assignment algorithm from the trajectory optimization problem. Based on the estimated fuel expenditure for each satellite–target pairing, the target-assignment algorithm selects a configuration with minimal fuel consumption. Lastly, to determine collision-free, fuel-optimal maneuvers, two novel trajectory planning approaches, namely, distributed and decentralized trajectory optimization, are presented. While the former iteratively searches for collision-free feasible paths to optimal terminal configuration, the latter computes a near-optimal configuration with collision-free paths.

17 November 2023 in IEEE Transactions on Control Systems Technology
Verified
Journal Article
Closed access
EBEli Bacher-Chong
Eli Bacher-Chong
MAMostafa Ali Ayubirad
Mostafa Ali Ayubirad
ZQZeng Qiu
Zeng Qiu
HWHao Wang
Hao Wang
AGAlireza Goshtasbi
Alireza Goshtasbi
HOHamid Ossareh
Hamid Ossareh
This article presents a hierarchical multivariable control and constraint management approach for an air supply system for a proton exchange membrane fuel-cell (PEMFC) system. The control objectives are to track desired compressor mass airflow and cathode inlet pressure, maintain a minimum oxygen excess ratio (OER), and run the system at maximum net efficiency. A multi-input multi-output (MIMO) internal model controller (IMC) is designed and simulated to track flow and pressure setpoints, which showed high performance despite strongly coupled plant dynamics. A new setpoint map is generated to compute the most efficient cathode inlet pressure from the stack current load. To enforce OER constraints, a novel reference governor (RG) with the ability to govern multiple references (the cascade RG) and the ability to speed up as well as slow down a reference signal the cross section RG (CC-RG) is developed and tested. Compared with a single-input single-output (SISO) airflow control approach, the proposed MIMO control approach shows up to 7.36% lower hydrogen fuel consumption. Compared to a traditional load governor, the novel cascaded CC-RG shows up to 3.68% less mean absolute percent error (MAPE) on net power tracking and greatly improved worst case OER on realistic drive-cycle simulations. Two fuel-cell system (FCS) models were used for development and validation, a nonlinear open-source model and a proprietary Ford high-fidelity model.

9 August 2022 in IEEE Transactions on Smart Grid
Verified
Journal Article
Closed access
SBSarnaduti Brahma
Sarnaduti Brahma
AKAdil Khurram
Adil Khurram
HOHamid Ossareh
Hamid Ossareh
Mads AlmassalkhiMads Almassalkhi
Mads Almassalkhi
Packetized Energy Management (PEM) is a demand dispatch scheme that can be used to provide ancillary services such as frequency regulation. In PEM, distributed energy resources (DERs) are granted uninterruptible access to the grid for a pre-specified time interval called the packet length. This results in a down ramp-limited response in PEM for DERs that can only consume power from the grid. In this work, a linearized virtual battery model of PEM is provided that is capable of predicting the down ramp-limited output of PEM and is used in a model predictive control (MPC) framework to improve the performance of PEM in tracking an automatic generation control (AGC) signal. By performing statistical analysis on the AGC regulation signal, PJM Reg-D, an autoregressive moving average (ARMA) model is derived as a predictor for the MPC-based precompensator. Finally, as an alternative to MPC, it is shown that by varying the packet length as a function of time, for example through packet randomization, frequency regulation can be improved under PEM.

30 August 2019 in International Journal of Control
Verified
Journal Article
Closed access
HOHamid Ossareh
Hamid Ossareh
In this paper, we consider the problem of constraint management in Linear Periodic (LP) systems using Reference Governors (RG). First, we present the periodic-invariant maximal output admissible sets for LP systems. We extend the earlier results in the literature to Lyapunov stable LP systems with output constraints, which arise in RG applications. We show that, while the invariant sets for these systems may not be finitely determined, a finitely-determined inner approximation, which is periodically invariant, can be obtained by constraint tightening. We then analyze the geometric and algebraic relationship between these sets and show that these sets are related via simple transformations, implying that it suffices to compute only one of them for real-time applications. This greatly reduces the memory burden of RG (or other similar constraint management strategies), at the expense of an increase in processing requirements. We present a thorough analysis of this trade-off. In the second part of this paper, we present two RG formulations, and discuss their properties and algorithms for their computation. Numerical simulations demonstrate the efficacy of the approach.