In this study, groundwater springs potentiality maps were prepared using a novel integrated model, support vector regression (SVR) with genetic algorithm (GA), for the Jerash and Ajloun region, Jordan.The conditioning factors such as altitude, aspect, slope angle, plan curvature, stream power index, topographic wetness index, length of slope, distance from drainage network, lithology, distance from faults, land use and normalised difference vegetation index were considered to map the groundwater spring potentiality. GA was used for two purposes. First, GA was used to optimize the hyper-parameters of the radial basis function (RBF) kernel of SVR model. Second, GA in combination with SVR was used as feature selection (FS).The results of these models were compared with common grid search (GS) method used in most of the studies. The GS method was employed to calculate the parameters related to the SVR model and also hyper-parameters of RBF kernel. The results show optimum values of the kernels in the SVR model and selecting the optimal features which have the most contribution in modeling were the major steps in modeling and also in achieving a desirable precision level.
The groundwater contained in aquifers is among the most important water supply resources, especially in semi-arid and arid regions worldwide. This study aims to evaluate and compare the prediction capability of two well–known models, support vector machine (SVM) and adaptive neuro-fuzzy inference system (ANFIS), combined with a genetic algorithm (GA), invasive weed optimization (IWO), and teaching–learning-based optimization (TLBO) algorithms in groundwater potential mapping (GPM) the Azraq Basin in Jordan. The hybridization of the SVM and ANFIS models with the GA, IWO, and TLBO algorithms results in six models: SVM–GA, SVM–IWO, SVM–TLBO, ANFIS–GA, ANFIS–IWO, and ANFIS–TLBO. A database consisting of well data containing 464 wells with 12 predictive factors was developed for the groundwater potential mapping (GPM) of the study area. Of the 464 well locations, 70% (325 locations) were assigned for the training set and the rest (139 locations) for the validation set. The correlation between the 12 predictive factors and the well locations is analyzed using the frequency ratio (FR) statistical model. An area under receiver operating characteristic (AUROC) curve was used to evaluate and compare the models. According to the results, the SVM-based hybrid models outperformed other ANFIS hybrid models in the learning (training) and validation phases. The SVM–GA and SVM–TLBO hybrid models showed AUROC values of 0.984 and 0.971, respectively, in the training and validation phases. Moreover, the ANFIS–GA and ANFIS–TLBO hybrid models showed an AUROC of 0.979 and 0.984 in the training phase and an AUROC of 0.973 and 0.984 in the validation phase, respectively. The SVM–IWO and ANFIS–IWO hybrid models showed the lowest AUROC. This study demonstrated the more efficient results of the SVM-based hybrid models in comparison with the ANFIS-based hybrid models in terms of accuracy and modeling speed.
The significance of water harvesting in Wadi Hammad basin lies in the fact that the Jordanian government encourages the cultivation of vegetables, wheat, and barley in the country in an effort to improve food security in Jordan and create job opportunities for young people in the agricultural sector. Water harvesting in this basin will augment the water resources used for plant production and livestock watering by flash floods that involve large quantities of runoff. This study aimed to identify the best locations for water harvesting in the Wadi Hammad basin in Jordan via a Multi-Criterion Decision Analysis (MCDA) and indigenous knowledge. This study focused on consulting with indigenous knowledge where they provided information on the study area for water-collecting sites that have been used for years to provide water. In this study, site selection was based on six criteria that had been determined through a review of related literature (drainage density, rainfall depth, lineament density, soil clay content, geology, and slope). Following MCDA analysis, a water-harvesting suitability map was created. The final water-harvesting map uncovered that a large part of the basin (66.53%) has high to very high potential for water harvesting. The technique of water harvesting was subdued to statistical analysis, sensitivity analysis, and the map removal test. This study demonstrates that the selection of relevant water harvesting locations is a lengthy method that needs consultation with indigenous knowledge and the use of MCDA in the GIS environment. The study results, in general, and the final map, in particular, show the good relationship between the sites defined by the use of MCDA and the site suitability for water harvesting that was specified based on indigenous knowledge. Finally, the results of this study, which integrated indigenous knowledge with MCDA, may be employed to help in effective planning for water resource management to warrant the sustainable development of water in Jordan.
Dear Editor, I hope you are doing well, and I would like to thank you for inviting me to review this paper, First of all, I recommend accepting this manuscript for publication in your outstanding journal just after considering the following comment...