Liquefaction conversion technology has become one of the hottest biomass conversion methods due to its flexible material selection and extensive product applications. Exploring biomass liquefaction conversion focuses on catalysts, biomass/water ratio, and reaction temperature. However, it is found that solvents are crucial in the biomass liquefaction process and significantly impact the type of liquefied products and bio-oil yield. Given the current rapid development trend, timely sorting and summary of the solvent effect in the biomass liquefaction process can promote the subsequent development and industrialization of more efficient and cleaner biomass liquefaction technology. Therefore, this review first introduces the characteristics of water as the liquefaction solvent, then summarizes the effects of organic solvents on liquefaction, and finally elaborates on the synergistic effect of co-solvents, which provides a more systematic overview of solvent effects in the liquefaction process. Meanwhile, prospects are put forward for the future development of biomass liquefaction conversion.

Hydrothermal liquefaction technology (HTL) is a promising thermochemical method to convert biomass into novel liquid fuels. The introduction of oxides and inorganic acids/bases during the hydrothermal process significantly impacts the yield and composition of bio-oil. However, systematic research on their effects, especially at lower temperatures, remains limited. In this paper, we examine the effects of acidity and alkalinity on cotton stalk hydrothermal bio-oil by introducing homogeneous acids and bases. Given the operational challenges associated with product separation using homogeneous acids and bases, this paper further delves into the influence of heterogeneous oxide catalysts (possessing varying degrees of acidity and alkalinity, as well as distinct microstructures and pore architectures) on the production of cotton stalk hydrothermal bio-oil. The effects of nanoscale oxides (CeO₂, TiO₂, ZnO, Al₂O₃, MgO and SiO₂) and homogeneous acid–base catalysts (NaOH, K₂CO₃, Na₂CO₃, KOH, HCl, H₂SO₄, HNO₃) on the quality of cotton stalk bio-oil under moderate hydrothermal conditions (220 °C, 4 h) were investigated. Characterization techniques including infrared spectroscopy, thermogravimetric analysis, elemental analysis, and GC-MS were employed. The results revealed that CeO₂ and NaOH achieved the highest bio-oil yield due to Ce³⁺/Ce⁴⁺ redox reactions, OH-LCC disruption, and ionic swelling effects. Nano-oxides enhanced the formation of compounds like N-ethyl formamide and aliphatic aldehydes while suppressing nitrogen-containing aromatics. The total pore volume and average pore width of oxides negatively correlated with their catalytic efficiency. CeO₂ with low pore volume and width exhibited the highest energy recovery. The energy recovery of cotton stalk bio-oil was influenced by both acid and base sites on the oxide surface, with a higher weak base content favoring higher yields and a higher weak acid content inhibiting them. The findings of this research are expected to provide valuable insights into the energy utilization of agricultural solid waste, such as cotton stalks, as well as to inform the design and development of highly efficient catalysts.

As a potential therapeutic agent, the clinical application of S-nitrosoglutathione (GSNO) is limited because of its instability. Therefore, different formulations have been developed to protect GSNO from degradation, delivery and the release of GSNO at a physiological concentration in the active position. Due to the high water-solubility and small molecular-size of GSNO, the biggest challenges in the encapsulation step are low encapsulation efficiency and burst release. This review summarizes the different nano/micro-formulation strategies of a GSNO related delivery system to provide references for subsequent researchers interested in GSNO encapsulation.

Due to the continuous growth of global carbon dioxide emissions, the development of cost-effective carbon dioxide capture technology has attracted extensive attention. Amino-modified chitosan aerogels with lamellar porous structures are good candidates as carbon dioxide adsorbents because of their degradable properties and low energy consumption. Polyethylene polyamine-modified chitosan aerogels (PEPA-CSs) were prepared through a process of crosslinking and freeze-drying using a chitosan solution, polyethylene polyamine (PEPA), and epichlorohydrin (ECH) as raw materials. The amino group of PEPA was proven to be successfully grafted on the chitosan surface by FITR and XPS. The SEM and TEM analysis showed a rich three-dimensional porous structure and a good rigidity and bearing capacity of the PEPA-CS. The adsorption capacity was significantly increased by PEPA grafting with a maximum value of 1.59 mmol/g at 25 °C and 1 bar through both physical and chemical interactions, which indicates a potential for broad application prospects in industrial CO₂-capture applications.

The conversion of agricultural and forestry waste biomass materials into bio-oil by mild hydro-thermal technology has a positive effect on extending the agricultural industry chain and alleviating the world energy crisis. The interaction investigation of biomass components during bio-oil formation can be significant for the efficient conversion of lignocellulose when different raw materials are fed together. In this paper, a bio-oil pyrolysis behavior (thermogravimetric analysis, TG) perspective component interaction investigation of cotton stalks under low-temperature hydro-thermal conversion (220 °C) was studied. Cellulose, hemi-cellulose, lignin, and protein were used as lignocellulose model components, by their simple binary blending and multi-variate blending and combined with thermo-gravimetric analysis and gas chromatography-mass spectrometry (GC-MS) characterization and analysis. The interaction of different model components and real biomass raw material components in the hydro-thermal process was explored. Results showed that the components of hydro-thermal bio-oil from cotton stalks were highly correlated with the interactions between cellulose, hemi-cellulose, lignin, and protein. During the hydro-thermal process, cellulose and hemi-cellulose inhibit each other, which reduces the content of ketones, aldehydes, ethers, and alcohols in bio-oil. Interaction between cellulose and lignin was obvious, which promotes the formation of oligomers, such as ketones, aldehydes, esters, phenols, and aliphatic, while inhibiting the production of aromatic and multi-hybrid compounds. Otherwise, there was no obvious interaction effect between hemi-cellulose and lignin or between lignin and protein. This research will guide the industrialization of lignocellulose, especially the possible co-feed hydro-thermal conversion technology.