Hassan Tariq Chattha

Dr. Hassan Tariq Chattha

Focus College, BC, Canada
orcid

Research Focus & Metrics

Academic Career Length

18Years (2009-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2018 in IEEE Access
Verified
Journal Article
Open access
QAQasim Awais
Qasim Awais
YJYang Jin
Yang Jin
Hassan Tariq ChatthaHassan Tariq Chattha
Hassan Tariq Chattha
Mohsin JamilMohsin Jamil
Mohsin Jamil
Qiang HeQiang He
Qiang He
BKBilal A Khawaja
Bilal A Khawaja
A novel coplanar waveguide (CPW) fed rectenna with high efficiency is proposed and implemented in this article for 2.45 GHz Bluetooth/WLAN applications. The antenna has compact dimensions of 18 mm x 30 mm that is simulated and manufactured using a low-cost FR4 substrate with a thickness of 1.6 mm. A tuning stub technique with rectangular slots is used for better impedance matching and for enhancing the impedance bandwidth of the antenna with a peak gain of 5.6 dB. The proposed novel antenna for RF energy harvesting applications exhibits dipole-like radiation pattern in H-plane and omnidirectional pattern in E-plane with improved radiation efficiency. Single stage Cockcroft-Walton rectifier with L-shaped impedance matching network is designed in ADS and fabricated on FR4 substrate. The DC output of the rectenna is measured as 3.24 V with a load resistance of 5k Ω. A simulated peak conversion efficiency of 75.5% is attained while the measured one is observed to be 68% with an input signal power of 5 dBm at 2.45 GHz.

8 May 2018 in IEEE Access
Verified
Journal Article
Open access
KSKinza Shafique
Kinza Shafique
BKBilal A. Khawaja
Bilal A. Khawaja
MKMuhammad Daniyal Khurram
Muhammad Daniyal Khurram
SSSyed Maaz Sibtain
Syed Maaz Sibtain
YSYazir Siddiqui
Yazir Siddiqui
XYXiaodong Yang
Xiaodong Yang
Traditionally employed human-to-human (H2H) and human-to-machine (H2M) communication has recently been replaced by a new trend known as the Internet of things (IoT). IoT enables device-to-device (D2D) communication without any human intervention, hence, offers many challenges. In this paradigm, the machine’s self-sustainability due to limited energy capabilities presents a great challenge. Therefore, this paper proposed a low-cost energy harvesting device using rectenna to mitigate the problem in the areas, where battery constraint issues arise. So, an energy harvester is designed, optimized, fabricated and characterized for energy harvesting and IoT applications which simply recycles RF energy at 2.4GHz, from nearby Wi-Fi/WLAN devices and converts them to useful DC power. The physical model comprises of antenna, filters, and rectifier, etc. A rectangular patch antenna is designed and optimized to resonate at 2.4GHz using the well-known transmission-line model while the band-pass and low-pass filters are designed using lumped components. Schottky diode (HSMS-2820) is used for rectification. The circuit is designed and fabricated using the low-cost FR4 substrate h=1.6mm and εr = 4.6) having the fabricated dimensions of 285mm x 90mm. Universal software radio peripheral (USRP) and GNU Radio is employed to measure the received RF power, while similar measurements are carried out using R&S spectrum analyzer for validation. The received measured power is -64.4dBm at the output port of the rectenna circuit. Hence, our design enables a pervasive deployment of self-operable next generation IoT devices.

27 June 2019 in IEEE Access
Verified
Journal Article
Open access
Hassan Tariq ChatthaHassan Tariq Chattha
Hassan Tariq Chattha
In this paper, a compact, low-profile four-port, two-element antenna for the 5G Internet of Things (IoT) and handheld applications with height h = 3.0 mm is presented. The antenna structure contains two planar inverted-F antenna (PIFA) elements having the same shapes. Each antenna element has two feeding plates placed at the right angle to each other to make them cross-polarized for the exploitation of polarization diversity, whereas spatial diversity is employed by positioning two antennas diagonally on opposite sides of the antenna structure. For reducing mutual coupling, the etching of rectangular slots on each side of the ground plane beneath the top plate of each element has been done to stop the flow of current between two ports of the same antenna element. Maximum isolation achieved among ports is less than -25 dB, and envelope correlation coefficient is below 0.009 in bands of interest. The minimum frequency range covered by the four ports of this antenna is from around 2.7 to 3.6 GHz for S 11 <; -10 dB, thus covering expected future 5G band (3300-3600 MHz), and may be used for small portable and handheld the IoT and cellular applications as a diversity/MIMO antenna.

15 February 2021 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
Hassan Tariq ChatthaHassan Tariq Chattha
Hassan Tariq Chattha
MIMuhammad Muhammad Kamran Ishfaq
Muhammad Muhammad Kamran Ishfaq
BKBilal A Khawaja
Bilal A Khawaja
ASAbubakar Sharif
Abubakar Sharif
NSNATHIRULLA SHERIFF
NATHIRULLA SHERIFF
A low-profile, compact, four-element, eight-port multiple-input--multiple-output and diversity antenna for 5G Internet of Things and cellular handheld applications is presented in this letter. This antenna structure contains four antenna elements, which are same in its configuration. The antenna ground dimensions are taken similar to a modern mobile handset, i.e., 60 mm × 120 mm. The four antenna elements are situated at four corners of antenna ground structure. Each antenna element has two feeding ports, thus making a total of eight-port antenna. A single antenna element has two feeding plates, which are placed perpendicular to one another so that they become cross polarized, thus exploiting polarization diversity, whereas spatial diversity also exists between different antenna elements. For reducing mutual coupling between different antenna ports, slots are cut in ground plane, including a small strip etched along the entire length of ground plane and rectangular slots cut in ground plane under every antenna element. The minimum bandwidth attained by all eight ports for S 11 < –10 dB is more than 1.4 GHz from 2.4 GHz to more than 3.8 GHz, which testify that it covers majority of frequency bands allocated for 5G sub-6 GHz spectrum. The isolation obtained between different ports has a minimum value of –13 dB, and the maximum value goes below –30 dB. For the covered frequency bands by this antenna structure, the correlation coefficient is found to be below 0.03, whereas the measured peak gain is in the range of 3.2--5 dB.

10 October 2019 in IEEE Access
Verified
Journal Article
Open access
RSRashid Saleem
Rashid Saleem
MBMuhammad Bilal
Muhammad Bilal
Hassan Tariq ChatthaHassan Tariq Chattha
Hassan Tariq Chattha
Sabih ur RehmanSabih ur Rehman
Sabih ur Rehman
AMAnum Mushtaq
Anum Mushtaq
MSMuhammad Farhan Shafique
Muhammad Farhan Shafique

17 January 2019 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
ASAbubakar Sharif
Abubakar Sharif
JOJun Ouyang
Jun Ouyang
FYFeng Yang
Feng Yang
Hassan Tariq ChatthaHassan Tariq Chattha
Hassan Tariq Chattha
Muhammad ImranMuhammad Imran
Muhammad Imran
Qammer AbbasiQammer Abbasi
Qammer Abbasi
The radio frequency identification (RFID) has emerged Internet of Things (IoT) into the identification of things. This paper presents, a low-cost smart refrigerator system for future IoT applications. The proposed smart refrigerator is used for automatic billing and restoring of beverage metallic cans. The metallic cans can be restored by generating a product shortage alert message to a nearby retailer. To design a low-cost and low-profile tag antenna for metallic items is very challenging, especially when mass production is required for item-level tagging. Therefore, a novel ultrahigh frequency (UHF) RFID tag antenna is designed for metallic cans by exploiting the metallic structure as the main radiator. Applying characteristics mode analysis, we observed that some characteristic modes associated with the metallic structure could be exploited to radiate more effectively by placing a suitable inductive load. Moreover, a low cost, printed (using conductive ink) small loop integrated with meandered dipole used as an inductive load, which was also connected with RFID chip. The 3-dB bandwidth of the proposed tag covers the whole UHF band ranging from 860 to 960 MHz when embedded with metal cans. The measured read range of the RFID tag is more than 2.5 m in all directions to check the robustness of the proposed solution. To prove the concept, a case study was performed by placing the tagged metallic cans inside a refrigerator for automatic billing, 97.5% tags are read and billed successfully. This paper paves the way for tagging metallic bodies for tracking applications in domains ranging from consumer devices to infotainment solutions, which enlightens a vital aspect for the IoT.