Hossein Shahinzadeh

Dr. Hossein Shahinzadeh

Amirkabir University of Technology, Tehran, Tehrān, Iran
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019
Verified
Conference Paper
Closed access
Hossein ShahinzadehHossein Shahinzadeh
Hossein Shahinzadeh
Jalal MoradiJalal Moradi
Jalal Moradi
Gevork B. GharehpetianGevork B. Gharehpetian
Gevork B. Gharehpetian
HNHamed Nafisi
Hamed Nafisi
MAMehrdad Abedi
Mehrdad Abedi
The tremendous advances in information and communications technology (ICT), as well as the embedded systems, have been led to the emergence of the novel concept of the internet of things (IoT). Enjoying IoT-based technologies, many objects and components can be connected to each other through the internet or other modern communicational platforms. Embedded systems which are computing machines for special purposes like those utilized in high-tech devices, smart buildings, aircraft, and vehicles including advanced controllers, sensors, and meters with the ability of information exchange using IT infrastructures. The phrase "internet", in this context, does not exclusively refer to the World Wide Web rather than any type of server-based or peer-to-peer networks. In this study, the application of IoT in smart grids is addressed. Hence, at first, an introduction to the necessity of deployment of IoT in smart grids is presented. Afterwards, the applications of IoT in three levels of generation, transmission, and distribution is proposed. The generation level is composed of applications of IoT in renewable energy resources, wind and solar in particular, thermal generation, and energy storage facilities. The deployment of IoT in transmission level deals with congestion management in power system and guarantees the security of the system. In the distribution level, the implications of IoT in active distribution networks, smart cities, microgrids, smart buildings, and industrial sector are evaluated.

1 February 2019
Verified
Conference Paper
Closed access
Hossein ShahinzadehHossein Shahinzadeh
Hossein Shahinzadeh
Jalal MoradiJalal Moradi
Jalal Moradi
Gevork B. GharehpetianGevork B. Gharehpetian
Gevork B. Gharehpetian
HNHamed Nafisi
Hamed Nafisi
MAMehrdad Abedi
Mehrdad Abedi
The accelerated trend of development in the areas of information and communications technology (ICT), as well as energy systems, has been led to emersion of a new concept called the internet of energy (IoE). This concept is classified as a subsector of the internet of things (IoT), which means the utilization of advanced digital controllers, sensors, actuators, and meters with the ability of information exchange through IT infrastructures. The phrase "internet", in this context, does not exclusively refer to the World Wide Web rather than any type of server-based or peer-to-peer network. These communicational tools are able to receive information for local analyze and control, receive analyzed commands, send raw data, or send instructions. The incorporation of IoT in power systems conveys a brilliant future for overcoming power system operation hurdles and environmental challenges, although it incurs a large capital investment portfolio initially. However, it is hoped that the evolution of current technologies and the advent of new technologies with economically affordable prices can help to increase the pervasiveness of these state-of-the-art technologies. IoE covers the entire energy scope such as thermal or electrical energies. However, in this study, the applications of IoE in power systems, as the central core of the energy ecosystem, will be addressed. At first, the basic terminology of this topic such as IoE, IoT, plug & play capability, smart energy, future networks, smart grid 2.0, energy 4.0, prosumers, AMI, API, digitalization, and grid edge are described to make the rest of paper more intelligible. Then the role of IoE in supply-side and demand-side of power systems encompassing renewable generation section, large-scale energy storage section, thermal power plant section, system operation and protection as well as execution of demand response programs (DRPs), microgrids, integration of plug-in electric vehicles with V2G capability, and end-user residential consumption management in smart buildings are explained. In this study, it is tried to outline a different classification of IoE in power systems which has not been drawn by previous similar works.

1 December 2017 in Energy
Verified
Journal Article
Closed access
Jalal MoradiJalal Moradi
Jalal Moradi
Hossein ShahinzadehHossein Shahinzadeh
Hossein Shahinzadeh
AKAmirsalar Khandan
Amirsalar Khandan
MMMajid Moazzami
Majid Moazzami

6 December 2021 in IEEE Access
Verified
Journal Article
Open access
SABO ALIYUSABO ALIYU
SABO ALIYU
NOOR IZZRI ABDUL WAHABNOOR IZZRI ABDUL WAHAB
NOOR IZZRI ABDUL WAHAB
MOMohammad Lutfi Othman
Mohammad Lutfi Othman
MJMai Zurwatul Ahlam Binti Mohd Jaffar
Mai Zurwatul Ahlam Binti Mohd Jaffar
Hakan AcikgozHakan Acikgoz
Hakan Acikgoz
Hossein ShahinzadehHossein Shahinzadeh
Hossein Shahinzadeh
Low frequency oscillations (LFOs) occur in a system of interconnected generators connected by weak interconnection. A power system stabilizer (PSS) is commonly used to improve the capacity of the power system dampening. Under a variety of operating conditions, traditional PSSs fail to deliver superior damping. To address this issue, a Farmland Fertility Algorithm (FFA-PSSs controller) was used to solve an optimization problem for optimal design of PSSs system parameters, and its performance efficiency was compared to GA and PSO-based PSSs controllers. In addition to PSS, flexible current transmission (FACTS) devices are widely used. PSSs controllers and FACTS devices are frequently constructed in tandem to improve the dampening efficiency of the system. In this study, an Interline Power Flow Controller (IPFC) FACTS device will be added to the PSSs controller to improve the power system’s oscillatory stability. PSSs optimal design and supplemental controller of power fluctuations for IPFC were conducted out on WSCC multi-machine test systems using a system linear model. Using time-domain simulations and quantitative analysis, the proposed IPFC model was compared to the FFA-PSSs controller in terms of performance and efficiency. The main disadvantage of this technique is the difficulty in designing a dynamic IPFC model in test systems, as well as the burden of IPFC coordinated PSSs optimization. In both PSSs design using FFA method and FFA-optimized PSS with IPFC cases, rise in the computational and simulation costs was found unavoidable. To compensate for these flaws and obtain the research contribution, this paper proposes a Neuro-Fuzzy Controller (NFC) developed as a damping controller that can take the place of the two controllers (research objectives three). The application of the NFC substitute the computational and simulation cost involved in designing multi-machine PSS and IPFC-FACTS systems simultaneously. With the availability of NFC in SIMULINK, a dynamic model of the WSCC three-machine system was developed under a variety of operating situations. Quantitative analysis results from the WSCC test system simulation show that when comparing the proposed NFC model to the IPFC model for the WSCC test system, the proposed NFC model was found to be 149 percent and 0 percent efficient in terms of the time to settle of rotor angle respond for G2 and G3, respectively, but 394 percent efficient when compared to the uncontrolled model. The decreased settling time values ensured the proposed NFC model’s efficacy in damping down the LFO and achieving superior stability over the two controllers. The proposed NFC model has shown significant performance improvement in both the transient and steady-state areas than when the system was design with the two damping controllers.

1 May 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ANAmin Foroughi Nematollahi
Amin Foroughi Nematollahi
Hossein ShahinzadehHossein Shahinzadeh
Hossein Shahinzadeh
HNHamed Nafisi
Hamed Nafisi
Behrooz VahidiBehrooz Vahidi
Behrooz Vahidi
Yassine AMIRATYassine AMIRAT
Yassine AMIRAT
Mohamed BenbouzidMohamed Benbouzid
Mohamed Benbouzid
In this study, a microgrid scheme encompassing photovoltaic panels, an energy storage system, and a diesel generator as a backup supply source is designed, and the optimal placement for installation is suggested. The main purpose of this microgrid is to meet the intrinsic demand without being supplied by the upstream network. Thus, the main objective in the design of the microgrid is to minimize the operational cost of microgrid’s sources subject to satisfy the loads by these sources. Therefore, the considered problem in this study is to determine the optimal size and placement for generation sources simultaneously for a microgrid with the objectives of minimization of cost of generation resources along with mitigation of power losses. In order to deal with uncertainties of PV generation and load forecasting, the lognormal distribution model and Gaussian process quantile regression (GPQR) approaches are employed. In order to solve the optimization problem, the lightning attachment procedure optimization (LAPO) and artificial bee colony (ABC) methods are employed, and the results are compared. The results imply the more effectiveness and priority of the LAPO approach in comparison with ABC in convergence speed and the accuracy of solution-finding.

17 March 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
Usman MehmoodUsman Mehmood
Usman Mehmood
Ephraim AgyekumEphraim Agyekum
Ephraim Agyekum
Salah KamelSalah Kamel
Salah Kamel
Hossein ShahinzadehHossein Shahinzadeh
Hossein Shahinzadeh
Ata Jahangir MoshayediAta Jahangir Moshayedi
Ata Jahangir Moshayedi
This research is mainly aimed at determining the effect of renewable energy (RE), education expenditures, and CO2 emissions on health expenditures in selected South Asian countries. There is an insufficient number of studies that investigate the linkages between health expenditures (HE) and CO2 emissions in South Asian countries. This study combined RE and gross domestic product (GDP) to identify their effect on health spending. We utilized the annual data of 1990–2018, and applied FMOLS and DOLS estimators over the panel data of five South Asian countries. According to the DOLS and FMOLS long-run results, GDP, RE, and education expenditures are negatively associated with health expenditures. This suggests that renewable energy puts less pressure on environmental quality, which leads to less health spending in the five South Asian countries studied. The empirical results also show that HE and CO2 emissions are positively and significantly related, which implies that an increase in CO2 emissions increases the financial burden on the various countries’ health sector. This study, therefore, recommends the usage of renewable sources to improve public health and to help lower health expenditures. To achieve sustainable development, it is also important to increase investment in the educational sector in the various countries.