The extraordinary optoelectronic properties of platinum diselenide (PtSe2), whose structure is similar to graphene and phosphorene, has attracted great attention in new rapidly developed two-dimensional (2D) materials beyond the other 2D material family members. We have investigated the surface plasmon resonance (SPR) sensors through PtSe2 with the transfer matrix method. The simulation results show that the anticipated PtSe2 biochemical sensors have the ability to detect analytic. It is evident that only the sensitivities of Ag or Au film biochemical sensors were observed at 118°/RIU (refractive index unit) and 130°/RIU, whereas the sensitivities of the PtSe2-based biochemical sensors reached as high as 162°/RIU (Ag film) and 165°/RIU (Au film). The diverse biosensor sensitivities with PtSe2 suggest that this kind of 2D material can adapt SPR sensor properties.
Perovskite solar cells (PSCs) are the most promising substitute for silicon-based solar cells. However, their power conversion efficiency and stability must be improved. The recombination probability of the photogenerated carriers at each interface in a PSC is much greater than that of the bulk phase. The interface of a perovskite polycrystalline film is considered to be a defect-rich area, which is the main factor limiting the efficiency of a PSC. This review introduces and summarizes practical interface engineering techniques for improving the efficiency and stability of organic–inorganic lead halide PSCs. First, the effect of defects at the interface of the PSCs, the energy level alignment, and the chemical reactions on the efficiency of a PSC are summarized. Subsequently, the latest developments pertaining to a modification of the perovskite layers with different materials are discussed. Finally, the prospect of achieving an efficient PSC with long-term stability through the use of interface engineering is presented.
Germanium selenide (GeSe) has attracted considerable research interest due to its unique photoelectric characteristics: high abundance occurrence, low toxicity, high stability, and environmentally sustainable. To the best of our knowledge, less literature is available on the nonlinear optical (NLO) properties of GeSe and on its significance of the electronic structure. In this work, the GeSe nanoflake ethanol suspensions have been studied by using liquid phase exfoliation method and then characterized by Raman, transmission electron microscopy (TEM), transmittance and atomic force microscopy (AFM). The NLO properties of GeSe suspensions with different concentration are investigated by Z-scan and spatial self-phase modulation (SSPM) methods with continuous wave laser, which are coherent with the parameter nonlinear refractive index n2 and the third order nonlinear polarizabilities χ(3). The nonlinear refractive index n2 of GeSe dispersions basically occur in the order of 10-9 cm2/W for Z-scan methods and 10-6 cm2/W for SSPM technique, whereas the third-order nonlinear polarizabilities χ(3) total are within the range of 10-6 esu for SSPM method. On the basis of these substantial characteristics of the NLO response and high stability of the 2D GeSe, we have experimentally studied the applications of the GeSe suspensions on all-optical information conversion technique.
Surface plasmon resonance (SPR) biosensors, with germanium sulfide (GeS) as a sensitive medium and Al/Ag/Au as the metal layers, are reported as we aim to improve the sensitivities of the biosensors. The sensitivities in conventional SPR biosensors, consisting of only metal Al, Ag, and Au layers, are 111°/RIU, 117°/RIU, 139°/RIU, respectively. Additionally, these sensitivities of the SPR biosensors based on the GeS-Al, GeS-Ag, and GeS-Au layers have an obvious improvement, resultant of 320°/RIU, 295°/RIU, and 260°/RIU, respectively. We also discuss the changing sensing medium GeS thickness using layer number to describe the scenario which brought about the diversification on the figure of merit (FOM) and optical absorption (OA) performance of the biosensors. These biosensors show obvious improvement of sensitivity and have strong SPR excitation to analytes; we believe that these kind biosensors could find potential applications in biological detection, chemical examination, and medical diagnosis.
A framing camera using pulse-dilation technology is reported in this article. The camera uses pulse dilation of an electron signal from a pulsed photo-cathode (PC) to achieve high temporal resolution. While the PC is not pulsed, the measured temporal resolution of the camera without pulse-dilation is about 71 ps. While the excitation pulse is applied on the PC, the measured temporal resolution is improved to 4 ps by using the pulse-dilation technology. The spatial resolution of the dilation framing camera is also measured, which is better than 100 μm. The relationship between the temporal resolution and the PC bias voltage is obtained. The variation of the temporal resolution with the gradient of the PC excitation pulse is also provided.
TaS2 as transition metal dichalcogenide (TMD) two-dimensional (2D) material has sufficient unstructured bonds and large inter-layer spacing, which highly supports transporting and absorbing mercury ions. The structural characterizations and simulation data show that an SPR sensor with high sensitivity can be obtained with a TaS2 material-modified sensitive layer. In this paper, the role of TaS2 nanoparticles in an SPR sensor was explored by simulation and experiment, and the TaS2 layer in an SPR sensor was characterized by SEM, elemental mapping, XPS, and other methods. The application range of structured TaS2 nanoparticles is explored, these TaS2 based sensors were applied to detect Hg2+ ions at a detection limit approaching 1 pM, and an innovative idea for designing highly sensitive detection techniques is provided.