Huang Shunjie

Dr. Huang Shunjie

Anhui University of Science and Technology, Huainan, Anhui, China
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 November 2022 in Processes
Verified
Journal Article
Open access
PDF file
Huang ShunjieHuang Shunjie
Huang Shunjie
GZGuangming Zhao
Guangming Zhao
XMXiangrui Meng
Xiangrui Meng
XCXiang Cheng
Xiang Cheng
Qingheng GuQingheng Gu
Qingheng Gu
SZShikui Zhu
Shikui Zhu
The problem needs to be solved about stability control of small coal pillars along goaf in the coal mining process. In this paper, the effects of water reducer, accelerator and expansion agent on the fluidity, setting time, expansion ratio and stone body strength of grouting materials were analyzed through orthogonal experiments, and the optimal ratio of grouting materials was obtained, and it is applied to the engineering site to obtain the reinforcement effect of the coal pillar grouting material on the coal pillar. The results of the study show that: When the dosage of the accelerating agent is 4%, the amount of water-reducer is 0.3%, and the amount of the expansive agent is 6%, the comprehensive performance of the grouting material is the best. After using the new coal pillar grouting material to strengthen the coal pillars, 30 days of monitoring were conducted to determine the deformation of the surrounding rock of the roadway. The shallow separation layer of the surrounding rock of the roadway was about 39.6~52.5 mm, and the accumulated separation layer of the deep rock was 28.5~29.5 mm, which were kept within the safe control range. The coal pillar grouting material can well fill the surrounding rock fissures and coupling and cement the broken rock mass, improve the bearing capacity of the narrow coal pillar, and enhance the overall stability of the surrounding rock of the roadway. The research results have important reference significance for similar coal pillar grouting.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
XCXiang Cheng
Xiang Cheng
GZGuangming Zhao
Guangming Zhao
YLYingming Li
Yingming Li
XMXiangrui Meng
Xiangrui Meng
QTQingyi Tu
Qingyi Tu
ZQZhihong Qin
Zhihong Qin
The protective layer mining method of the traditional deep coal seam in has been confronted with great challenges, and it is difficult for coal and gas to be extracted together. Taking the occurrence conditions of III1 mining area of Luling Coal Mine located at Huaibei, China, as engineering background, the influence law of the lithology on stress environment in front of the stope was analyzed by theoretical analysis and numerical simulations. The mining‐induced mechanical effect of coal‐rock mass was studied under different protective layer mining modes. The results showed that the peak value of the advanced abutment pressure decreased with the decrease of lithologic strength under the same mining conditions. For simulated geological conditions, the stress concentration coefficient of soft rock and coal seam protective layer mining modes was 1.9 and 1.7, respectively. Under the mining stress path of different protective layers, the ratio of axial stress increase and confining pressure unloading in secondary unloading phase were 2 : 1 and 1.5 : 1, respectively. The axial stress‐strain curves of different protective layer mining modes had similar trends, and they had a volume expansion at the end of unloading (failure stage). In addition, it revealed the pressure‐relief antireflection mechanism of the protective layer mining. Under the same confining pressure condition, the peak stress and peak strain increased with the increase of loading and unloading velocity ratio. The reduced value of the confining pressure increased, while the volume expansion decreased at failure. The results were applied to III1 mining area in soft rock protective layer mining, which created the mining way of traditional coal seam protective layer. Furthermore, the gas control technology of soft rock protective layer working face was put forward for deep coal seam with low permeability and high gas, enriching the pressure‐relief mining theory of protective layer.

29 January 2021 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
SKSiming Kao
Siming Kao
GZGuangming Zhao
Guangming Zhao
XMXiangrui Meng
Xiangrui Meng
YLYingming Li
Yingming Li
ZLZenghui Liu
Zenghui Liu
Huang ShunjieHuang Shunjie
Huang Shunjie
In order to investigate the dynamic mechanical properties of the fractured rocks reinforced with different slurries, the prefractured and grouted sandy mudstone specimens were tested on a Split Hopkinson Pressure Bar (SHPB), and their dynamic failure processes were shot via a high‐speed camera. The test results showed that under dynamic loading, grouting reinforcement can relieve the rock failure at the fracture part. With the increase of the impact speed, the dynamic specific strength of the modified epoxy resin grouting increases from 0.85 to 1.01, and its specific strain rate increases from 1.09 to 1.04; the dynamic specific strength and specific strain rate of cement slurry grouting increase from 1.78 to 0.95 and from 0.60 to 0.98, respectively. As a whole, the specimen reaches or approaches the dynamic parameters of the intact rock specimen after grouting repair, the stability of the rock reinforced by modified epoxy resin grouting is superior to that of the rock reinforced by cement slurry grouting, and the latter can acquire high dynamic strength under low‐speed impact. The improved damage‐type Zhuwangtang (ZWT) model can be used to describe the dynamic mechanical behaviors of the fractured rocks reinforced by grouting very well.

12 September 2022 in Processes
Verified
Journal Article
Open access
PDF file
Huang ShunjieHuang Shunjie
Huang Shunjie
GZGuangming Zhao
Guangming Zhao
XMXiangrui Meng
Xiangrui Meng
XCXiang Cheng
Xiang Cheng
WXWensong XU
Wensong XU
GLGang Liu
Gang Liu
In view of the problems associated with the poor stability of coal walls, coal slide and leakage of top-coal at the tunnel excavation working face under a soft and extra-thick coal roof, the surrounding rock at the tunnel excavation working face must be strengthened. The theoretical analysis of rock pressure, numerical simulation and other methods were comprehensively used to study the coal-wall-slicing mechanism. Given the characteristics of a soft and extra-thick coal roof, the combined supporting technology of “coal wall water injection + metal roof frame” is proposed. The findings show that in the process of roadway excavation, the coal–rock junctions of the wall and the middle part of the roof are weak areas that are prone to spalling and therefore need to be strengthened. Laboratory tests determined the moisture content of the coal body during tunneling to provide data for the parameter design of coal wall water injection. Safe and efficient excavation of the roadway was ensured by injecting water into the coal wall in combination with a metal roof protection skeleton. The application of this technology not only effectively prevents rib spalling but improves control of the deformation of the surrounding rock. During 40 days of field observation, the maximum deformation of the roof was 24.8 mm, and the distance between the two roadway walls was 21.5 mm. The deformation of the roadway was controlled within a safety zone. The application of this technology reduced the repair rate of the roadway and improved the efficiency of the roadway excavation. It brought significant economic benefits and provides an important reference for similar mines.

1 January 2021 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
Huang ShunjieHuang Shunjie
Huang Shunjie
XMXiangrui Meng
Xiangrui Meng
GZGuangming Zhao
Guangming Zhao
YLYingming Li
Yingming Li
XCXiang Cheng
Xiang Cheng
Gang LiuGang Liu
Gang Liu
It is difficult to support roadway with anchor cable in view of impact tendency in impinging liability roadway; a new material of inorganic and high‐performance full‐length anchoring material for anchoring cable is developed by adding several modifiers with ultrafine cement as the main material. The purpose is to improve the mechanical properties and durability of cement‐based materials, improve the coordination of anchor cable support system, and ensure the stability of surrounding rock of mining roadway. The new full‐length anchoring material is developed by optimizing the proportion of different components of the material, and the mechanical properties of the new material were studied. The anchoring force of resin anchoring agent, ordinary Portland cement, blank ultrafine cement, and new full‐length anchoring material are tested. Based on SEM microscopic characterization, the fracture types and failure characteristics of resin anchoring agent and full‐length anchoring material are researched. The results show that the optimal content of each component of the new inorganic high‐performance full‐length anchorage material is as follows: the content of component A is 15%, the content of component B is 3%, the content of component C is 0.2%, the content of component D is 1%, and the content of component E is 1%; the tensile test shows that the full‐length anchoring material has good bonding property, high anchoring strength, strong stability, and good rock coupling. SEM microstructure and morphology analysis have showed that the new anchorage materials can fully hydrate each other, resulting in a relatively dense stone body. The new full‐length anchoring material can effectively improve the anchoring force and improve the stability of the anchor cable and has significant performance advantages and good engineering applicability, and it has the advantages of lower cost and safer to use. The new material is a very good supporting material for roadway.

11 November 2025 in Coatings
Verified
Journal Article
Open access
PDF file
Huang ShunjieHuang Shunjie
Huang Shunjie
XMXiangrui Meng
Xiangrui Meng
GZGuangming Zhao
Guangming Zhao
XCXiang Cheng
Xiang Cheng
XWXiangqian Wang
Xiangqian Wang
KXKangshuo Xia
Kangshuo Xia
The accurate real-time delineation of overburden failure zones, specifically the caved and water-conducted fracture zones, remains a significant challenge in longwall mining, as conventional monitoring methods often lack the spatial continuity and resolution for precise, full-profile strain measurement. Based on the hydrogeological data of the E9103 working face in Hengjin Coal Mine, a numerical calculation model for the overburden strata of the E9103 working face was established to simulate and analyze the stress distribution, failure characteristics, and development height of the water-conducting fracture zones in the overburden strata of the working face. To address this problem, this study presents the application of a distributed optical fiber sensing (DOFS) system, centering on an innovative fiber installation technology. The methodology involves embedding the sensing fiber into boreholes within the overlying strata and employing grouting to achieve effective coupling with the rock mass, a critical step that restores the in situ geological environment and ensures measurement reliability. Field validation at the E9103 longwall face successfully captured the dynamic evolution of the strain field during mining. The results quantitatively identified the caved zone at a height of 13.1–16.33 m and the water-conducted fracture zone at 58–60.6 m. By detecting abrupt strain changes, the system enables the back-analysis of fracture propagation paths and the identification of potential seepage channels. This work demonstrates that the proposed DOFS-based monitoring system, with its precise spatial resolution and real-time capability, provides a robust scientific basis for the early warning of roof hazards, such as water inrushes, thereby contributing to the advancement of intelligent and safe mining practices.