Huigui Li

Prof. Huigui Li

Guizhou University of Engineering Science
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2017 in Journal of Applied Geophysics
Verified
Journal Article
Closed access
Huigui LiHuigui Li
Huigui Li
HLHuamin Li
Huamin Li
BGBaobin Gao
Baobin Gao
WWWen Wang
Wen Wang
CLChuang Liu
Chuang Liu

16 March 2017 in International Journal of Coal Science & Technology
Verified
Journal Article
Open access
PDF file
Huigui LiHuigui Li
Huigui Li
HLHuamin Li
Huamin Li
The mechanical properties and acoustic emission characteristics of thick hard roof sandstone were investigated. Samples were taken from the 30.87-m thick sandstone roof in a mine in the Shengdong coal field, China. Firstly, the composition and microscopic characteristics were analyzed by XRD and FE-SEM, respectively. Moreover, the indirect tensile test, uniaxial compression test, three axis compression experiment and AE test are carried out by using RMT-150C mechanics experiment system with DS5-8B AE test system. The experiment results indicate that the main framework particles of sandstone are quartz and feldspar, and mainly quartz. Cements are mainly pyrite, kaolinite, chlorite and zeolite cross needle, clinochlore, and clay minerals. The microstructure of sandstone is very dense, with few pores and high cementation degree. The tensile strength, compressive strength and elastic modulus of sandstone are 4.825, 85.313 MPa, 13.814 GPa, respectively, so the sandstone belongs to hard rock. The AE cumulative counts of sandstone can be divided into three phases: relatively flat growth period, rapid growth period and spurt period. The signal strength of AE waveform can be used as a warning signal. In the tensile fracture zone, the warning value is 0.4 mV, and in the compression shear failure zone, it is 4 mV. The numbers of cumulative counts of AE under different stress conditions have obvious difference. Moreover, the growth of cumulative counts of acoustic emission is more obvious when the stress is more than 60% of the peak stress.

1 January 2015 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
HLHuamin Li
Huamin Li
Huigui LiHuigui Li
Huigui Li
BGBaobin Gao
Baobin Gao
DJDongjie Jiang
Dongjie Jiang
JFJunfa Feng
Junfa Feng
To study the effect of loading rate on mechanical properties and acoustic emission characteristics of coal samples, collected from Sanjiaohe Colliery, the uniaxial compression tests are carried out under various levels of loading rates, including 0.001 mm/s, 0.002 mm/s, and 0.005 mm/s, respectively, using AE-win E1.86 acoustic emission instrument and RMT-150C rock mechanics test system. The results indicate that the loading rate has a strong impact on peak stress and peak strain of coal samples, but the effect of loading rate on elasticity modulus of coal samples is relatively small. When the loading rate increases from 0.001 mm/s to 0.002 mm/s, the peak stress increases from 22.67 MPa to 24.99 MPa, the incremental percentage is 10.23%, and under the same condition the peak strain increases from 0.006191 to 0.007411 and the incremental percentage is 19.71%. Similarly, when the loading rate increases from 0.002 mm/s to 0.005 mm/s, the peak stress increases from 24.99 MPa to 28.01 MPa, the incremental percentage is 12.08%, the peak strain increases from 0.007411 to 0.008203, and the incremental percentage is 10.69%. The relationship between acoustic emission and loading rate presents a positive correlation, and the negative correlation relation has been determined between acoustic emission cumulative counts and loading rate during the rupture process of coal samples.

1 January 2021 in Shock and Vibration
Verified
Journal Article
Open access
PDF file
GXGuosheng Xu
Guosheng Xu
Huigui LiHuigui Li
Huigui Li
DLDe-Hai Li
De-Hai Li
YZYan-Bin Zhang
Yan-Bin Zhang
Mining‐induced fracture of overburden strata is intimately related to underground water disasters in coal mining. In this work, we develop an analytical model that uses the probability integral method to calculate the subsidence of the subsurface and the overburden strata. In the developed model, according to the failure characteristics of the mining‐induced strata, the horizontal deformation of the strata is expressed by the tensile rate of the elastic plate’s neutral plane to reflect the degree of fracture initiation and expansion. The distribution of the water‐flowing fractured zone (WFZ) in the overburden strata is calculated by substituting the probability integral function of overburden strata movement into the equation of layer tensile rate. The panel 31071 in Peigou coal mine is taken as a case study, and the height of the water‐flowing fractured zone (HWFZ) is determined by the proposed method. Conventional empirical methods and the proposed method are used to predict HWFZ in panels with mining schemes, and the results show that the model is particularly advantageous for inclined coal seam mining where the inclined mining size gradually increases and the coal seam burial depth gradually decreases. In such kind of situations, the overburden strata movement and deformation intensify and the mining fracture develops further with the progress of mining, a feature considered poorly by conventional empirical methods but well represented in the proposed method.

1 January 2020 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
Huigui LiHuigui Li
Huigui Li
ZYZhengkai Yang
Zhengkai Yang
HLHuamin Li
Huamin Li
The mechanics of rock mass is significantly affected by joints, but many existing studies of jointed rocks make simplifications that do not consider the joint thickness. To further study the influence of joint thickness on rock mechanics (mechanical properties, failure mechanism, damage model, etc.), we fabricated jointed siltstone specimens with different joint thickness (5, 10, 15, and 20 mm) and the specimens were subjected to uniaxial compression tests. The effects of joint thickness on the uniaxial compression strength (UCS), the strain at UCS, the elastic modulus, and the stress‐strain curves were thus analyzed. For the stress‐strain curve, with rising joint thickness, the upper concave in the initial compression stage intensified, the slope of the stress‐strain in the elastic stage decreased, and the sudden stress drop after peak strength became more obvious. Both the peak compression strength and the elastic modulus gradually decreased with rising joint thickness, but a positive correlation was found between the strain at UCS and the joint thickness.

31 May 2022 in Frontiers in Earth Science
Verified
Journal Article
Open access
Huigui LiHuigui Li
Huigui Li
JWJun WANG
Jun WANG
XWXiaohe Wang
Xiaohe Wang
WLWanliang Liang
Wanliang Liang
GXGuosheng Xu
Guosheng Xu
YKYingchun Kang
Yingchun Kang
In order to study the influence of water saturation time on the mechanical properties of jointed limestone, the joint limestone samples with a crack length of 20 mm and a crack angle of 30° are saturated with water for 0, 1, 3, 5 and 7 days and tested with the RMT-150C mechanical test machine. The results show that the water saturation time has a significant effect on the stress-strain curve, peak strength, elastic modulus, crack development and failure characteristics of the jointed limestone. There is a step rise or fall phenomenon near the peak stress. The peak strength and elastic modulus of the joint limestone are significantly negatively correlated with the saturated time. Compared with that of the saturated 0-day sample, the peak compressive strength of the saturated 1-day, 3-day, 5-day and 7-day samples was decreased by 16.5%, 24.7%, 43.6%, and 47.7%, respectively, and the elastic modulus decreased by 11.0%, 32.0%, 45.0%, and 67.9%, respectively. Saturated water cracks the skeleton particles of the limestone samples, and the length of the microscopic pores and fissures increased gradually. The phenomenon that the number and length of cracks increase with the increase of the water saturation time will weaken the mechanical properties of the jointed limestone. The physical and chemical reactions, lubrication, and pore water pressure produced by water-saturated water-rock interactions make it easier for the Mohr stress circle to reach the limit equilibrium state. Saturated water reduces the degree of fragmentation of the sample, and the integrity of the fracture surface is higher after failure. The findings in this paper are helpful to further reveal the mechanism of the crushing of supports and the frequent occurrence of water gushing accidents at the working face in the Xinhua region of northwestern Guizhou.