Wind energy is one of the fastest growing sources of energy worldwide. This is clear from the high volume of wind power applications that have been increased in recent years. However, the uncertain nature of wind speed induces several challenges towards the development of efficient applications that require a deep analysis of wind speed data and an accurate wind energy potential at a site. Therefore, wind speed forecasting plays a crucial rule in reducing this uncertainty and improving application efficiency. In this paper, we experimented with several forecasting models coming from both machine-learning and deep-learning paradigms to predict wind speed in a metrological wind station located in East Jerusalem, Palestine. The wind speed data were obtained, modelled, and forecasted using six machine-learning techniques, namely Multiple Linear Regression (MLR), lasso regression, ridge regression, Support Vector Regression (SVR), random forest, and deep Artificial Neural Network (ANN). Five variables were considered to develop the wind speed prediction models: timestamp, hourly wind speed, pressure, temperature, and direction. The performance of the models was evaluated using four statistical error measures: Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE), and coefficient of determination (R2). The experimental results demonstrated that the random forest followed by the LSMT-RNN outperformed the other techniques in terms of wind speed prediction accuracy for the study site.
6 September 2022 in Journal of Applied Crystallography
The nuclear and magnetic structures of Mn3Fe2Si3 are investigated in the temperature range from 20 to 300 K. The magnetic properties of Mn3Fe2Si3 were measured on a single crystal. The compound undergoes a paramagnetic to antiferromagnetic transition at TN2 ≃ 120 K and an antiferromagnetic to antiferromagnetic transition at TN1 ≃ 69 K. A similar sequence of magnetic phase transitions is found for the parent compound Mn5Si3 upon temperature variation, but the field-driven transition observed in Mn5Si3 is not found in Mn3Fe2Si3, resulting in a strongly reduced magnetocaloric effect. Structurally, the hexagonal symmetry found for both compounds under ambient conditions is preserved in Mn3Fe2Si3 through both magnetic transitions, indicating that the crystal structure is only weakly affected by the magnetic phase transition, in contrast to Mn5Si3 where both transitions distort the nuclear structure. Both compounds feature a collinear high-temperature magnetic phase AF2 and transfer into a non-collinear phase AF1 at low temperature. While one of the distinct crystallographic sites remains disordered in the AF2 phase in the parent compound, the magnetic structure in the AF2 phase involves all magnetic atoms in Mn3Fe2Si3. These observations imply that the distinct sites occupied by the magnetic atoms play an important role in the magnetocaloric behaviour of the family.
21 July 2025 in International Journal of Energy and Environmental Science
Assessment of solar radiation is helpful for engineers concerning the solar energy systems and energy efficiency who can therefore take knowledge of solar radiation levels at a site. This work aims to characterize global solar radiation, meteorological variables and derived solar parameters measured in Jerusalem-Palestine, covering the period 2014-2023. Hourly global solar radiation was investigated into monthly, seasonal, and annually variations of clearness index (Kt). The frequency distribution of hourly Kt show a minimum value of 0.21 to a maximum value 0.8 throughout the entire study period. 75% and 33% of hourly (0.65 < Kt < 0.75) values are in summer and winter months, respectively, indicating partially cloudy to more clear sky conditions in Jerusalem. Moreover, Kt is a strong indicator of solar radiation at the study site. During June, daily global radiation value is 28.68 MJ/m2, while December value found to be 8.56 MJ/m2. The total number of sunshine duration hours ranged between 2755 and 3153, with the lowest recorded in December. Based on the results obtained, Jerusalem is appropriate to harvest solar energy. Further studies could be done to compare ground measurements with satellite observations to improve the spatial distribution of solar radiation in Palestine, particularly in regions where no measurements exist.
30 June 2025 in International Journal of Energy Production and Management
Organic solid waste represents 50% of the Municipal Solid Waste (MSW) composition in Palestine. MSW in the West Bank (WB) are managed by municipalities, Local Governmental Units (LGUs), and Joint Service Councils (JSCs). MSW are collected and transferred to the existing four landfills along the WB, there are no waste separation or recycling in Palestine except small projects and enterprises. The collected MSW reaches the landfills as a mixed wastes with the composition of metal, paper, glass, plastic, and organic wastes. The current organic waste treatment in Palestinian territories is represented by composting and biogas generation, the small pilot projects of composting that have been implemented facing problems related to quality, competition, and financing. Biogas production from organic solid wastes is also limited and concentrated in producing biogas from animals manure. New proposals have been discussed regarding solid waste incineration in the field of Waste To Energy (WTE) projects, except the composting and bioenergy there are no another treatment for organic MSW in the WB. This study ensures about the importance of the concept of waste separation at source, and to adapt the concept of WTE operations. Due to the high moisture content and high organic proportion in the MSW; bio-drying processes are valuable as a pretreatment stage for organic waste treatment. This study also highlights on the Refuse Derive Fuel (RDF) as a product of bio-drying processes that could help in organic MSW treatment.