Sustainable construction is a rapidly growing area of research focused on using industrial waste to replace Portland cement in concrete. This approach not only reduces CO2emissions from cement production but also serves as an effective way to diminish the environmental impact of concrete production. This study aims to investigate the properties of Coal Bottom Ash (CBA) after undergoing two different treatments: flotation and burning. It also evaluates the impact of CBA as a cement replacement in concrete with different replacement percentages (5%, 10%, 15%, and 20%). Chemical analysis of CBA has revealed that it can be classified as a pozzolanic material due to its high content of silicates, aluminates, and iron oxides. The microstructure of CBA showed a porous, angular, and irregular surface with many voids. The findings of this study revealed that the optimum mix was 10% CBA, resulting in a 2% increase in compressive strength compared to the control mix after 56 days of curing. Additionally, the study evaluated the effects of sulfate and chloride on concrete. It was found that the mix with the burning treatment showed an overall increase in strength, while the flotation treatment did not reach the control mix's strength in any of the curing periods. Furthermore, the results demonstrated that CBA has significant potential as a cement replacement material, and the burning treatment showed improvement in concrete's overall properties compared to the raw material in terms of mechanical and chemical properties while reducing greenhouse gas emissions and enhancing the environment. Doi: 10.28991/CEJ-2024-010-04-08 Full Text: PDF
6 May 2026 in International Journal of Pavement Research and Technology
This research reviews the applied various methodologies for concrete dams’ health monitoring and assessment. The main type of dams focused on this review is the embankment fill dams that serves as an important function in water supply, irrigation, and hydroelectric power. The emphasis is devoted on the integration and assessment of static and dynamic methods for dams monitoring in order to improve safety and increase the life span of dams. Static methods are usually monitor changes that are prolonged over time and are critical for the assessment of the enduring structural health. Whereas, dynamic methods are considered as real-time data crucial to address immediate changes in the environment and operation. Mathematical models and structural health monitoring techniques were surveyed that improves the encompass of hydraulic, thermal, crack, and time (HTCT) model for extreme conditions. In addition, the use of artificial intelligence (AI) was explored and particularly for internal erosion monitoring. Comparison of such analyses reveals that static monitoring is efficient in its approach to assessment over the long term, while dynamic monitoring performs better in coping with instant changes. Based on the review findings, therefore, it could be concluded that an integrated approach with the use of static and dynamic methods, supported by advanced computational models, would enhance the effectiveness of monitoring systems. The future work shall focus on the development of such integrated systems to increase the resilience of dam infrastructures, while the monitoring technologies have to be adapted continuously to the environmental challenges and the complexity of dam systems.