Ihor Hrytsai

Prof. Dr. Ihor Hrytsai

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 May 2023 in Strojnícky časopis - Journal of Mechanical Engineering
Verified
Journal Article
Open access
PDF file
IHIhor Hrytsai
Ihor Hrytsai
LULviv Politechnic National University
Lviv Politechnic National University
ASAndrii Slipchuk
Andrii Slipchuk
The results of the computer simulation of the cutting process of gears by the power skiving method are presented. Following the kinematics of the process, a method for generating 3D geometric models of undeformed sheared layers were developed, and their parameters were analyzed. The influence of tool geometry and technological parameters on cutting conditions is investigated. The simulation results and calculation of the tangential force and torque on the tool axis and their influence on the error due to angular elastic deformation of the tool are given.

1 January 2023 in Ukrainian journal of mechanical engineering and materials science
Verified
Journal Article
Closed access
PDF file
IHIhor Hrytsai
Ihor Hrytsai
DHDmytro Herus
Dmytro Herus
The results of the study of the radial-circular method of gear cutting are presented. The cutting and shaping of teeth is carried out by a thin disc cutter under conditions of continuous generating, with a combination of axial feed of the cutter and its constructive radial movement due to eccentric installation on the spindle axis. The value of the eccentricity is determined by the gear module. A graph-analytical model was used to calculate the parameters of the cuts, and the cutting force and torque on the cutter axis were modeled using these data. It was found that the cutting process is characterized by significant load variations. The areas of maximum tool wear were predicted. It is shown that for under the same initial conditions, the cutting time using this method is two times less than the time of hobbing. Since a disc cutter can cut gears in a wide range of modules, this process is one of the most versatile. This method opens up great possibilities for the restoration and repair of gears and drives manufactured to standards other than those adopted in Europe.

1 April 2026 in Dynamics
Verified
Journal Article
Open access
PDF file
IHIhor Hrytsai
Ihor Hrytsai
Petro PukachPetro Pukach
Petro Pukach
MVMyroslava Vovk
Myroslava Vovk
The results of the development and practical application of a comprehensive system for studying gear cutting processes are presented. The processes are traditional hobbing, modern power skiving, and radial-circular methods. Carrying out these processes is based on the gear teeth continuous generating method using complex kinematics. This complicates the analysis, description and modeling of the processes. The developed system provides for a logical sequence of step-by-step modeling and simulation of interrelated processes and phenomena accompanying gear processing. Reproducing volumetric chips and calculating their parameters provides the basis for determining deformation and contact processes, cutting forces, elastic deformations, machining accuracy and energy costs per operation. After establishing the operation to overcome friction and heat flows, the degree of heating and the temperature of the working surfaces are calculated to predict tool wear and its service life. Based on the parametric non-uniformity of the considered processes, the intensity of oscillations and vibrations of gear cutting machines is predicted, and their impact on the quality of gear surfaces and the accuracy of gears is determined. These approaches enable the study of such processes at the level of individual teeth and blades during cutting. They also allow gear cutting technology and cutting tools to be optimized according to the most important criteria and performance assessments.

1 January 2025 in Ukrainian journal of mechanical engineering and materials science
Verified
Journal Article
Closed access
IHIhor Hrytsai
Ihor Hrytsai
ASAndrii Slipchuk
Andrii Slipchuk
The article presents an alternative approach to the description of the cutting scheme, different from the accepted one, which corresponds to the real kinematics of the Power Skiving process. The interpretation of the process is based on the fact that the main cutting movement is the rotational movement of the tool, which, due to the intersection of the axes of the tool and the workpiece, forms the constructive movement of the face in the direction of the axial feed. In this case, the rotation of the workpiece is an auxiliary movement that does not take part in the cutting process, and the movement of the tool imparted to it by the axial feed is insignificant. The direction of the resulting movement of the cutting speed, which corresponds to such a representation, is at a slight angle concerning the face of the gear being cut. This vector determines the values of the actual or working angles on all three blades of the skiving cutter. These angles significantly change the shearing conditions during cutting, the force on the face, and the friction on the flank surfaces. This scheme has been used to analyze the cutting processes using skiving cutters with different blade designs and geometries and also to describe the negative aspects of combined “Super Skiving cutters.”

1 January 2025 in Ukrainian journal of mechanical engineering and materials science
Verified
Journal Article
Closed access
IHIhor Hrytsai
Ihor Hrytsai
BSBohdan Stoliar
Bohdan Stoliar
The article presents the results of studying the process of cutting cylindrical internal gears by the radial-circular method. The importance and relevance of the task of improving the technology of manufacturing gears and methods of modelling and optimization are substantiated. The advantages, possibilities and scope of the radial-circular method for the production of gears and transmissions are shown. To provide a basis for a comprehensive analysis of the process, a graphical-analytical method has been developed to determine the parameters of chips cut by the teeth of a disk cutter when cutting planetary gears. The regularities of changes in the cut area and chip thickness depending on the gear modulus were investigated. The results made it possible to identify the process features that will affect the cutting force, machining accuracy and tool wear.

1 January 2024 in Ukrainian journal of mechanical engineering and materials science
Verified
Journal Article
Closed access
PDF file
IHIhor Hrytsai
Ihor Hrytsai
DHDmytro Herus
Dmytro Herus
SHSerhii Hromniuk
Serhii Hromniuk
ULUkraine Spr Energo Llc
Ukraine Spr Energo Llc
The results of the simulation and study of the process of cutting gears by the traditional method of hobbing and the new radial-circular method (RCM), which is carried out by a thin disk cutter, but in the conditions of continuous profile generation, as it is in gear cutting with a hob. It has been shown that due to the peculiarities of this process, its kinematics, and the structure of the disk cutter, RCM is superior to hobbing in all the parameters studied: volumetric productivity, chip thickness ratio, and cutting forces, machining time and machining costs. The higher efficiency of the radial-circular method has thus been demonstrated and the feasibility of its practical application has been confirmed.