This study focused on the development of a new concept for ablative thermal protection material, using a relatively new polymer matrix based on polysiloxane resin, which exhibits high-performance thermal properties. As a reinforcing element, graphite felt (GF/UHT) was selected. These new ablative materials were tested and characterized to evaluate their thermal properties through comparison with established/standard ablative materials based on phenolic resin and graphite felt (GF/Isophen). To evaluate them, two distinct types of thermal tests were performed. The first consisted of subjecting the ablative materials to a temperature of 1100 °C for a total duration of 10 min (with three different dwell times: 30 s, 120 s, and 300 s). A mass loss of 31% was recorded for the GF/UHT ablative material samples compared to the GF/Isophen material, where the mass loss reached approximately 68%. The second test consisted of exposure to an oxyacetylene flame at a temperature of 1600 °C. The GF/UHT samples had an improved behavior compared to the GF/Isophen samples, the latter being completely penetrated at the end of the test. Additionally, differential scanning calorimetry (DSC) tests were performed and characterized by FTIR spectroscopy and scanning electron microscopy.
In recent years, researchers have developed a new method of measuring the pressure on the surface using sensitive paints. This is an optical technique for determining surface pressure distributions by measuring changes in the intensity, emitted by certain excited molecules. The main advantage of the method over traditional techniques is the high resolution of the information. The only limitation of the resolution of a global map generated by the PSP (pressure-sensitive paint) technique is given by the capabilities of the image capture device. This paper describes the development of a technology for obtaining pressure-sensitive paint, in laboratory conditions, as an advanced measurement technique. The method has an application in many fields such as automotive, aerospace, or even medical.