In recent decades, advances in the development of solar tracking systems (STSs) have led to concentrating solar technologies to increase their energy conversion efficiency. These systems, however, still have areas of opportunity or improving their performance and reducing their manufacturing costs. This paper presents the design, construction and evaluation of a high-precision dual-axis solar tracking system with a technology readiness level of 7–8. The system is controlled by a low-cost Arduino board in a closed-loop control using a micro-electromechanical solar sensor. Real-time tracking experiments were performed under a clear sky as well as during partly and mostly cloudy days. Solar tracking accuracy was evaluated in an operational environment using test procedures adapted from the International Electrotechnical Commission (IEC) 62817 standard. The total mean instantaneous solar tracking error on a clear day measured with a calibrated digital solar sensor was 0.37 and 0.52 with a developed pinhole projection system. Similarly, the total mean reported solar tracking accuracy achieved was 0.390 on a sunny day and 0.536 on a partially cloudy day. An annual power generation analysis considering a conventional photovoltaic (PV) panel system and a typical concentrator photovoltaic (CPV) module as payloads was also presented. Simulations showed an increase in the generation of up to 37.5% for a flat panel with dual-axis tracking versus a fixed panel. In the case of the CPV system, first, a ray tracing study was implemented to determine the misalignment coefficient, then the annual power generation was estimated. The developed STS allowed the CPV modules to reach at least 90% of their nominal energy conversion efficiency.
Accurate turbidity classification is essential for maintaining water quality in various contexts, from drinking water to industrial processes. Traditional turbidimeters face challenges, including interference from colored substances, particle shape and size variations, and the need for regular calibration and maintenance. This paper implements a convolutional neural network (CNN) to classify water samples based on their turbidity levels. The dataset consisted of images captured under controlled laboratory conditions, with turbidity levels measured using a 2100P Portable Turbidimeter. The CNN achieved a classification accuracy of 97.00% in laboratory settings. When tested on real-world water body samples, the model maintained an accuracy of 85.00%. The results demonstrate that deep learning can effectively classify turbidity levels, offering a promising solution to overcome the limitations of traditional methods. The study highlights the potential of CNNs for accurate and efficient turbidity measurement, balancing accuracy with practical applicability in field conditions.
This study presents a micro-scale hybrid wind turbine that integrates a Savonius rotor with a Helical Darrieus rotor, aiming to enhance energy conversion efficiency and adaptability for decentralized renewable energy generation. The hybrid design leverages the high torque generation of the Savonius rotor and the aerodynamic efficiency of the Helical Darrieus rotor. Computational analyses using CFD simulations and experimental validation with a 3D-printed prototype in a closed wind tunnel were conducted at speeds ranging from 3 to 8 m/s. The results demonstrate that the hybrid turbine achieves a power coefficient of 0.26 at an optimal tip-speed ratio of 2.7, marking a 180% improvement over standalone Savonius rotors. The hybridization process mitigates the low-speed inefficiencies of the Savonius rotor. It compensates for the high-speed limitations of the Darrieus rotor, resulting in a turbine capable of operating efficiently over a wider range of wind speeds. This balanced integration maximizes energy harvesting and improves adaptability to varying wind conditions, achieving balanced and synergistic performance.
29 January 2019 in International Journal of Systems Science
In this paper, we present a fractional sliding mode controller based on a robust observer for fractional systems with bounded disturbances. This controller is introduced to achieve closed-loop Mittag–Leffler stability for uncertain fractional systems; meanwhile, the robust observer is designed such that a stability is obtained via quadratic Lyapunov functions and the tuning is achieved with linear matrix inequality approach. The performance and stability of the proposed controller are analysed and demonstrated through a generalised -differentiator. Finally, to illustrate the effectiveness of the proposed approach a comparative analysis against the fractional Super-Twisting is carried out.
Wind turbines are a solution for sustainable energy, significantly reducing carbon emissions and fostering a circular economy for more cost-effective and cleaner power generation, in line with worldwide environmental aspirations. In this context, this research aims to explore a novel two-stage, twisted-blade micro-Vertical-Axis Wind Turbine (-VAWT)alternative inspired by the Savonius Rotor (SR). This investigation utilizes the SST turbulence model to explore the power coefficient () and torque coefficient (), finding values ranging from 0.02 to 0.08 across the turbine by altering the free stream velocity (V). analysis further delves into four specific sections, highlighting areas of particular interest. These results are validated by examining velocity contours, pressure contours, and streamlines in four horizontal sections, demonstrating that the proposed turbine model exhibits minimal torque fluctuation. Moreover, the analysis of vertical wind streamlines illustrates very low interference with various wind turbine proposals, underscoring the turbine’s efficiency and potential for integration into diverse wind energy projects.