Antennas should be small enough to fit in the limited space of IoT devices and, at the same time, with multi-band operation across several bands as well as ensure stability when embedded in a device. In this regard, two different technologies are compared: antenna booster and flexible printed circuit antenna. A comparison is addressed from measured results in terms of efficiency, concluding that despite the antenna booster is more than fifty times smaller in area, it provides better efficiency across the frequency range of 698–960 MHz and 1710–2690 MHz across three different printed circuit boards (PCB): a big PCB of 131 mm × 60 mm, a medium PCB of 95 mm × 42 mm, and a small PCB of 65 mm × 42 mm. Moreover, the flexible printed antenna depends on the mounting process, whereas the antenna booster does not.
GPS has become an attractive feature for geolocalization enabling asset tracking IoT devices. GPS satellite antennas radiate RHCP (right-hand circularly polarized) electromagnetic waves; thus, the typical antenna at the receiver is also RHCP. However, when the orientation of the receiving device is random, linear polarization antennas operate better in terms of TTFF (time to first fix). Through field measurements (urban and field) and considering different positions of the device in a vehicle, an RHCP microstrip patch antenna and a linear non-resonant antenna element called an antenna booster were compared. TTFF averaged for several positions was 7 s better for the linearly polarized antenna booster than for the microstrip RHCP patch antenna. The results demonstrate that the behavior of the linear polarization antenna booster technology is more robust in terms of TTFF to the arbitrary position of the IoT device while keeping a small size and simplicity.sdf