Landslide hazards on roadbed slopes pose significant safety risks, leading to casualties, property losses, and environmental damage. With the rapid expansion of global railway and highway construction, roadbed slope stability has become a critical research focus. However, systematic reviews and prospective studies based on bibliometric analysis in this field remain limited; such a lack is likely to lead to a lag in the theoretical development of the field. To address this gap, this study analyzes 453 papers from 2014 to 2023 using the Web of Science (WOS) core collection and tools like VOSviewer, CiteSpace, and Bibliometrix R. This study focuses on the following: (i) Visualizing research trends through knowledge graphs, covering document quantity, the authors, the countries, and the keywords. (ii) The objectives, the methods, specific objects, and the environmental conditions of the literature in this field are categorized and discussed, and the limitations of numerical simulation and other research shortcomings in this field are pointed out. (iii) Future research directions, focusing on the actual working conditions and utilizing advanced and flexible subroutine functions to simulate complex conditions with multi-physical field coupling, are discussed to ensure the accuracy of this research and the sustainability of road construction development. This paper can help scholars comprehensively and quickly understand the research status and hotspots in the field of roadbed slope research, with a view to providing theoretical support for future research and exploration.
Introduction: Yongxing Tunnel No.1’s complex geology near a buried oil pipeline on the Guizhou-Nanning high-speed route poses blasting risks. Prioritizing pipeline safety, efforts focus on minimizing vibration impacts.Methods: Research uses numerical simulations and field tests to analyze three delay times and three spacing charge materials for vibration reduction.Results: Optimal delay is 30 ms, yielding a 0.52 cm/s vibration velocity, 20%-29% lower than 28 ms and 32 ms. Soil is the most effective spacer, achieving 0.46 cm/s, 30.30%-22.03% lower than water and air. Field tests align with simulations.Discussion: Findings provide a reference for optimal vibration reduction and safe construction under similar conditions.
The stability of slopes containing flat caves, frequently employed in mining for transportation and drainage, is critically compromised by alternating dry and wet cycles, posing significant geohazard risks. This study investigates the deformation and damage mechanisms of such a slope at a fluorspar mine in Hunan Province, China. An integrated methodology combining indoor physical similarity simulation and Abaqus CAE finite element numerical simulation was employed. The experimental and numerical results demonstrate that: (1) slope stability deteriorates through three stages: latent, developmental, and eruptive. The highest localized strain reached 0.253% in the mid-to-lower slope area, with a maximum overall deformation of 0.838%. (2) Crack formation was most pronounced during the first two cycles, with a rapid increase in total crack length and area, after which the crack network stabilized. (3) Saturation levels gradually rose from the slope base to the middle section, reaching nearly full saturation at the base after the fourth cycle, which corresponded with concentrated displacement in the mid-lower slope. This research clarifies the phased failure mechanisms of flat-cave slopes under hydrological cycling and offers practical technical guidance for safety monitoring, early warning system development, and protective engineering design for mine slopes with similar geological settings.