Terahertz (THz) band communications are considered a crucial technology to support future applications, such as ultra-high bit rate wireless local area networks, in the next generation of wireless communication systems. In this work, we consider an ultra-massive multiple-input multiple-output (UM-MIMO) THz communication system operating in a typical indoor scenario where the direct link between the transmitter and receiver is obstructed due to surrounding obstacles. To help establish communication, we assume the aid of a nearby reconfigurable intelligent surface (RIS) whose phase shifts can be adjusted. To configure the individual phase shifts of the RIS elements, we formulate the problem as a constrained achievable rate maximization. Due to the typical large dimensions of this optimization problem, we apply the accelerated proximal gradient (APG) method, which results in a low complexity algorithm that copes with the non-convex phase shift constraint through simple element-wise normalization. Our numerical results demonstrate the effectiveness of the proposed algorithm even when considering realistic discrete phase shifts’ quantization and imperfect channel knowledge. Furthermore, comparison against existing alternatives reveals improvements between 30% and 120% in terms of range, for a reference rate of 100 Gbps when using the proposed approach with only 81 RIS elements.
Millimeter-wave and terahertz technologies have been attracting attention from the wireless research community since they can offer large underutilized bandwidths which can enable the support of ultra-high-speed connections in future wireless communication systems. While the high signal attenuation occurring at these frequencies requires the adoption of very large (or the so-called ultra-massive) antenna arrays, in order to accomplish low complexity and low power consumption, hybrid analog/digital designs must be adopted. In this paper we present a hybrid design algorithm suitable for both mmWave and THz multiuser multiple-input multiple-output (MIMO) systems, which comprises separate computation steps for the digital precoder, analog precoder and multiuser interference mitigation. The design can also incorporate different analog architectures such as phase shifters, switches and inverters, antenna selection and so on. Furthermore, it is also applicable for different structures, namely fully-connected structures, arrays of subarrays (AoSA) and dynamic arrays of subarrays (DAoSA), making it suitable for the support of ultra-massive MIMO (UM-MIMO) in severely hardware constrained THz systems. We will show that, by using the proposed approach, it is possible to achieve good trade-offs between spectral efficiency and simplified implementation, even as the number of users and data streams increases.
Industrial inspection is crucial for maintaining quality and safety in industrial processes. Deep learning models have recently demonstrated promising results in such tasks. This paper proposes YOLOX-Ray, an efficient new deep learning architecture tailored for industrial inspection. YOLOX-Ray is based on the You Only Look Once (YOLO) object detection algorithms and integrates the SimAM attention mechanism for improved feature extraction in the Feature Pyramid Network (FPN) and Path Aggregation Network (PAN). Moreover, it also employs the Alpha-IoU cost function for enhanced small-scale object detection. YOLOX-Ray’s performance was assessed in three case studies: hotspot detection, infrastructure crack detection and corrosion detection. The architecture outperforms all other configurations, achieving values of 89%, 99.6% and 87.7%, respectively. For the most challenging metric, , the achieved values were 44.7%, 66.1% and 51.8%, respectively. A comparative analysis demonstrated the importance of combining the SimAM attention mechanism with Alpha-IoU loss function for optimal performance. In conclusion, YOLOX-Ray’s ability to detect and to locate multi-scale objects in industrial environments presents new opportunities for effective, efficient and sustainable inspection processes across various industries, revolutionizing the field of industrial inspections.
In this article, we investigate in different scenarios the feasibility of using massive multiple-input–multiple-output (mMIMO) with reconfigurable intelligent surfaces (RISs) to increase the throughput and coverage with high energy efficiency, considering sub-6 GHz, mmWave, and THz bands. With that objective, a centralized radio access network (C-RAN) suitable for beyond fifth-generation (B5G) systems is considered, where we integrate the base stations (BSs) with multiple RISs and IoT devices or user equipment. RISs with a large number of quasi-passive reflecting elements constitute a low-cost approach capable of shaping radio wave propagation and improving wireless connectivity. We consider a scenario where multiple RISs are combined with mMIMO in the uplink in order to provide connectivity to a smart city (with thousands of active low-power IoT devices), wirelessly, in the 3.6 GHz and 28 GHz bands. We also address a scenario where RISs are adopted with mMIMO in the downlink so as to offer connectivity to a stadium with a pitch, (and thousands of active users’ equipment) in the 28 GHz band. Finally, we also studied the connectivity at 100 GHz of a factory in which several RIS panels, replacing most of the BSs equipped with mMIMO, assure improved throughput and coverage. We concluded that RISs are capable of improving the performance in any of these analyzed scenarios at the different frequency bands, justifying that they are a key enabling technology for 6G.
A study on the design, simulation and characterization of a reconfigurable terahertz (THz) filter, composed of two frequency-selective surfaces (FSSs) with applications on sensor devices in general and highly sensitive stress sensors, is presented in this paper. Using the developed theoretical model, we found out that by careful tuning the wire parameters, it is possible to control the filter sensitivity and also the energy transmission and reflection that passes through the structure. Numerical modelling of both the mechanical and electromagnetic components (using the elasticity equation and Maxwell’s equations, respectively) has been undertaken for two types of the device assemblies based on different thermoplastic polymers transparent to the THz radiation, namely: high-density polyethylene (HDPE) and polytetrafluoroethylene (PTFE), operating in a THz window from 395 to 455 GHz. The numerical results allowed us to characterize the relation between the reflectance/transmittance and the amount of force required to obtain a specific frequency shift along that window. It was found that the device assembled with HDPE presents a more linear response and it is able to pass from a full transparency to almost full opacity using only its linear operating zone. Due to its characteristics, this THz filter might be an interesting solution not only for THz sensors based on reconfigurable filters but also for optical modulators for the THz domain.