There is a growing need for precise and rapid detection methods in fields such as biomedical diagnostics, environmental monitoring, and chemical analysis. Surface plasmon resonance (SPR) sensors have been used for the detection and quantification of a wide range of analytes, including biomolecules, chemicals, and gases, in real-time. Despite the promising capabilities of SPR sensors, there remains a gap in creating a balance between having a large enough area to capture a significant number of analytes for detection and being small enough to ensure high sensitivity. This research aims to explore the design of a D-shaped SPR-based optical fiber sensor, focusing on the use of copper, gold, and silver thin films at optimized width and thickness of 10 µm and 45 nm, respectively, to improve the sensor’s performance. Employing a computational approach, this study examines the influence of the optimized width and refractive indices of metallic films on the sensor’s characteristics. The 10 µm width of the metallic thin film has been found to produce an optimal balance between the sensitivity and the dynamic range of the sensor. Leveraging on the ratio of the real and imaginary parts of the dielectric constant of the thin film metal provides insight into the optical properties and sensitivity at certain wavelengths. Within an analyte refractive index range of 1.37–1.42 and a wavelength range of 650–1200 nm, results indicate that silver outperforms gold and copper at the optimized width with a wavelength sensitivity, and detection accuracy of 12,300 nmRIU−1, and 3.075, respectively. By optimizing the width of the metal thin film at 10 µm, a highly sensitive D-SPR is designed, allowing for enhanced sensor detection capabilities for a wide range of bioanalytes.
Surface plasmon resonance (SPR)-based optical fibre sensors have transformed label-free biosensing; however, single-interface evanescent field interactions continue to limit their sensitivity. This study presents a novel π-configuration optical fibre-based surface plasmon resonance sensor that greatly increases sensitivity by enabling dual plasmonic excitation on two symmetrically polished surfaces coated with optimized metallic thin films (Ag, Au, or Cu). We show, using finite element method simulations in COMSOL Multiphysics v6.3, that the π-configuration increases the interaction volume between the analyte and guided light, resulting in an enhanced sensitivity of 3300 nm/RIU for silver at refractive index (RI) 1.37–1.38, which is a 120% improvement over traditional D-shaped sensors (1500 nm/RIU). The maximum field norm for the π-configuration sensor is approximately 1.4 times greater than the maximum observed for the D-shaped SPR sensor at an analyte RI of 1.38. The sensor’s performance is evaluated using full-width half-maximum, wavelength sensitivity, and wavelength interrogation metrics. For the π-configuration sensor at an analyte RI of 1.38, the values of the FWHM, figure of merit, detection accuracy, and confinement loss were 36 nm, 94.29 RIU−1, 0.94, and 38.5 dB/cm, respectively. The results obtained are purely simulated using COMSOL. With the support of electric field confinement analysis, a thorough theoretical framework describes the crucial coupling regime that causes ultra-high sensitivity at low RI. This design provides new opportunities for environmental monitoring, low-abundance biomarker screening, and early-stage virus detection, where it is necessary to resolve minute RI changes with high precision.
Although optical fiber-based surface plasmon resonance (SPR) sensors have revolutionized real-time, label-free biosensing, conventional designs suffer from limited multi-analyte detection capabilities. This study utilizes the novel Pi (π)-configured dual SPR optical fiber sensor with two opposing side-polished surfaces, enabling plasmonic excitation for simultaneous multi-analyte detection. The proposed sensor leverages asymmetric metallic thin films such as Ag, Au, Cu, and hybrid configurations (metal + TiO2) to generate two distinct resonance peaks, significantly enhancing detection versatility. Numerical simulations using the finite element method in COMSOL Multiphysics v6.3 demonstrate that the π-configuration achieves dual resonance dips at 982 nm and 1276 nm for Ag and Ag–TiO2 films, 1040 nm and 1317 nm for Au and Au–TiO2 films, and 977 nm and 1249 nm for Cu and Cu–TiO2 films, respectively, for an analyte refractive index of 1.42. A peak spectral separation >125 nm was achieved for all the sensors for a refractive index range of 1.37–1.42, ensuring that the two dips are resolvable since the change in SPR wavelength is greater than or equal to the full width at half maximum, preserving dual-analyte capability and minimizing potential crosstalk. The results indicate that the π-configured dual SPR sensor utilizing silver and silver–TiO2 sensing layers had the highest wavelength sensitivity of 12,600 nmRIU−1 and 20,000 nmRIU−1, respectively, slightly outperforming its gold and copper counterpart. The optimized metallic and hybrid nanostructured films ensure dual distinct peaks with high sensitivity, while maximizing refractive index resolution. This work presents the design of a π-configured SPR-based optical fiber sensor utilizing dielectric and multi-metallic thin films, thereby offering a breakthrough in multiplexed biosensing for applications in medical diagnostics, environmental monitoring, and chemical detection.
Although optical fibre-based surface plasmon resonance (SPR) sensors have revolutionized real-time, label-free biosensing, conventional designs suffer from limited multi-analyte detection capabilities. This study utilizes the novel Pi (π)-configured dual-SPR optical fibre sensor with two opposing side-polished surfaces, enabling plasmonic excitation for simultaneous multi-analyte detection. The proposed sensor leverages asymmetric metallic thin films such as Ag, Au, Cu and hybrid configurations (metal + TiO₂) to generate two distinct resonance peaks, significantly enhancing detection versatility. Numerical simulations using finite element method in COMSOL Multiphysics v6.3 demonstrate that the π-configuration achieves dual resonance dips at 982 nm and 1276 nm for Ag and Ag-TiO₂ films, 1040 nm and 1317 nm for Au and Au-TiO₂ films, and 977 nm and 1249 nm for Cu and Cu-TiO₂ films respectively for an analyte refractive index of 1.42. A peak spec-tral separation >125 nm was achieved for all the sensors for a refractive index range of 1.37 – 1.42, ensuring that the two dips are resolvable since the change in SPR wavelength is greater than or equal to the full width at half maximum, preserving dual-analyte capability and minimizing potential crosstalk. Results indicate that the π-configured dual-SPR sensor utilizing silver and silver-TiO2 sensing layers had the highest wavelength sensitivity of 12,600 nmRIU-1 and 20,000 nmRIU-1 respectively, slightly outperforming its gold and cop-per counterpart. The optimized metallic and hybrid nanostructured films ensures dual distinct peaks with high sensitivity, while maximizing refractive index resolution. This work presents the design of a π-configured SPR-based optical fibre sensor utilizing dielectric and multi-metallic thin films, thereby offering a breakthrough in multiplexed biosensing for applications in medical diagnostics, environmental monitoring, and chemical detection.
About Me
I work mainly on the design of optical sensors for early detection of biomolecules.
I work mainly on the design of optical sensors for early detection of biomolecules.