Framing the Circular Bioeconomy, the use of reactive compatibilizers was applied in order to increase the interfacial adhesion and, hence, the physical properties and applications of green composites based on biopolymers and food waste derived lignocellulosic fillers. In this study, poly(butylene succinate) grafted with maleic anhydride (PBS-g-MAH) was successfully synthetized by a reactive melt-mixing process using poly(butylene succinate) (PBS) and maleic anhydride (MAH) that was induced with dicumyl peroxide (DCP) as a radical initiator and based on the formation of macroradicals derived from the hydrogen abstraction of the biopolymer backbone. Then, PBS-g-MAH was used as reactive compatibilizer for PBS filled with different contents of pistachio shell flour (PSF) during melt extrusion. As confirmed by Fourier transform infrared (FTIR), PBS-g-MAH acted as a bridge between the two composite phases since it was readily soluble in PBS and could successfully form new esters by reaction of its multiple MAH groups with the hydroxyl (–OH) groups present in cellulose or lignin of PSF and the end ones in PBS. The resultant compatibilized green composites were, thereafter, shaped by injection molding into 4-mm thick pieces with a wood-like color. Results showed significant increases in the mechanical and thermomechanical rigidity and hardness, meanwhile variations on the thermal stability were negligible. The enhancement observed was related to the good dispersion and the improved filler-matrix interfacial interactions achieved by PBS-g-MAH and also to the PSF nucleating effect that increased the PBS’s crystallinity. Furthermore, water uptake of the pieces progressively increased as a function of the filler content, whereas the disintegration in controlled compost soil was limited due to their large thickness.
The catalytic performance of copper in Fenton-like processes was investigated under conditions of elevated chloride concentrations. Model solutions were prepared containing four target pollutants (50 mg/L each), Cu (II) at 50 mg/L, and a stoichiometric dose of hydrogen peroxide sufficient for complete oxidation of the organic matter. Chloride levels ranged from low concentrations to those representative of both synthetic and natural seawater (36 g/L NaCl). An increase in chloride concentration consistently led to greater pollutant removal efficiency. The influence of pH on process performance was also assessed in saline and real seawater matrices. An optimal pH range between 6 and 7 was identified in both cases, where the reactivity of copper–chloride complexes was maximized while the formation of insoluble, catalytically inactive copper species was suppressed. Monitoring of pH, soluble copper concentration, and hydrogen peroxide consumption supported the conclusion that real seawater provides the most favorable conditions for copper–chloride catalyzed Fenton-like reactions. These results demonstrate the high potential of copper-based advanced oxidation processes in saline environments, particularly in applications where traditional methods exhibit limited efficiency.
17 March 2026 in Journal of Environmental Chemical Engineering