José Domenzain-Gonzalez

Dr. José Domenzain-Gonzalez

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2021 in Journal of Environmental Chemical Engineering
Verified
Journal Article
Closed access
JDJosé Domenzain-Gonzalez
José Domenzain-Gonzalez
JCJosé J. Castro-Arellano
José J. Castro-Arellano
LGLuis A. Galicia-Luna
Luis A. Galicia-Luna
MRMartin Rodriguez-Cruz
Martin Rodriguez-Cruz
RHRoberto T. Hernandez-Lopez
Roberto T. Hernandez-Lopez
LLLuis Lartundo-Rojas
Luis Lartundo-Rojas

21 November 2019 in International Journal of Photoenergy
Verified
Journal Article
Open access
PDF file
JDJosé Domenzain-Gonzalez
José Domenzain-Gonzalez
JCJosé Javier Castro-Arellano
José Javier Castro-Arellano
LGLuis A. Galicia-Luna
Luis A. Galicia-Luna
LLLuis Lartundo-Rojas
Luis Lartundo-Rojas
A Mexican natural zeolite (MNZ) was impregnated with Fe at concentrations of 5 and 10 mg FeCl3/g MNZ (MNZ/Fe) in order to study the photo-Fenton degradation of Reactive Black 5 (RB5) dye. Two samples were prepared and calcined at 550 and 700°C for each concentration. These samples were also characterized by the following techniques: X-ray diffraction (XRD) to determine crystalline phases of mineral, X-ray photoelectron spectroscopy (XPS) to observe the elemental composition of the material where the main element was Fe as Fe2p, Mössbauer to establish the phases in the material which were magnetite (Fe3O4), fayalite, and chlorite, Raman to corroborate that magnetite clusters in natural material were presented, and transmission electron microscopy (TEM) by which magnetite nanoparticles were observe on zeolite surface. Afterwards, the catalytic degradation of RB5 dye was performed by photo-Fenton process using a 2.2 W lamp as a radiation source. Four initial concentrations of RB5 dye ((RB5)0) were evaluated which ranged from 40 to 100 mg/L. Then, the evaluation reaction was carried out by UV-Vis spectroscopy to know the change in RB5 concentration and chemical oxygen demand (COD) removal to determine the organic carbon. The best results on the photo-Fenton degradation was 91% discoloration and 68.5% chemical oxygen demand removal based on an initial concentrationRB50=100 mg/L and 10 mg MNZ/Fe (700°C of calcined temperature) atMNZ/Fe=0.05 g/L catalyst dose in aqueous solution,H2O2=3 g/L,pH=2.5, and 180 minutes of reaction time. Subsequently, variations on (RB5)0, pH, (H2O2), and (MNZ/Fe) were assessed in order to optimize the process by keeping 10 MNZ/Fe. The optimal RB5 dye degradation was achieved atRB50=100 mg/L in the presence ofMNZ/Fe=0.2 g/L,H2O2=3 g/L andpH=2.5where the highest discoloration and chemical oxygen demand removal were 93 and 70.5 at 180 min. Finally, the kinetic reaction was evaluated as a pseudo-first-order kinetics with an apparent rate constant (kapp) of 0.0225 min-1at latest conditions.

31 March 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
GSGabriela Sanchez-Rodriguez
Gabriela Sanchez-Rodriguez
JDJosé Domenzain-Gonzalez
José Domenzain-Gonzalez
FSFrancisco Javier Verónico Sánchez
Francisco Javier Verónico Sánchez
Hugo Isidro PérezHugo Isidro Pérez
Hugo Isidro Pérez
AZAbel Zúñiga-Moreno
Abel Zúñiga-Moreno
OEOctavio Elizalde-Solis
Octavio Elizalde-Solis
The objective of this work was to study the volumetric and transport properties of mixtures made up of biodiesel and diesel, in order to meet the desirable properties of these formulations for their practical applications. The volumetric and transport properties were analyzed for two pseudobinary mixtures constituted of diesel + beef tallow butyl ester biodiesel and diesel + waste cooking oil methyl ester biodiesel in the whole range of composition at 0.078 MPa. The study of butyl ester biodiesel was motivated by the scarcity of these properties’ data for butyl esters and the improvement of some of its physicochemical properties. The biofuels were previously transesterified from waste materials and alcohols, beef tallow with 1-butanol and cooking oil with methanol. Density measurements were performed in a vibrating tube densimeter from 293.15 to 363.15 K; the kinematic viscosity experiments were carried out in Cannon-Fenske viscometers from 293.15 to 343.15 K. The derived thermophysical properties evaluated were the excess molar volume, the partial molar volume, the thermal expansion coefficient, the dynamic viscosity and the viscosity deviation. The excess molar volumes presented positive and negative values. The Redlich–Kister correlation and the theoretical ERAS (Extended Real Association Solution) model were applied for modelling the excess molar volume. Both approaches resulted in good agreement. For viscosity, the McAllister model was implemented and yielded lower deviations for the butyl ester biodiesel.

19 January 2024 in The Journal of Chemical Thermodynamics
Verified
Journal Article
Closed access
RMRicardo García Morales
Ricardo García Morales
FSFrancisco Javier Verónico Sánchez
Francisco Javier Verónico Sánchez
JDJosé Domenzain-Gonzalez
José Domenzain-Gonzalez
AZAbel Zúñiga-Moreno
Abel Zúñiga-Moreno
CBChristian Bouchot
Christian Bouchot
OEOctavio Elizalde-Solis
Octavio Elizalde-Solis