Solar energy and biomass offer sustainable alternatives to meet the energy demand and reduce the environmental impact of fossil fuels. In this study, through mass and energy balances, a comparative analysis of energy, exergy, and environmental impact (LCA) was conducted on two renewable thermal sources: solar energy and coconut shell biomass, both coupled to a supercritical CO2 Brayton cycle (sCO2) with an organic Rankine cycle (ORC) for waste heat recovery. The sCO2–ORC–biomass configuration showed higher exergy efficiency (41.1%) and lower exergy destruction (188.88 kW) compared to the sCO2–ORC–solar system (23.76% and 422.63 kW). Thermal efficiency (50.6%) and net power output (131.73 kW) were similar for both sources. However, the solar system (204,055.57 kg CO2-equi) had an 85.6% higher environmental impact than the biomass system (109,933.63 kg CO2-equi). Additionally, the construction phase contributed ~95% of emissions in both systems, followed by decommissioning (~4.5%) and operation (~0.1%). Finally, systems built with aluminum generate a higher carbon footprint than those with copper, with differences of 2% and 3.2% in sCO2–ORC–solar and sCO2–ORC–biomass, respectively. This study and an economic analysis make these systems viable thermo-sustainable options for clean energy generation.
Renewable energy sources, such as solar and biomass, represent sustainable alternatives to meet the growing energy demands of the residential sector. This study evaluated the energy, exergy, and environmental performance of two Brayton configurations using supercritical carbon dioxide: a recompression cycle (SRC) and a recompression cycle with intercooling in the main compression (SMC), both coupled to a dual-loop organic Rankine cycle (DORC) and powered by a hybrid solar-biomass thermal system. Mass, energy, and exergy balances were developed, and a life cycle assessment was performed to quantify the environmental impact. The systems were designed to cover a cooling load of 130 kW corresponding to 200 dwellings constructed with Asbestos cement in the Colombian Caribbean region. The results show that both configurations meet the required demand; the SMC-DORC cycle operates at 650 °C, while the SRC-DORC requires 750 °C. The SRC-DORC exhibits higher thermal efficiency (53.24%), while the SMC-DORC achieves a slightly higher exergy efficiency (28.15%). Environmental analysis shows that the construction phase accounts for the majority of the total impact, exceeding 95% of emissions. Overall, both configurations are technically feasible, with the SRC-DORC standing out for its balance between efficiency and environmental impact.