The QUIJOTE (Q-U-I JOint Tenerife) CMB Experiment will operate at the Teide Observatory with the aim of characterizing the polarisation of the CMB and other processes of Galactic and extragalactic emission in the frequency range of 10-40GHz and at large and medium angular scales. The first of the two QUIJOTE telescopes and the first multi-frequency (10-30GHz) instrument are already built and have been tested in the laboratory. QUIJOTE-CMB will be a valuable complement at low frequencies for the Planck mission, and will have the required sensitivity to detect a primordial gravitational-wave component if the tensor-to-scalar ratio is larger than r = 0.05.
30 August 2010 in IEEE Microwave and Wireless Components Letters
A 64% instantaneous bandwidth scalable turnstile-based orthomode transducer to be used in the so-called extended C-band satellite link is presented. The proposed structure overcomes the current practical bandwidth limitations by adding a single-step widening at the junction of the four output rectangular waveguides. This judicious modification, together with the use of reduced-height waveguides and E-plane bends and power combiners, enables to approach the theoretical structure bandwidth limit with a simple, scalable and compact design. The presented orthomode transducer architecture exhibits a return loss better than 25 dB, an isolation between rectangular ports better than 50 dB and a transmission loss less than 0.04 dB in the 3.6-7 GHz range, which represents state-of-the-art achievement in terms of bandwidth.
5 August 2010 in IEEE Transactions on Microwave Theory and Techniques
A 20-dB chip attenuator designed for cryogenic noise measurements from dc up to 40 GHz is presented. The chip is based on the use of temperature-stable tantalum-nitride thin-film resistors, a high thermal conductivity substrate such as crystal quartz (z-cut), and a suitable design that avoids inner conductor thermal heating, which is an important limiting factor for the precision of cryogenic noise measurements. A high-accuracy temperature sensor installed inside the attenuator module provides precise temperature characterization close to the chip location. The high thermal conductivity of the chip substrate in the designed attenuator assures a negligible temperature gradient between the resistive elements in the chip and the sensor, thus improving the measurement accuracy. The attenuator also shows an excellent electrical performance with insertion losses of 19.9 dB ± 0.65 dB and return losses better than 20.6 dB in the whole frequency range at 296 K. The insertion loss change when cooled to 15 K is less than 0.25 dB, which demonstrates its temperature stability.
A 45% bandwidth in-line air-filled waveguide-to-substrate integrated waveguide (SIW) direct transition is designed to greatly improve the performance of existing configurations. The transition, based on a four-section height-stepped waveguide, includes a single-step widening transformer that enables full-band operation without using any dielectric probe. The absence of the probe reduces significantly the insertion loss and makes this transition simple, bandwidth controllable and easily scalable to the millimeter-wave frequency range. A back-to-back transition is designed to cover the 32-50 GHz band showing a return loss of 15 dB and a mean insertion loss of 0.68 dB in the whole bandwidth.
12 February 2010 in International Journal of RF and Microwave Computer-Aided Engineering