Juan Manuel Tabares Martinez

Prof. Juan Manuel Tabares Martinez

TecNM- Instituto Tecnológico, Celaya, Guanajuato, Mexico
orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 February 2025 in Technologies
Verified
Journal Article
Open access
PDF file
Juan Manuel Tabares MartinezJuan Manuel Tabares Martinez
Juan Manuel Tabares Martinez
AGAdriana Guzmán-López
Adriana Guzmán-López
MBMicael Gerardo Bravo-Sánchez
Micael Gerardo Bravo-Sánchez
Alejandro Israel Barranco GutiérrezAlejandro Israel Barranco Gutiérrez
Alejandro Israel Barranco Gutiérrez
Juan Jose Martinez NolascoJuan Jose Martinez Nolasco
Juan Jose Martinez Nolasco
FVFrancisco Villaseñor-Ortega
Francisco Villaseñor-Ortega
The growing demand for innovative solutions to accurately measure variables in dewatering processes has driven the development of advanced technologies. This study focuses on the evaluation of a measurement system in a rotary dryer used to dehydrate carrots at an operating temperature of 70 °C. The system uses the Arduino platform, strain gauges, and LM35 temperature sensors. Experimental tests were designed to evaluate the performance of the dryer, using initial quantities of carrots of 1.5 kg, 1.0 kg, and 0.5 kg. The novelty of this study lies in the application of fuzzy logic for signal conditioning in real time, in order to improve the precision of measurements, designed in MATLAB (version 9.5) and programmed in Arduino. The dryer reduces the water content of the product to a final average of 10%. The research offers a novel solution for the integration of an intelligent measurement system that optimizes dewatering efficiency. The manuscript is organized as follows: in the methodology section, the design of the measurement system is described; subsequently, the experimental results and the analysis of the dryer efficiency are presented, and finally, in the conclusions, the implications of the system and its possible applications in other processes are discussed.

21 September 2025 in Technologies
Verified
Journal Article
Open access
PDF file
Juan Manuel Tabares MartinezJuan Manuel Tabares Martinez
Juan Manuel Tabares Martinez
AGAdriana Guzmán-López
Adriana Guzmán-López
MBMicael Gerardo Bravo-Sánchez
Micael Gerardo Bravo-Sánchez
SASalvador Martin Aceves
Salvador Martin Aceves
Yaquelin Verenice Pantoja PachecoYaquelin Verenice Pantoja Pacheco
Yaquelin Verenice Pantoja Pacheco
JAJuan Aguilera-Alvarez
Juan Aguilera-Alvarez
Precise control and monitoring systems are essential for efficient energy consumption in food dehydration. This study develops an applied cyber-physical control system to optimize food dehydration in rotary dryers, integrating fuzzy control algorithms through data acquisition. The system architecture utilizes DHT22 transducers for temperature monitoring, a DHT11 for humidity measurement, an IP65 anemometer for dryer wind speed detection, and a load cell weight tracking system, all connected to an Arduino Mega 2560 R3 microcontroller implementing the integrated fuzzy logic library. Experimental evaluations were performed with different carrot loads (1.5, 2.5, and 3.5 kg), demonstrating optimal performance at the initial load of 3.5 kg with an energy consumption of 11,589 kJ for 9.33 h, achieving a final moisture reduction of 10%. The 1.5 kg sample showed optimal dehydration kinetics at an average dryer hot air velocity of 1.5 m/s, while maximum efficiency (86%) was achieved with the 3.5 kg load, compared to 30% and 17% for the smaller batches. These results validate the integration of cyber-physical systems to optimize the dehydration rate (0.301 kg/h), thereby ensuring product quality in agro-industrial drying applications.

30 April 2026 in AI
Verified
Journal Article
Open access
PDF file
Juan Manuel Tabares MartinezJuan Manuel Tabares Martinez
Juan Manuel Tabares Martinez
AGAdriana Guzmán-López
Adriana Guzmán-López
MBMicael Gerardo Bravo-Sánchez
Micael Gerardo Bravo-Sánchez
FVFrancisco Villaseñor-Ortega
Francisco Villaseñor-Ortega
Juan Jose Martinez NolascoJuan Jose Martinez Nolasco
Juan Jose Martinez Nolasco
Alejandro Israel Barranco GutiérrezAlejandro Israel Barranco Gutiérrez
Alejandro Israel Barranco Gutiérrez
This study aims to develop and experimentally evaluate an artificial neural network-based temperature control strategy for hot-air carrot drying within an IoT-enabled cyber-physical system. The experimental setup employs an Arduino Mega 2560 equipped with AM2302 (air temperature sensor), MLX90614 (infrared surface temperature sensor), and SHT35 (relative humidity sensor), an HX711 load cell, and a WS68 anemometer, with cloud communication provided by an ESP8266 module for remote monitoring via Wi-Fi. The neural controller, implemented using the Arduino Neurona library, regulates the dryer temperature in real time, enabling drying kinetics analysis under ANN-based thermal control to investigate its capability to maintain thermal stability. Three initial loads (2, 4, and 6 kg) were analyzed to determine the thermal efficiency. In the dehydration experiments, the 2 kg load reached a final moisture content of 10% in 4.4 h, consuming 1390 kJ with a thermal efficiency of 83%. The 4 kg load exhibited the best time–energy balance (6.6 h, 1850.0 kJ, 88%), while the 6 kg load achieved the highest efficiency (8.1 h, 2250.0 kJ, 91%). These results demonstrate the effectiveness of neural-network-based control implemented on low-cost microcontrollers to enhance thermal efficiency in food dehydration processes.

3 January 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Juan Manuel Tabares MartinezJuan Manuel Tabares Martinez
Juan Manuel Tabares Martinez
AGAdriana Guzmán-López
Adriana Guzmán-López
MBMicael Gerardo Bravo-Sánchez
Micael Gerardo Bravo-Sánchez
Alejandro Israel Barranco GutiérrezAlejandro Israel Barranco Gutiérrez
Alejandro Israel Barranco Gutiérrez
Juan Jose Martinez NolascoJuan Jose Martinez Nolasco
Juan Jose Martinez Nolasco
FVFrancisco Villaseñor-Ortega
Francisco Villaseñor-Ortega
The growing need for innovative solutions for the precise measurement of variables in dehydration processes has driven the development of advanced measurement technologies and instrumentation techniques. This study focuses on the evaluation of a measurement system in a rotary dryer used to dehydrate carrots with an initial water content of 85% at an operating temperature of 70°C. The system employs the Arduino platform, strain gauges, and LM35 temperature sensors as primary sensors, known for their high sensitivity. Experimental tests were designed to evaluate the performance of the dryer, using initial carrot quantities of 1.5 kg, 1.0 kg, and 0.5 kg. The key innovation lies in the integration of a signal conditioning system applying fuzzy logic, designed in MATLAB and programmed into Arduino. The dryer reduces the water content of the product to a final average of 10%. The highest efficiency in dehydration rate was observed in the experiment with a 0.5 kg carrot load. The best utilization of transferred heat in the dryer was recorded when dehydrating 1.5 kg of carrots. The results demonstrate the feasibility of the proposed sensing system and highlight its potential application in various fields requiring high precision dehydration parameter measurements.

22 July 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Juan Manuel Tabares MartinezJuan Manuel Tabares Martinez
Juan Manuel Tabares Martinez
AGAdriana Guzmán-López
Adriana Guzmán-López
MBMicael Gerardo Bravo-Sánchez
Micael Gerardo Bravo-Sánchez
SASalvador Martin Aceves
Salvador Martin Aceves
Yaquelin Verenice Pantoja PachecoYaquelin Verenice Pantoja Pacheco
Yaquelin Verenice Pantoja Pacheco
JAJuan Aguilera-Alvarez
Juan Aguilera-Alvarez
Precise control and monitoring systems are essential for efficient energy consumption in food dehydration. This study develops an applied cyber-physical control system to optimize food dehydration in rotary dryers, integrating fuzzy control algorithms through data acquisition. The system architecture utilizes DHT22 transducers for temperature monitoring, a DHT11 for humidity measurement, an IP65 anemometer for dryer wind speed detection, and a load cell weight tracking system, all connected to an Arduino Mega 2560 R3 microcontroller implementing the integrated fuzzy logic library. Experimental evaluations were performed with different carrot loads (1.5, 2.5, and 3.5 kg), demonstrating optimal performance at the initial load of 3.5 kg with an energy consumption of 11,589 kJ for 9.33 hours, achieving a final moisture reduction of 10%. The 1.5 kg sample showed optimal dehydration kinetics at an average dryer hot air velocity of 1.5 m/s, while maximum efficiency (86%) was achieved with the 3.5 kg load, compared to 30% and 17% for the smaller batches. These results validate the integration of cyber-physical systems to optimize the dehydration rate (0.301 kg/h), thereby ensuring product quality in agro-industrial drying applications.

27 February 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
Juan Manuel Tabares MartinezJuan Manuel Tabares Martinez
Juan Manuel Tabares Martinez
AGAdriana Guzmán-López
Adriana Guzmán-López
MBMicael Gerardo Bravo-Sánchez
Micael Gerardo Bravo-Sánchez
FVFrancisco Villaseñor-Ortega
Francisco Villaseñor-Ortega
Juan Jose Martinez NolascoJuan Jose Martinez Nolasco
Juan Jose Martinez Nolasco
Alejandro Israel Barranco GutiérrezAlejandro Israel Barranco Gutiérrez
Alejandro Israel Barranco Gutiérrez
A control algorithm based on artificial neural networks was developed to regulate the hot-air drying temperature for carrot dehydration within an IoT-enabled cyber-physical system. The experimental setup employs an Arduino Mega 2560 equipped with AM2302, MLX90614, and SHT35 sensors, an HX711 load cell, and a WS68 anemometer, with cloud communication provided by an ESP8266 module for remote monitoring via Wi-Fi under an IoT framework. The neural controller, implemented using the Arduino Neurona li-brary, adjusts the dryer temperature in real time, ensuring thermal stability throughout operation. Three initial loads (2, 4, and 6 kg) were analyzed to obtain the drying kinetics and determine the thermal efficiency. In the dehydration experiments, the 2 kg load reached a final moisture content of 10% in 4.4 h, consuming 1,390 kJ with a thermal effi-ciency of 83%. The 4 kg load exhibited the best time–energy balance (6.6 h, 1,850.0 kJ, 88%), while the 6 kg load achieved the highest efficiency (8.1 h, 2,250.0 kJ, 91%). These results demonstrate the effectiveness of neural-network-based control implemented on low-cost microcontrollers to enhance thermal efficiency in food dehydration processes.