We investigated functionalized graphene materials to create highly sensitive sensors for volatile organic compounds (VOCs) such as formaldehyde, methanol, ethanol, acetone, and isopropanol. First, we prepared VOC-sensitive films consisting of mechanically exfoliated graphene (eG) and chemical graphene oxide (GO), which have different concentrations of structural defects. We deposited the films on silver interdigitated electrodes on Kapton substrate and submitted them to thermal treatment. Next, we measured the sensitive properties of the resulting sensors towards specific VOCs by impedance spectroscopy. We obtained the eG- and GO-based electronic nose composed of two eG films- and four GO film-based sensors with variable sensitivity to individual VOCs. The smallest relative change in impedance was 5% for the sensor based on eG film annealed at 180 °C toward 10 ppm formaldehyde, whereas the highest relative change was 257% for the sensor based on two-layers deposited GO film annealed at 200 °C toward 80 ppm ethanol. At 10 ppm VOC, the GO film-based sensors were sensitive enough to distinguish between individual VOCs, which implied excellent selectivity, as confirmed by Principle Component Analysis (PCA). According to a PCA-Support Vector Machine-based signal processing method, the electronic nose provided identification accuracy of 100% for individual VOCs. The proposed electronic nose can be used to detect multiple VOCs selectively because each sensor is sensitive to VOCs and has significant cross-selectivity to others.

Electronic tongues and artificial gustation for crucial analytes in the environment, such as metal ions, are becoming increasingly important. In this contribution, we propose a multi-level fusion framework for a hybrid impedimetric and voltammetric electronic tongue to enhance the accuracy of K⁺, Mg²⁺, and Ca²⁺ detection in an extensive concentration range (100.0 nM–1.0 mM). The proposed framework extracts electrochemical-based features and separately fuses, in the first step, impedimetric features, which are characteristic points and fixed frequency features, and the voltammetric features, which are current and potential features, for data reduction by LDA and classification by kNN. Then, in a second step, a decision fusion is carried out to combine the results for both measurement methods based on Dempster–Shafer (DS) evidence theory. The classification results reach an accuracy of 80.98% and 81.48% for voltammetric measurements and impedimetric measurements, respectively. The decision fusion based on DS evidence theory improves the total recognition accuracy to 91.60%, thus realizing significantly high accuracy in comparison to the state-of-the-art. In comparison, the feature fusion for both voltammetric and impedimetric features in one step reaches an accuracy of only 89.13%. The proposed hierarchical framework considers for the first time the fusion of impedimetric and voltammetric data and features from multiple electrochemical sensor arrays. The developed approach can be implemented for several further applications of pattern fusion, e.g., for electronic noses, measurement of environmental contaminants such as heavy metal ions, pesticides, explosives, and measurement of biomarkers, such as for the detection of cancers and diabetes.