We investigated the influence of low-concentration indium (In) doping on the chemical and structural properties of solution-processed zinc oxide (ZnO) films and the electrical characteristics of bottom-gate/top-contact In-doped ZnO thin-film transistors (TFTs). The thermogravimetry and differential scanning calorimetry analysis results showed that thermal annealing at 400 °C for 40 min produces In-doped ZnO films. As the In content of ZnO films was increased from 1% to 9%, the metal-oxygen bonding increased from 5.56% to 71.33%, while the metal-hydroxyl bonding decreased from 72.03% to 9.63%. The X-ray diffraction peaks and field-emission scanning microscope images of the ZnO films with different In concentrations revealed a better crystalline quality and reduced grain size of the solution-processed ZnO thin films. The thickness of the In-doped ZnO films also increased when the In content was increased up to 5%; however, the thickness decreased on further increasing the In content. The field-effect mobility and on/off current ratio of In-doped ZnO TFTs were notably affected by any change in the In concentration. Considering the overall TFT performance, the optimal In doping concentration in the solution-processed ZnO semiconductor was determined to be 5% in this study. These results suggest that low-concentration In incorporation is crucial for modulating the morphological characteristics of solution-processed ZnO thin films and the TFT performance.
This paper presents a failure prediction model using iterative feature selection, which aims to accurately predict the failure occurrences in industrial Internet of Things (IIoT) environments. In general, vast amounts of data are collected from various sensors in an IIoT environment, and they are analyzed to prevent failures by predicting their occurrence. However, the collected data may include data irrelevant to failures and thereby decrease the prediction accuracy. To address this problem, we propose a failure prediction model using iterative feature selection. To build the model, the relevancy between each feature (i.e., each sensor) and the failure was analyzed using the random forest algorithm, to obtain the importance of the features. Then, feature selection and model building were conducted iteratively. In each iteration, a new feature was selected considering the importance and added to the selected feature set. The failure prediction model was built for each iteration via the support vector machine (SVM). Finally, the failure prediction model having the highest prediction accuracy was selected. The experimental implementation was conducted using open-source R. The results showed that the proposed failure prediction model achieved high prediction accuracy.
This paper presents a dominant channel occupancy (DCO) mechanism for the Wi-Fi backscatter uplink in the industrial Internet of things (IIoT). The DCO provides high-priority channel access and reliable burst transmission to the Wi-Fi backscatter devices, thereby enabling the Wi-Fi backscatter tag to deliver its tag information to the Wi-Fi reader without interference from neighboring legacy Wi-Fi devices to guarantee the timeliness and reliability of the IIoT system. For the former, we consider three types of medium access control (MAC) configurations: “carrier sense multiple access with collision avoidance (CSMA/CA) starting with short inter-frame space (SIFS)”, “freezing of the backoff period”, and “reduced CWmin.” In addition, the DCO uses the SIFS between burst packets to guarantee reliable burst transmission. To verify the effectiveness of DCO and determine a proper value for MAC parameters, we conduct experimental simulations under IEEE 802.11n PHY/MAC environments. The simulation results show that the reduced CWmin has the most significant effect on the channel occupancy. The Wi-Fi backscatter devices achieve much higher throughput than the separate cases when two or more configurations are used simultaneously. Moreover, the results exhibit that the use of SIFS between consecutive packets supports reliable burst transmission regardless of the transmission of the legacy Wi-Fi devices in the vicinity.
The huge demand for high data rate machine-to-machine (M2M) services has led to the use of millimeter Wave (mmWave) band communications with support for a multi-Gbps data rate through the use of directional antennas. However, unnecessary sector switching in multicast transmissions with directional antennas results in a long delay, and consequently a low throughput. We propose asymmetric directional multicast (ADM) for capillary M2M to address this problem in mmWave communications. ADM provides asymmetric sectorization that is optimized for the irregular deployment pattern of mulicast group members. In ADM, an M2M gateway builds up asymmetric sectors with a beamwidth of a different size to cover all multicast group members with the minimum number of directional transmissions. The performance of ADM under various simulation environments is evaluated through a comparison with legacy mmWave multicast. The results of the simulation indicate that ADM achieves a better performance in terms of the transmission sectors, the transmission time, and the aggregate throughput when compared with the legacy multicast method.
This paper presents a residual energy estimation-based medium access control (REE-MAC) protocol for wireless powered sensor networks (WPSNs) composed of a central coordinator and multiple sensor devices. REE-MAC aims to reduce overhead due to control messages for scheduling the energy harvesting operation of sensor devices and provide fairness for data transmission opportunities to sensor devices. REE-MAC uses two types of superframes that operate simultaneously in different frequency bands: the wireless energy transfer (WET) superframe and wireless information transfer (WIT) superframe. At the beginning of each superframe, the coordinator estimates the change in the residual energy of individual sensor devices caused by their energy consumption and energy harvesting during the previous superframe. It then determines the devices’ charging priorities, based on which it allocates dedicated power slots (DPSs) within the WET superframe. The simulation results demonstrated that REE-MAC exhibits superior performance for the harvested energy, average freezing time, and fairness to existing representative WPSN MAC protocols.
IEEE 802.15.4 Time Slotted Channel Hopping (TSCH) is designed to provide high reliability and predictable time delay for industrial applications that require strict preconditions. IEEE 802.15.4 TSCH operates on the slotframe structure consisting of multiple slotOffsets and channelOffsets. However, the IEEE 802.15.4-2015 standard does not specify how to determine the slotframe length. Thus, the inappropriate slotframe length can cause a long end-to-end delay in industrial applications. Therefore, in this paper, we analyze the impact of the slotframe length on the end-to-end delay performance in IEEE 802.15.4 TSCH network. The results of the analysis can be used as the guideline that determines the appropriate slotframe length for various industrial applications.