Micro- and nanofiber (NF) hydrogels fabricated by electrospinning to typically exhibit outstanding high porosity and specific surface area under hydrated conditions. However, the high crystallinity of NFs limits the achievement of transparency via electrospinning. Transparent poly(vinyl alcohol)/β-cyclodextrin polymer NF hydrogels contacted with reverse iontophoresis electrodes were prepared for the development of a non-invasive continuous monitoring biosensor platform of interstitial fluid glucose levels reaching ~ 1 mM. We designed the PVA/BTCA/β-CD/GOx/AuNPs NF hydrogels, which exhibit flexibility, biocompatibility, excellent absorptivity (DI water: 21.9 ± 1.9, PBS: 41.91 ± 3.4), good mechanical properties (dried: 12.1 MPa, wetted: 5.33 MPa), and high enzyme activity of 76.3%. Owing to the unique features of PVA/β-CD/GOx containing AuNPs NF hydrogels, such as high permeability to bio-substrates and rapid electron transfer, our biosensors demonstrate excellent sensing performance with a wide linear range, high sensitivity(47.2 μA mM−1), low sensing limit (0.01 mM), and rapid response time (< 15 s). The results indicate that the PVA/BTCA/β-CD/GOx/AuNPs NF hydrogel patch sensor can measure the glucose concentration in human serum and holds massive potential for future clinical applications.
In this study, we aimed to develop a cellulose/β-cyclodextrin (β-CD) electrospun immobilized GOx enzyme patch with reverse iontophoresis for noninvasive monitoring of interstitial fluid (ISF) glucose levels (0.1–0.6 mM dm−3).
Self-regulated “smart” insulin administration system that mimic pancreatic endocrine function would be highly desirable for diabetes management. Here, a glucose-responsive continuous insulin delivery system is developed, where novel polyhedral oligosilsesquioxane (POSS) modified with 3‐aminophenylboronic acid (APBA) were used to encapsulate insulin (insulin entrapment efficiency: 73.2%) to prepare a fast response, high stability, good distribution, and excellent biocompatible system. Due to the strong hydrophobicity of POSS, the POSS moiety is located at the core in aqueous solution and combines with the boronic group of APBA and the diol generated in PEG-insulin to form a nanomicelle structure, that is, nanoparticles naturally. Micelles self‐assembled from these molecules possess glucose‐responsiveness at varying glucose concentrations. The interaction of the PBA and diol containing insulin via boronate ester bond and its interchange with glucose was investigated by FT-IR, 1H NMR and XPS. Furthermore, the successful glucose-triggered release of insulin from the POSS-APBA micelles was investigated at neutral pH. A linear graph was plotted with the measured released insulin vs glucose concentrations, with a linear correlation coefficient (R2) value close to 1. Circular dichroism (CD) spectroscopy analysis was performed to measure insulin activity by comparing secondary structures of insulin, PEG-Insulin, and POSS-APBA@insulin. When confirming intracellular apoptosis signaling, cleaved caspase 3 and caspase 9 were not increased by 640 μg/ml POSS-APBA and POSS-APBA@insulin in HeLa, HDF and HUVE cells. Application in the biomedical field for controlled delivery of insulin appear to be promising.
PH-sensitive PAA-POSS@DOX nanoparticles were synthesized and showed high loading efficiency of over 75% and doxorubicin was quickly released to the target area. The ability of PAA-POSS@DOX to kill MDA-MB-231 breast cancer cells has been demonstrated.
1 February 2019 in Materials Science and Engineering: C