Due to the different geological conditions and construction methods associated with different projects, rockbursts in deep-buried tunnels often present different precursor characteristics, bringing major challenges to the early warning of rockbursts. To adapt to the complexity of engineering, it is necessary to review the latest advancements in rockburst early warning and to discuss general early warning methods. In this article, first, microseismic monitoring and localization methods applicable under tunneling construction are reviewed. Based on the latest engineering examples and research progress, the microseismic evolution characteristics of the rockburst formation process are summarized, and the formation process and mechanism of structure-type and delayed rockbursts are analyzed. The different methods for predicting the risk and level of rockbursts using microseismic indices are reviewed, and the implementation methods and application cases for predicting potential rockburst areas and rockburst probability based on a mechanical model are expounded. Finally, combined with the new practice in early warning methods, development directions for the early warning of rockbursts are put forward.
Deepening our understanding of temperature and stress evolution in high-temperature tunnels is indispensable for tunnel support and associated disaster prevention as the rock temperature is remarkably high in hot dry rock (HDR) utilization and similar tunnel engineering. In this paper, we established a two-dimensional thermal–mechanical coupling model through RFPA2D-thermal, by which the temperature and stress field of the surrounding rock in a high-temperature tunnel with and without thermal insulation layer (TIL) were studied, followed by the evolution of thermal cracks. The associated sensitivity analysis of the TIL and airflow factors were then carried out. We found that (1) the tunnel rock is unevenly cooled down by the cold airflow, which induces thermal stress and damages the rock element when it exceeds the tensile strength of the rock mass. Those damaged rock elements accumulate and coalesce into visible cracks in the tunnel rock as the ventilation time goes, reducing the tunnel stability. (2) TIL effectively reduces the heat exchange between the airflow and tunnel rock and weakens the cold shock by the airflow, delaying the crack initiation which provides efficient time to adopt engineering measures for tunnel supporting. (3) TIL parameters are of pivotal importance to the long-term cold shock by the airflow. Increasing the TIL thickness and reducing the TIL thermal conductivity both significantly enhance the thermal insulation effect. The results cover the gap in the study of cold shock in high-temperature tunnels, which is helpful in designs to prevent thermal damage in high-temperature tunnels.
27 February 2025 in Tunnelling and Underground Space Technology
The microseismic signals in the coal minefield are very complex because of its special environment with a large number of blast vibration signals, and how to effectively identify the microseismic signals is still a big problem. S transform (ST) and Manifold Learning (ML) methods are introduced to extract the characteristics of the microseismic signals, and Gaussian Mixture Model based on the improved Bee Colony optimization algorithm (IBC‐GMM) is established to identify the microseismic signals accurately. Firstly, the time‐frequency characteristics of microseismic signals in coal mine are extracted by ST analysis. It is found that there are obvious time‐frequency differences between rock‐fracturing signals and blast vibration signals. Blast vibration signals have short duration, high frequency, and complex frequency spectrum, and their dominant frequencies are mainly over 100 Hz. However, rock‐fracturing signals are relatively slow, with low frequency and stable spectrum change, and their dominant frequencies are generally below 100 Hz. Then, combining with the microseismic data of Xiashinjie coal mine in Tongchuan, China, the feature dimension reduction is carried out by Manifold Learning (ML) method, and the processed feature vectors are automatically recognized by IBC‐GMM. Field test results show that the method summarizes the characteristics of the microseismic wave which are difficult to emerge as the learning vector, and the features reflect the key features of microseismic signals well. The identification accuracy is as high as 94%, and its recognition effect is superior to other recognition models (such as traditional Gaussian Mixture Model based on Expectation‐Maximum (EM‐GMM), Backpropagation (BP) neural network, Random Forests (RF), Bayes (Bayes) methods, and Logistic Regression (LR) method). Therefore, IBC‐GMM could be used to mine engineering microseismic monitoring waveform recognition to provide the reference.