Contact problems are widely encountered in geotechnical engineering, such as the contact between soils and concrete used in earth and rockfill dams, tunnels and coastal levees. Due to the unknown contact region and contact forces, the contact problems have strong boundary nonlinearity. In addition, soils have been recognized as heterogeneous materials in geotechnical engineering. The existence of the soil heterogeneity increases the nonlinearity of the contact problems. Currently, the contact problems are mostly analysed without considering the soil heterogeneity, which may not reflect the contact behavior well. In order to investigate the influence of soil heterogeneity on the contact problems, in this paper, a simple plane-strain contact problem is analysed as an example. In this example, Young’s modulus is taken to be a spatially variable. The local average subdivision (LAS) is used to model the heterogeneity of Young’s modulus. The penalty method is utilised to determine the contact behavior. By the first use of linking the penalty method with the LAS, the proposed approach can be used to analyse the contact problems considering soil heterogeneity. The results show that the influence of soil heterogeneity on the elastic contact problems is significant. The contact forces of the heterogeneous case present apparent variation compared to the results of the homogeneous case. The distribution of the contact force at a specific point is also normal when Young’s modulus is normally distributed, moreover, the coefficient of variation (COV) and the horizontal scale of fluctuation of Young’s modulus affect the extent of variation of the normal contact forces. The standard deviation of the normal contact force increases with the increase of the COV and decreases with the increase of the horizontal scale of fluctuation of Young’s modulus. From the analyses, to better predict the deformation/stress in the contact problems, heterogeneity needs to be considered.
53.5% of China’s territory is seasonally frozen. Along with China’s fast social and economic development, more and more infrastructure facilities, e.g., railways, highways and hydraulic engineering projects, are being constructed in frozen soil areas. Since foundations are the underpinnings of these engineered structures, the performance of frozen soil foundations is critical to the safe and stable operation of these infrastructures. Frozen soil exhibits strong heterogeneity, which influences the prediction of the engineering performance of frozen soil foundations; however, previous studies have ignored this effect. In this paper, the coupling effect of thermal and hydraulic behavior and soil parameter heterogeneity of frozen soils is considered. A rectangular foundation is taken as an illustrative example, and COMSOL Multiphysics is applied to predict the coupled thermal and hydraulic behavior of frozen soil. Karhunen-Loève expansion is selected to capture the frozen soil parameters’ heterogeneity. Based on the analysis, the proposed framework can successfully calculate the stochastic frozen depth of the foundation. Due to the thermal conductivity’s heterogeneity of soil grains, the depth to which the foundation is frozen changes in a range rather than a single value in the deterministic analysis.
Site investigations of the soils are considered very important for evaluation of the site conditions, as well as the design and construction for the project built in it. Taihu tunnel is thus far the longest tunnel constructed in the lake in China, with an entire length of over 10 km. However, due to the very insufficient site data obtained for the lacustrine clay in the Taihu lake area, a series of self-boring pressuremeter (SBPM) field tests was therefore carried out. Undrained shear strengths were deduced from the SBPM test, with the results showing generally higher than those obtained from the laboratory tests, which may be attributed to the disturbance to the soil mass during the sampling process. Degradation characteristics of the soil shear modulus (Gs) were mainly investigated, via a thorough comparison between different soil layers, and generally, the shear modulus would cease its decreasing trends and become stable when the shear strain reaches over 1%. Meanwhile, it was found that a linear relationship between the plasticity index and the shear modulus, and between the decay rate of the shear modulus and the plasticity index as well, could be developed. Further statistical analysis over the undrained shear strength and shear modulus distribution of the soils shows that the undrained shear strength of the soils follows a normal distribution, while the shear modulus follows a log-normal distribution. More importantly, the spatial correlation length of the shear modulus is found much smaller than that of the undrained strength.
About Me
My research focuses on stability analysis of geotechnical engineering.
My research focuses on stability analysis of geotechnical engineering.