The objective of this study is to comprehensively investigate the printability characteristics of a selective laser melting (SLM) system, which will be achieved through the development of a benchmark test part. In addition, the effect of the build location on the dimensional accuracy and precision of 316 L stainless steel parts produced by SLM was thoroughly evaluated.
The fabrication of microfluidic components using low-cost Fused Deposition Modeling (FDM) presents an attractive alternative to conventional manufacturing methods, yet achieving microscale dimensional accuracy remains a significant challenge. This study investigates the influence of five key FDM parameters (nozzle temperature, bed temperature, printing speed, flow rate, and infill overlap) on the dimensional accuracy of microchannels printed with PETG and TPU filaments. A Taguchi L27 orthogonal array was employed to systematically evaluate the effects of these parameters on width and depth deviations across sub-millimeter microchannel geometries. Results show that for PETG, optimal dimensional fidelity was achieved at 240 °C nozzle temperature, 70 °C bed temperature, 30 mm/s speed, 100% flow rate, and 15% overlap, enabling reliable channel widths down to 100 µm. TPU exhibited greater variability due to its elasticity, with optimal settings found at 220 °C, 60 °C bed temperature, 30 mm/s, 100% flow rate, and 25% overlap. Signal-to-noise ratio and ANOVA analyses revealed flow rate and printing speed as dominant factors for both materials. The findings provide a reproducible optimization framework for microscale FDM fabrication and highlight material-specific process sensitivities critical to functional microfluidic device performance.
1 January 2024 in Incertitudes et fiabilité des systèmes multiphysiques
Over the last decade, there has been a large interest in the use of 3D printing to manufacture microfluidic devices, since it has the ability to circumvent traditional fabrication techniques limitations. These include being unable to really make complex three-dimensional architectures, expensive and time-consuming processes to change device designs, and difficulty transitioning from prototyping to mass production. In this literature review, we will look at the current trends in 3D printed microfluidics, as well as recent advances and new developments in fabrication techniques, materials, and applications. Integration of 3D printing in microfluidics research has helped in the rapid prototyping of fluidic channels and structures with high complexity at an effective cost. Applications of 3D printed microfluidics are described in the areas of healthcare, diagnostics, chemical synthesis, and biotechnology. This paper also delineates the challenges and future prospects of 3D printed microfluidics, giving insight into potential research directions and technological developments.
5 October 2026 in The International Journal of Advanced Manufacturing Technology