Triply periodic minimal surfaces (TPMS) have shown better mechanical performance, mass transfer, and thermal conductivity than conventional and strut-based structures, which have been employed in different disciplines. Most of the literature investigates different TPMS topologies in cooling channels to enhance thermal performance due to the smooth curvature and large surface area. However, a deeper investigation of the effects of TPMS design variables and the thermal performance advantages of cooling channels is required. This review details the effects of TPMS design variables, i.e., porosity, wall thickness, and unit cell size, on flow and heat transfer enhancement. It is found that varying the design variables significantly changes the flow and heat transfer characteristics. Also, by comparing TPMS and conventional cooling structures, it is found that most TPMS structures show better thermal performance than other strategies. Moreover, different fabrication methods for TPMS-based cooling channels in recent investigations are collected and discussed. In light of the reviewed literature, recommendations for future research suggest that more experimental and numerical studies on the flow and heat transfer for different cooling applications are needed. Therefore, this review serves as a reference tool to guide future studies on the flow and heat transfer of TPMS-based cooling channels.

Additive manufacturing allows the fabrication of relatively complex cooling structures, such as triply periodic minimal surface (TPMS), which offers high heat transfer per unit volume. This study shows the turbulent flow heat transfer and thermal stress of the Diamond-TPMS topology in the gas turbine blade trailing edge channel. The thermal-fluid-solid analysis of the Diamond-TPMS structure, made of directionally solidified GTD111, at the nearly realistic gas turbine condition is executed, and the results are compared with the conventional pin fin array at the Reynolds number of 30,000. Compared to the baseline pin fin structure, the Diamond-TPMS model distributes flow characteristics more uniformly throughout the channel. The overall heat transfer enhancement, friction factor ratio, and thermal performance are increased by 145.3%, 200.9%, and 32.5%, respectively. The temperature, displacement, and thermal stress in the Diamond-TPMS model are also distributed more evenly. The average temperature on the external surface in the Diamond-TPMS model is lower than the baseline pin fin array by 19.9%. The Diamond-TPMS network in the wedge-shaped cooling channel helps reduce the volume displacement due to the material thermal expansion by 29.3%. Moreover, the volume-averaged von Mises stress in the Diamond-TPMS structure is decreased by 28.8%.

This paper proposes two compact, efficient, and lightweight heat exchangers based on triply periodic minimal surfaces (TPMSs). Designed in an annular configuration, the heat exchangers meet the requirements of micro gas turbines for compactness. Two prototypes of Diamond and Gyroid modular TPMS heat exchangers were fabricated using selective laser melting (SLM) with stainless steel. The flow and heat transfer experimental results indicate that, within a Reynolds number range of 200 to 800, the effectiveness of both heat exchangers remained above 0.62, and the average Nusselt numbers of the Diamond and Gyroid structures reached 3.60 and 4.06 times that of the printed circuit heat exchanger (PCHE), respectively. Although both heat exchangers exhibited relatively high friction factors, their overall performance surpassed that of conventional heat exchangers. Additionally, performance comparisons with existing TPMS heat exchangers revealed that smaller lattice sizes contribute to improved volume-based power density, although they result in increased pressure loss. Simulation results indicated that the “merge–split” effect present in both structures enhances heat transfer between the fluid and the wall. Furthermore, the complex channels of the TPMS structures ensure that the fluid maintains strong turbulence intensity throughout the heat exchanger. This study demonstrates that stainless steel TPMS structures can serve as excellent candidates for applications in micro gas turbines.