In the present study, the mechanical behavior of Fiber-Reinforced Concrete (FRC) beams was studied under bending until rupture. Each beam was reinforced with a hybrid mix of short fibers randomly distributed in its volume. Concrete beams with three different fiber combinations were investigated, namely, beams reinforced with (1) a homogeneously distributed mix of short polypropylene fibers (PP) and steel fibers, (2) PP fibers and Alkali Resistant Glass (ARG) fibers, and (3) PP and composite fibers (CF). The amount of short PP fibers was the same in all FRCs. The investigation focused on the fracture mechanisms and the load-bearing capacity of FRC beams with the developing macro cracks. In total, 12 FRC composite prismatic specimens were casted and tested in four-point bending experiments (4PBT). The current load value versus the Crack Mouth Opening Displacement (CMOD) for all FRCs was analyzed. The crack opening relationship and the influence of fibers on the fracture energy and flexural tensile strength were determined. Rupture surfaces of all samples were investigated using an optical microscope.
17 June 2021 in ENVIRONMENT. TECHNOLOGIES. RESOURCES. Proceedings of the International Scientific and Practical Conference
Different authors conducted studies on fiber reinforced concretes (FRC) with carbon fibres of different lengths and some results showed that concrete mix with homogeneously distributed short fibres in their volume have good strength and ultra-strain compared to normal plain concrete mix. However, this study is focused more on 3-dimensional (3D) carbon fibre reinforced plastic (epoxy) CFRP composite thin rods frame used as a reinforcement in concrete which shows good increase in loadbearing and ductility. Were investigated concrete mixes with superplasticizer, nano-silica, quartz sand, fine natural sand and gravels. Diagonal cross bracing carbon fibre epoxy frames were used as a reinforcement giving better ductility results. Proposed study approach is to show that the reinforced concrete with provided materials have an increased performance in terms of ductility, sustainability, and load bearing in cracked statement. Total, four groups of concrete and each group with three beams were casted and tested in this experiment, three groups with three different shapes of carbon frames and three beams without frames to compare the mechanical properties after 28 days. Failure mechanisms in any particular case were analysed.