Red mud is a highly alkaline solid waste discharged in the alumina production process. Because of its large amount of discharge and high alkalinity, it is mostly stored in dams, occupying a large number of land resources and posing a great safety hazard to the ecological environment. The large-scale consumption of red mud is a global technical problem. Different alumina production processes will produce different types of red mud, mainly Bayer process red mud. In addition to its overall utilization in the field of building materials, agriculture, the environment, and the chemical industry, red mud also contains valuable metal elements, such as titanium, iron, scandium, and aluminum, and is an important secondary mineral resource. This paper focuses on the principle and characteristics of red mud metallurgical treatment for the extraction of valuable components and looks forward to the prospect of large-scale, harmless, and high-value comprehensive utilization technology for red mud in China.

Iron-rich bauxite residue (red mud) is a hazardous alkaline solid waste produced during the production of alumina from high-iron bauxite, which poses severe environmental challenges due to its massive stockpiling and limited utilization. In this study, metallic iron was recovered from high-iron red mud using the smelting reduction process. Thermodynamic analysis results show that an increase in temperature and sodium oxide content, along with an appropriate mass ratio of Al₂O₃ to SiO₂ (A/S) and mass ratio of CaO to SiO₂ (C/S), contribute to the enhancement of the liquid phase mass fraction of the slag. During the smelting reduction process of high-iron red mud, iron recoveries for low-alkali high-iron red mud and high-alkali high-iron red mud under optimal conditions were 98.14% and 98.36%, respectively. The metal obtained through reduction meets the industrial standard for steel-making pig iron, which is also confirmed in the pilot-scale experiment. The smelting reduction process of high-iron red mud can be divided into two stages, where the reaction is predominantly governed by interfacial chemical reaction and diffusion control, respectively. The apparent activation energy of high-alkali high-iron red mud is lower than that observed for low-alkali high-iron red mud. The reduced slag can be used as a roadside stone material or cement clinker. This proposed method represents a sustainable process for the comprehensive utilization of high-iron red mud, which also promotes the minimization of red mud.