Dams play a vital role in securing water and electricity supplies for households and industry, and they contribute significantly to flood protection. Regular monitoring of dam deformations holds fundamental socio-economic and ecological importance. Traditionally, this has relied on time-consuming in situ techniques that offer either high spatial or temporal resolution. Persistent Scatterer Interferometry (PSI) addresses these limitations, enabling high-resolution monitoring in both domains. Sensors such as TerraSAR-X (TSX) and Sentinel-1 (S-1) have proven effective for deformation analysis with millimeter accuracy. Combining TSX and S-1 datasets enhances monitoring capabilities by leveraging the high spatial resolution of TSX with the broad coverage of S-1. This improves monitoring by increasing PS point density, reducing revisit intervals, and facilitating the detection of environmental deformation drivers. This study aims to investigate two objectives: first, we evaluate the benefits of a spatially and temporally densified PS time series derived from TSX and S-1 data for detecting radial deformations in individual dam segments. To support this, we developed the TSX2StaMPS toolbox, integrated into the updated snap2stamps workflow for generating single-master interferogram stacks using TSX data. Second, we identify deformation drivers using water level and temperature as exogenous variables. The five-year study period (2017–2022) was conducted on a gravity dam in North Rhine-Westphalia, Germany, which was divided into logically connected segments. The results were compared to in situ data obtained from pendulum measurements. Linear models demonstrated a fair agreement between the combined time series and the pendulum data ($R^2$ = 0.5; MAE = 2.3 mm). Temperature was identified as the primary long-term driver of periodic deformations of the gravity dam. Following the filling of the reservoir, the variance in the PS data increased from 0.9 mm to 3.9 mm in RMSE, suggesting that water level changes are more responsible for short-term variations in the SAR signal. Upon full impoundment, the mean deformation amplitude decreased by approximately 1.7 mm toward the downstream side of the dam, which was attributed to the higher water pressure. The last five meters of water level rise resulted in higher feature importance due to interaction effects with temperature. The study concludes that integrating multiple PS datasets for dam monitoring is beneficial particularly for dams where few PS points can be identified using one sensor or where pendulum systems are not installed. Identifying the drivers of deformation is feasible and can be incorporated into existing monitoring frameworks.

This study introduces an amplitude-based method that applies Spatially Variant Apodization (SVA) to reduce sidelobes in Synthetic Aperture Radar (SAR) data. Unlike conventional approaches, the filter is applied only to the amplitude while preserving the original interferometric phase, thereby enabling accurate Persistent Scatterer Interferometry (PSI) for dam deformation monitoring in Stanford Method for Persistent Scatterers (StaMPS) software. The SVA filter is integrated as an additional processing step within the Sentinel Application Platform (SNAP) for the SentiNel Application Platform to Stanford Method for Persistent Scatterers (SNAP2StaMPS) workflow. Filtering is performed in two dimensions (azimuth and range) separately on the In-phase (I) and Quadrature (Q) components of the coregistered data using a Python-based implementation via SNAP-Python (snappy). By recombining the SVA-filtered and original I and Q components, the method modifies only the amplitude while leaving the phase unchanged. The approach is evaluated in a proof-of-concept case study of the Sorpe Dam in Germany, where an Electronic Corner Reflector - C Band (ECR-C) produces sidelobe artifacts that degrade the Sentinel-1 (S-1) descending time series. The results demonstrated a successful integration of SVA filtering into the SNAP2StaMPS framework, achieving sidelobe reduction and improved Persistent Scatterer (PS) detection without compromising phase quality. The number of sidelobe-affected PS decreased by 39.26% after SVA filtering, while the amplitude-based approach preserved the original phase and deformation values, with a Root Mean Square Error (RMSE) of approximately 0.38 mm. Overall, this novel amplitude-based SVA approach extends the SNAP2StaMPS workflow by reducing strong sidelobes while preserving phase information for dam monitoring at the Sorpe dam site.