Liter Siek

Prof. Dr. Liter Siek

orcid

Research Focus & Metrics

Academic Career Length

35Years (1992-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 March 2014 in IEEE Sensors Journal
Verified
Journal Article
Closed access
WTWang Yun Toh
Wang Yun Toh
YTYen Kheng Tan
Yen Kheng Tan
WKWee Song Koh
Wee Song Koh
LSLiter Siek
Liter Siek
Distributed wearable wireless sensors are widely employed in wireless body sensor network for various physiological monitoring purposes like health or performance related monitoring applications. The real challenges in employing these wearable wireless sensors on human subjects include: 1) bulky and rigid system design thus, it is difficult to conform to human body contour and 2) limited operational lifespan of batteries with finite energy supply. In this paper, an autonomous body-worn wireless sensor node with flexible energy harvesting (FEH) mechanism, able to conform to body contour, is proposed for biometric monitoring. To be totally sustainable and compact, the FEH mechanism is equipped with an ultralow power management circuit (PMC) specially designed on a flexible PCB. The flexible PMC is able to transfer near maximum electrical power from the input solar energy source to store in the supercapacitor for powering the wireless sensor node. The power consumption of the flexible PMC is only 32.86 μW. Experimental results show that under indoor condition, typical average lighting intensity of 320 lux, the wearable sensor node is able to continuously monitor the temperature of the wearer, read, and transmit back to the base node in a wireless manner, without the need of any battery. In addition, the designed FEH sensor node flexed onto the wearer body contour at an angle of 30° generates 56 μW of electrical power, sufficient to sustain its operation for >15h.

6 October 2015 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
GYGuolei Yu
Guolei Yu
KCKin Wai Roy Chew
Kin Wai Roy Chew
ZSZhuo Chao Sun
Zhuo Chao Sun
HTHoward Tang
Howard Tang
LSLiter Siek
Liter Siek
This paper presents a single-inductor dual-input- tri-output buck-boost (DITOBB) converter that manages energy harvesting, energy storage, and power rail regulation of an indoor remote sensor system. The converter operates in discontinuous conduction mode (DCM) and regulates the outputs with a combination of pulse-skipping modulation (PSM) and constant-ON-time pulse-frequency modulation (PFM). To reduce the quiescent power, all the circuit blocks are turned OFF when the outputs are within regulation, except a system clock generator. A newly designed relaxation oscillator provides the main clock of the system, which requires neither reference voltages nor comparators. The frequency of the system clock doubles or halves based on the states of the sources and outputs following a proposed algorithm. The DITOBB converter has been designed and fabricated using 0.18 μm CMOS process. With a quiescent power of 400 nW, the designed DITOBB converter shows a measured peak efficiency of 83% at 100 μW output power.

27 January 2009 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Verified
Journal Article
Closed access
HLHai Qi Liu
Hai Qi Liu
WGWang Ling Goh
Wang Ling Goh
LSLiter Siek
Liter Siek
WLWei Meng Lim
Wei Meng Lim
YZYue Ping Zhang
Yue Ping Zhang
A 7-GHz CMOS voltage controlled ring oscillator that employs multiloop technique for frequency boosting is presented in this paper. The circuit permits lower tuning gain through the use of coarse/fine frequency control. The lower tuning gain also translates into a lower sensitivity to the voltage at the control lines. Fabricated in a standard 0.13-mum CMOS process, the proposed voltage-controlled ring oscillator exhibits a low phase noise of -103.4 dBc/Hz at 1 MHz offset from the center frequency of 7.64 GHz, while consuming a current of 40 mA excluding the buffer.

1 May 2009
Verified
Conference Paper
Closed access
FLFei Li
Fei Li
Chip Hong ChangChip Hong Chang
Chip Hong Chang
LSLiter Siek
Liter Siek
In this paper, an analog current mode implementation of a neuron circuit capable of performing real Gaussian neighborhood taper learning is presented. The neuron cell is compacted with a reusable multiplier that can function as squarer and multiplier for Euclidean and topological distances calculation as well as for Gaussian function characteristics with adjustable learning rate. A four-neuron self-organizing map (SOM) with three dimensional input data is designed and simulated using CSM 0.18 mum technology to demonstrate the learning control and neighborhood adaptation. The network can process 4.55 million vectors per second with a minimum power consumption of 1.6 mW at 1.5 V.

1 November 2016 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
YLYoon Hwee Leow
Yoon Hwee Leow
HTHoward Tang
Howard Tang
ZSZhuo Chao Sun
Zhuo Chao Sun
LSLiter Siek
Liter Siek
As technology scales, integrating high resolution ADCs into high fidelity mixed signal systems becomes challenging in advanced CMOS processes. Cascading integrators to achieve high-order filter structures limits the modulation index and compromises on stability at the expense of added hardware and power consumption. To optimize the maximum stable amplitude (MSA) to accommodate a larger input dynamic range, the supply rails have to be expanded, which limited technology choices to those of a larger feature size. This work proposes a 25 kHz 3rd-order continuous-time ΔΣ modulator (CTΔΣM) utilizing a 5-bit SAR quantizer, enabling noise coupling (NC) to be possible in a typical nanoscale CMOS 65 nm technology with VDD of 1 V. Mismatches in SAR comparator and DAC array are mitigated with a proposed calibration scheme while CM mismatches are solved by a floating differential charge storage capacitor (FDCSC) coupling method. To allow sufficient time for SAR bit cycling and noise charge feedback settling, 1 Ts excess loop delay (ELD) is compensated with digital differentiation that minimizes both the power and complexity of the auxiliary feedback DAC. The prototype obtained DR/SNR/SNDR of 103.1 dB/100.1 dB/95.2 dB while dissipating 0.8 mW, hence achieving a FoMSNDR and FoMschreier of 0.34 pJ/level and 177.9 dB, respectively.

17 July 2015 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
CYChengyue Yu
Chengyue Yu
LSLiter Siek
Liter Siek
During mass production, bandgap reference failure can cause chip failure, resulting in yield loss. A bandgap reference with robust start-up behavior is therefore needed. In this brief, the issue of multiple operating points is examined, along with a prior art low-voltage current-mode bandgap reference (CMBGR) structure. A CMBGR structure with only two stable operating points is proposed, which can be reliably started up with a very simple pulse generator circuit and a power-up signal. The bandgap reference is implemented in 40-nm technology, achieving a 41.5-ppm/°C nominal temperature coefficient. The current consumption is 40 μA and the active area is 0.0094 mm 2 .