The vigorous development of low-head hydraulic resources and tidal energy with greater stability and predictability is drawing attention to tubular turbines. However, many problems, such as incorrect unit association relationship, insufficient unit output, and severe vibration, occur frequently in tubular turbines, particularly when the water head is low. These phenomena cannot be known through model machine tests and numerical studies. Therefore, this study takes the tubular turbine with different water heads as the research object, in accordance with the actual boundary conditions. The unsteady numerical research for the prototype machine is conducted while considering the free surface in the reservoir area and water gravity. The internal flow characteristics of the tubular turbine with different water heads and the influence of free surface on its performance are analyzed. The research indicates the following: affected by the free surface and the water gravity, the pressure in the entire flow passage of the horizontal tubular turbine increases with the increase in the submerged depth. In addition, the short water diversion section allows the water flow from the reservoir area to still have a certain asymmetry before reaching the runner. During the rotation process of the runner, the surface pressure and torque of the blade have evident periodic fluctuations, and the amplitude of the fluctuations will increase significantly with the decrease in H/D1. Moreover, in the case of small H/D1, the amplitude of pressure pulsation in the draft tube is larger, and concentrated high-frequency pressure pulsation occurs. These factors will lead to the occurrence of material fatigue damage, unstable output, and increased vibration in low-head tubular turbines.
Hydropower unit is the compensation power generation of the energy regulating unit in wind–solar–water multi-energy complementary systems that often require the turbine to operate in a partial working condition area, thereby resulting in problems of low hydraulic efficiency and severe vibration during operation. A multi-objective and multi-condition optimization design method for Francis turbine runner based on the super-transfer approximation approach was proposed in this study. The proposed method aims to improve the hydraulic performance of the turbine, enhance and suppress the vibration of the turbine, and expand the operation range of the turbine on the basis of the actual situation given that Francis turbine frequently operates in low- and ultralow-load areas under the condition of multi-energy complementarity and continuous adjustment of operating conditions. Different operating conditions from low load to full load were selected as performance evaluation conditions. The super-transfer approximation method was used to select the weight co-efficient of water turbine operating conditions, and a multi-objective optimization function with the efficiency and cavitation performance of the water turbine as optimization objectives was constructed to ensure that the optimized water turbine can achieve the optimal performance in the full working condition range. Results showed that the pressure distribution on the blade surface of the optimized runner was uniform and the working ability was enhanced under the condition of ensuring the performance stability of optimal and rated conditions when the original runner was optimized. The hydraulic efficiency of the turbine under the low-load conditions OP1 and OP2 increased by 4.61 and 3.17%, respectively. Hence, the optimized runner is suitable for hydraulic turbines under multi-energy complementary conditions. The results of this study can provide a reference for the optimal design and operation of the turbine runner.