This research raises the topic of modern technology in the field of rice fields. The problem in this research is determining the fuzzy inference system algorithm for electronic engineering. The prototype was built by Raspberry Pi and python-based to the internet of things. The objective of this research is to design a new model for the rice field monitoring/control system and display every condition based on the internet of things. So that the hypothesis of this research can answer the phenomena that occur in rice fields, including drought problems, maintained plant conditions. The test results showed that irrigation control automatically runs optimally by scheduling, automatic irrigation control of water pH degree value detection analyzed by fuzzy Tsukamoto method at Z=3.5 defuzzification value for low and high irrigation control, and Z value=1.83 for normal irrigation control. Furthermore, the scheduling of spraying liquid fertilizer obtained the results of duration for 60 min in accordance with the needs of fertilizer dose. Lastly, for monitoring data on the website successfully accessed anywhere from the use of hosting servers and domains. Finally, it can be concluded that fuzzy Tsukamoto's algorithm is appropriate to be applied to the modern rice field system.
Currently, the Tire Pressure Monitoring System (TPMS) only monitors the condition of a tire pressure. However, there are no particular reactions taking place after the value of its tire pressure is discovered. In fact, the value of a tire pressure determines driving comfort and safety Therefore, this research proposed a method to integrate a TPMS and a Pressure Sensor Base (PSB) with a particular reaction required to fulfill tires automatically. The proposed TPMS has an electronic device unit directly attached to a tire’s valve. This unit includes pressure sensors, microcontrollers, Bluetooth transmitters and batteries. An alert system is generated whenever tire pressure exceeds the maximum or minimum safe pressure level. Moreover, if the pressure measured is below the lowest level of the desired pressure, it will automatically activate the compressor. Several experiments have been carried out to analyze the proposed system. The integrated TPMS has proven to be able to be an alternative tool for the automotive sector to keep maintaining the tires and to improve a driving comfort and safety.
23 March 2024 in International Journal of Electronics and Telecommunications
The current technological development is SD-WAN (Software-Defined Wide Area Network) which provides highperformance access for users located far from the head office so as to allow faster network connections and has been facilitated automation techniques for branch offices. This research solves the problem of XYZ company because it is known that the company requires network connectivity with a high SLA (Service Level Agreement) and no downtime in the information exchange process. This research hypothesis assumes that using SD-WAN would be ideal and the problems with XYZ company were resolved. The purpose of this research is the implementation of a WAN network using SD-WAN technology against two ISPs on the FortiGate router, as well as testing QoS (Quality of Service) that has been configured using the BGP (Border Gateway Protocol) routing method. This research plan consists of ISP-A using IP-VPN (Internet Protocol-Virtual Private Network) and ISP-B using broadband Internet. The test scenario was carried out using 3 methods, namely Full Service Scenario, Fail Over Scenario-1 when the IP VPN service is down and Fail Over Scenario-2 when the broadband Internet service is down. The final results of the research have obtained "Satisfactory" results for both services, including the average index on ISP-A and ISP-B of 3.7.
1 December 2020 in IOP Conference Series: Materials Science and Engineering
The use of sensors for safety and comfort in vehicles has increased, as in several studies that are being discussed, including the use of pressure sensors for applications in the TPMS system or face recognition system security. The purpose of this research is to reduce vehicle theft that is happening right now. This system consists of a face recognition system. This reason is based on the ineffectiveness of the vehicle handlebar / steering lock. But in this study, a vehicle safety prototype was designed with a face recognition method in the hope that this prototype was designed to provide a sense of comfort, security and also the vehicle becomes a privacy vehicle. The method used is the Local Binary Path Histogram method to detect image objects and a small camera to capture images of the face, using the Raspberry Pi as a tool control center (in which the process occurs: Scanning, Extracting, Comparing, Matching, and all have been incorporated in OpenCV). The output of this study is the face that has been recorded in the database as access to open access to vehicle security. The conclusion of this research is the process of facial recognition in real time activating the vehicle ignition lock system.
Permasalahan yang sering muncul pada sungai atau kali adalah tidak adanya peringatan akan terjadinya banjir sehingga menyebabkan air meluap tidak terbendung dan menyebabkan banjir. Dari masalah tersebut maka muncul ide untuk membuat alat otomatis yang berfungsi untuk memberi peringatan akan terjadinya banjir dengan harapan dapat menjawab permasalahan banjir yang tidak dapat diprediksi. Sistem inipun dilengkapi dengan prototype dan bisa memberikan informasi status siaga dan potensi banjir melalui SMS. Konsep kerja prototype ini sensor reed switch mendeteksi curah hujan dengan perhitungan Fuzzy Logic yang akan menentukan berapa persen akan terjadi banjir dan sensor ultrasonic mendeteksi ketinggian air, setelah itu akan dikirimkan ke Arduino. Pada Arduino akan mengeluarkan dua jenis mode yaitu manual dan otomatis, mode manual akan mengirimkan peringatan curah hujan, status siaga, dan potensi banjir melalu SMS, serta otomatis akan menampilkan data pada LCD berupa informasi curah hujan, status siaga, dan potensi banjir. Berdasarkan hasil analisa dan pengujian yang telah dilakukan pada penelitian ini, jika level status siaga masih dibawah siaga 3 Arduino tidak akan mengirimkan peringatan melalui SMS, hanya menampilkan informasi melalui LCD saja walaupun curah hujan deras. Namun jika status siaga sudah lebih dari siaga 3, Arduino akan mengirimkan peringatan melalui SMS. Perancangan yang dibuat dapat menampilkan hasil di LCD berupa curah hujan, status siaga, dan ketinggian air dalam waktu 2 detik dan dapat mengirimkan informasi yang serupa melalui SMS dalam waktu 4 detik setiap curah hujan atau ketinggian air berubah. Dari hasil ini menunjukan bahwa prototype “Rancang Bangun Alat Pendeteksi Banjir Menggunakan Arduino Dengan Metode Fuzzy Logic “ berhasil dibuat