Ali MESSAI

Dr. Ali MESSAI

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2020 in Journal of Mining and Metallurgy A: Mining
Verified
Journal Article
Open access
PDF file
AMAli MESSAI
Ali MESSAI
AIA. Idres
A. Idres
Juan M. Menendez-AguadoJuan M. Menendez-Aguado
Juan M. Menendez-Aguado
The recent developments of steel and iron industries generated a huge consumption of iron ores which has attracted much attention for utilizing low-grade iron resources to satisfy this increasing demand. The present study focuses on the characterization and enrichment of the low-grade iron ores from Rouina deposit-Ain Defla-. Currently, the ore is used in the cement industry because it is considered a low-grade iron ore. After the sampling process, a physico-chemical and mineralogical characterization was carried out and the results revealed that the sample consists of hematite, limonite and goethite as major opaque oxide minerals whereas silicates as well as clays form the gangue minerals in the sample. The average grade of FeTotal, SiO2 and Al2O3 contents in the raw material collected from the mine of the case study are 30.85%, 23.12% and 7.77% respectively. Processes involving combination of classification, washing and dry high-intensity magnetic separation were carried out to upgrade the low-grade iron ore sample to make it suitable as a marketable product. The sample was first ground and each closed size sieve fractions were subjected to washing followed by drying than dry high intensity magnetic separation and it was observed that limited upgradation is possible. As a result, it was possible to obtain a magnetic concentrate of 54.09% with a recovery degree of 89.30% and yield of 62.82% using a magnetic field intensity equal to 2.4 Tesla at the size fraction [-0.125 +0.063 mm].

2 November 2018 in Journal of Geology, Geography and Geoecology
Verified
Journal Article
Open access
PDF file
AMAli MESSAI
Ali MESSAI
AIAbdelaziz Idres
Abdelaziz Idres
BABENSELHOUB AISSA
BENSELHOUB AISSA
The Rouina mine is one of the oldest operated mines of iron ore in Algeria, its product is used like an adjuvant in the cement industry because the extracted raw material is considered as a low-grade ore. The present paper investigates on the one hand its mineralogical composition with the aim of understanding the morphology, texture, phase identification and iron properties; and on the other hand studying the influence of washing on its quality. For characterization, X-Ray Diffractions (XRD) of collected samples, analysis of thin sections with scanning electron microscope (SEM), and a sieve analysis followed by washing of each size fraction using a sieve mesh 0.074 µm were adopted. The obtained results revealed that the raw material of the Rouina mine is clayey low-grade iron ore and it is possible to obtain a pre-concentrate through the washing method. This article suggests in addition conducting deep studies of Rouina iron ore with physico-chemical characterization in order to confirm the prior results (mineralogical characterization) and then to permit a suitable enrichment method to be applied with the aim of obtaining a high-grade iron ore acceptable for the metallurgical industry.

20 March 2025 in Minerals
Verified
Journal Article
Open access
PDF file
AMAli MESSAI
Ali MESSAI
Juan M. Menendez-AguadoJuan M. Menendez-Aguado
Juan M. Menendez-Aguado
LBLinda Berrekbia
Linda Berrekbia
IMIkram Meramria
Ikram Meramria
BFBegoña Fernández
Begoña Fernández
ABAmir Boustila
Amir Boustila
Zinc processing tailings (ZPTs) of the Kharzet Youcef processing complex, Setif, Algeria, are mainly stockpiled in tailing dumps without use, occupying significant surfaces and negatively influencing the human environment and health. Incorporating ZPTs into building materials manufacturing is an effective solution to meet the dual objectives of environmental protection and economic development. This study investigates the influence of firing temperature and integrating ZPTs as a partial replacement for clay on the physic-mechanical properties of fired clay bricks (FCBs). Microstructural, chemical, and mineralogical analyses of ZPTs and clay were carried out by SEM-EDS, XRF, and XRD, respectively. Seven mixtures were produced with various percentages of ZPTs added to clay (0%, 5%, 10%, 15%, 20%, 25%, and 30%) and were fired at two different temperatures (900 and 1000 °C) at a ramp rate of 5 °C. Physic-mechanical tests were carried out on different brick specimens, and the results obtained showed that the FCBs incorporated with 10% of ZPTs produced the highest flexural strength of 6.24 MPa, compressive resistance of 29.78 MPa, bulk density of 1.37 g/cm3, and water absorption of 15.1% at 900 °C. Therefore, the recycling of ZPTs for FCBs manufacturing is feasible and an effective alternative waste disposal solution for sustainable development while reducing negative environmental impacts.

22 July 2018
Verified
Book Chapter
Closed access
PDF file
AMAli MESSAI
Ali MESSAI
IAI. Abdelaziz
I. Abdelaziz
OMO. H. Malek
O. H. Malek
MMM. Mohamed
M. Mohamed

30 October 2025 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
HAH Alem
H Alem
MAM Aissaoui
M Aissaoui
AMAli MESSAI
Ali MESSAI
EBE. Yo Brahim
E. Yo Brahim
Purpose. To reconstruct the geological evolution of the Ain Sedma magnetite lodes, located in NE Algeria. Methodology. The petrographic and elemental composition of the ores were determined using energy dispersive spectroscopy and elemental mapping whilst oxygen isotope ratios were measured on rock samples and high purity mineral separates from the Ain Sedma iron. Findings. Petrographic observations show massive texture, spherulitic lamellae, skeletal growths, dendritic branching, and rare vesicular crystals. Major constituents are iron oxides with quartz being the most dominant gangue mineral. Oxygen isotope analysis for both host rock and iron ores gave 18O values ranging from 19.1 to 22.5 ‰ V-SMOW and 15.9 to 20.3 ‰ V-SMOW, respectively. These results support the involvement of an 18O-rich and Fe- rich component in the genesis of the host rock and the associated mineralization. Originality. The present study is the first to combine geochemical data and petrographic observations to establish the genesis processes the mineralization and the host rock have passed through, from the beginning of partial melting until magma eruption. Practical value. These results are the first geochemical analysis delivered in the area which focuses mainly on the genetic model of the host rock and the mineralization as well as their mutual relationships.

1 January 2025
Verified
Conference Paper
Open access
PDF file
AMAli MESSAI
Ali MESSAI
LBLinda Berrekbia
Linda Berrekbia
IMIkram Meramria
Ikram Meramria
Juan M. Menendez-AguadoJuan M. Menendez-Aguado
Juan M. Menendez-Aguado
BFBegoña Fernández
Begoña Fernández
ABAmir Boustila
Amir Boustila
Zinc processing tailings (ZPTs) from the Kharzet Youcef processing complex (Setif-Algeria) are mainly stockpiled in tailings dumps without use, occupying a significant area with potentially influencing the environment and human health. Incorporating ZPTs in building materials manufacturing is an effective solution to meet the dual objectives of environmental protection and economic development. The study investigates the influence of integrating ZPTs to partially replace clays and firing temperature on the physic-mechanical properties of fired clay bricks (FCB). Microstructural, chemical, and mineralogical analyses of ZPT and clays were carried out by SEM-EDS, XRF and XRD, respectively. Seven mixtures were produced with various percentages of ZPTs added to clays (0%, 5%, 10%, 15%, 20%, 25% and 30%) and were fired to three different temperatures (950, 1000 and 1050 °C) at a ramp rate of 5 °C. Physic-mechanical tests were carried out on different brick specimens, and the results obtained showed the FCB incorporated with 30% of ZPTs produced the highest flexural strength of 6.24 MPa, compressive resistance of 29.78 MPa, bulk density of 1.37 g/cm3 and water absorption of 15.1% at 900 °C. Therefore, recycling ZPTs for FCB manufacturing is a feasible alternative waste disposal solution for sustainable development while reducing negative environmental impacts.