Insect cuticle is a biological composite with a high degree of complexity in terms of both architecture and material composition. Given the complex morphology of many insect body parts, finite-element (FE) models play an important role in the analysis and interpretation of biomechanical measurements, taken by either macroscopic or nanoscopic techniques. Many previous studies show that the interpretation of nanoindentation measurements of this layered composite material is very challenging. To develop accurate FE models, it is of particular interest to understand more about the variations in the stiffness through the thickness of the cuticle. Considering the difficulties of making direct measurements, in this study, we use the FE method to analyse previously published data and address this issue numerically. For this purpose, sets of continuous or discontinuous stiffness profiles through the thickness of the cuticle were mathematically described. The obtained profiles were assigned to models developed based on the cuticle of three insect species with different geometries and layer configurations. The models were then used to simulate the mechanical behaviour of insect cuticles subjected to nanoindentation experiments. Our results show that FE models with discontinuous exponential stiffness gradients along their thickness were able to predict the stress and deformation states in insect cuticle very well. Our results further suggest that, for more accurate measurements and interpretation of nanoindentation test data, the ratio of the indentation depth to cuticle thickness should be limited to 7% rather than the traditional ‘10% rule’. The results of this study thus might be useful to provide a deeper insight into the biomechanical consequences of the distinct material distribution in insect cuticle and also to form a basis for more realistic modelling of this complex natural composite.
The cuticle plays an important role in the evolutionary success of insects. Many studies on insect cuticles have reported a soft, resilin-rich endocuticle. However, a recent study indicated the presence of a sclerotised endocuticle in the weevil Pachyrhynchus sarcitis kotoensis, which contradicts former knowledge. To understand the degree of sclerotisation in the endocuticle of the weevil and its potential function, we first examined the endocuticle by microscopic and staining techniques. We next performed mechanical tests to measure the material properties of the endocuticle, and numerical simulations to predict the structural effect of the sclerotisation. Our results provide the first evidence of the existence of a sclerotised endocuticle and its remarkable function in improving the mechanical stability of the cuticle. This study highlights the finding of a high degree of sclerotisation in the stiff endocuticle of the weevil, especially the matrix surrounding the fibres. This novel case brings new understanding of cuticle properties and gives promising insights into biomaterial design.
15 July 2020 in Journal of The Royal Society Interface
The exoskeleton of nearly all insects consists of a flexible core and a stiff shell. The transition between these two is often characterized by a gradual change in the stiffness. However, the functional significance of this stiffness gradient is unknown. Here by combining finite-element analysis and multi-objective optimization, we simulated the mechanical response of about 3000 unique gradients of the elastic modulus to normal contacts. We showed that materials with exponential gradients of the elastic modulus could achieve an optimal balance between the load-bearing capacity and resilience. This is very similar to the elastic modulus gradient observed in insect cuticle and, therefore, suggests cuticle adaptations to applied mechanical stresses; this is likely to facilitate the function of insect cuticle as a protective barrier. Our results further indicate that the relative thickness of compositionally different regions in insect cuticle is similar to the optimal estimation. We expect our findings to inform the design of engineered materials with improved mechanical performance.
29 August 2018 in Journal of The Royal Society Interface
Nature has evolved structures with high load-carrying capacity and long-term durability. The principles underlying the functionality of such structures, if studied systematically, can inspire the design of more efficient engineering systems. An important step in this process is to characterize the material properties of the structure under investigation. However, direct mechanical measurements on small complex-shaped biological samples involve numerous technical challenges. To overcome these challenges, we developed a method for estimation of the elastic modulus of insect cuticle, the second most abundant biological composite in nature, through simple light microscopy. In brief, we established a quantitative link between the autofluorescence of different constituent materials of insect cuticle, and the resulting mechanical properties. This approach was verified using data on cuticular structures of three different insect species. The method presented in this study allows three-dimensional visualisation of the elastic modulus, which is impossible with any other available technique. This is especially important for precise finite-element modelling of cuticle, which is known to have spatially graded properties. Considering the simplicity, ease of implementation and high-resolution of the results, our method is a crucial step towards a better understanding of material–function relationships in insect cuticle, and can potentially be adapted for other graded biological materials.
Elongated rostra (snouts) are remarkable features of many female weevils. The female of Curculio glandium uses the snout to excavate channels in acorns to oviposit. Considering the slenderness of the rostrum, the excavation of channels in solid substrates without buckling is a challenging task from both engineering and biological points of view. Here we aimed to examine the roles of the material properties and morphology of the rostrum in its buckling resistance. We employed microscopy techniques, non-destructive material characterisation and finite element (FE) modelling to shed more light on the excavation mechanics of the rostrum. We found that sexual dimorphisms are present not only in the length but also in the material, particularly the elastic modulus, and morphological features, particularly the curvature and thickness of the cuticular layers. Our FE modelling showed that those factors play essential roles to maximise the buckling resistance and minimise the bending resistance of the female rostrum. Considering that during excavation, the rostrum needs to be straightened without buckling, the functionality of the rostrum is likely to be a compromise between the flexibility and stiffness.
In this paper, a new concept of extra-durable and sustainable wind turbine blades is presented. The two critical materials science challenges of the development of wind energy now are the necessity to prevent the degradation of wind turbine blades for several decades, and, on the other side, to provide a solution for the recyclability and sustainability of blades. In preliminary studies by DTU Wind, it was demonstrated that practically all typical wind turbine blade degradation mechanisms (e.g., coating detachment, buckling, spar cap/shell adhesive joint degradation, trailing edge failure, etc.) have their roots in interface degradation. The concept presented in this work includes the development of bio-inspired dual-mechanism-based interface adhesives (combining mechanical interlocking of fibers and chemical adhesion), which ensures, on the one side, extra-strong attachment during the operation time, and on the other side, possible adhesive joint separation for re-use of the blade parts. The general approach and physical mechanisms of adhesive strengthening and separation are described.