María del Pilar Aguilar-del Valle

Dr. María del Pilar Aguilar-del Valle

División de Ciencias Básicas., UNAM-Facultad de Ingeniería, Mexico City, Ciudad de México, Mexico
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 January 2018 in Metals
Verified
Journal Article
Open access
PDF file
María del Pilar Aguilar-del ValleMaría del Pilar Aguilar-del Valle
María del Pilar Aguilar-del Valle
HCHéctor De Jesús Cruz-Manjarrez
Héctor De Jesús Cruz-Manjarrez
Arturo Rodríguez-GómezArturo Rodríguez-Gómez
Arturo Rodríguez-Gómez
Currently, aluminum plasmonics face technical challenges for the manufacture of reproducible structures by simple and low-cost techniques. In this work, we used a direct current (DC) sputtering system to grow a set of quasi-spherical aluminum nanoparticles with diameters below 10 nm. Our particles are uniformly distributed over the surface of quartz and nitrocellulose substrates. We review in detail the methodology for the determination of adequate deposition parameters to allow great reproducibility in different production runs. Likewise, we carry out an exhaustive nanostructural characterization by means of scanning and transmission electron microscopy. The latter allowed us to identify that our depositions are nanoparticle monolayers with thicknesses equal to the average particle diameter. Finally, by means of absorbance spectra we identify the presence of a very well-defined plasmonic resonance at 186 nm that is associated with the dipolar mode in particles smaller than 10 nm. Due to the sharpness of their plasmonic resonances as well as their great manufacturing simplicity and high reproducibility, our aluminum nanoparticles could be used as optical sensors.

21 September 2024 in Ceramics
Verified
Journal Article
Open access
PDF file
LGLuis Fernando Garrido García
Luis Fernando Garrido García
Ana Laura Pérez-MartínezAna Laura Pérez-Martínez
Ana Laura Pérez-Martínez
JRJosé Reyes-Gasga
José Reyes-Gasga
María del Pilar Aguilar-del ValleMaría del Pilar Aguilar-del Valle
María del Pilar Aguilar-del Valle
YWYH Wong
YH Wong
Arturo Rodríguez-GómezArturo Rodríguez-Gómez
Arturo Rodríguez-Gómez
Ternary and quaternary compounds offer vast potential for tailoring material properties through compositional adjustments and complex interactions among their constituent elements. However, many of their compositional possibilities still need to be investigated. Energy-dispersive X-ray spectroscopy (EDX) is crucial for determining elemental composition but is inadequate for identifying chemical bonds and physical properties. This work introduces a novel methodology using a stoichiometric deviation vector (SDV) to estimate the physical and compositional feature characteristics of Si, N, and O compounds by comparing actual molar ratios with ideal stoichiometric references. We validated this method by estimating Si-O bonds in silicon oxynitride samples, demonstrating strong agreement with FTIR and refractive index results. We also extended our proof of principle for SiAlON compounds and established an adaptable procedure to analyze compounds with more than three elements. This flexible methodology will significantly value the materials research community, providing valuable compositional features and physical insights by performing elemental EDX characterizations.

6 May 2026 in ACS Materials Au
Verified
Journal Article
Open access
María del Pilar Aguilar-del ValleMaría del Pilar Aguilar-del Valle
María del Pilar Aguilar-del Valle
Ana Laura Pérez-MartínezAna Laura Pérez-Martínez
Ana Laura Pérez-Martínez
ACAngélica Carrillo-Verduzco
Angélica Carrillo-Verduzco
JGJesús Rafael González-Parra
Jesús Rafael González-Parra
ALAlejandra López-Suárez
Alejandra López-Suárez
Arturo Rodríguez-GómezArturo Rodríguez-Gómez
Arturo Rodríguez-Gómez
Developing stable copper-based transparent oxide semiconductors (TOSs) remains a scientific challenge, particularly via scalable processes that enable straightforward tuning of optical absorption, sheet resistance, and carrier type (p- vs n-type). Here we present a simple and reproducible methodology combining direct current (DC) sputtering and a thermal treatment to fabricate n-type copper-oxide TOS thin films. Ultrathin Cu layers deposited at 20 W in air and grown for 2–6 s on fused silica were converted by short-time annealing at 400 °C to single-phase Cu2O, enabling systematic modulation of thickness (39–105 nm) and average transmittance (69–45%, 400–700 nm). XPS confirmed a Cu- and O-dominated surface chemistry with no detectable nitrogen incorporation. The Cu 2p and Auger responses indicated a Cu­(I)-dominated chemical state, while the persistent high-binding-energy O 1s contribution after surface erosion was consistent with oxygen-related defective environments. Under our best-performing condition, the resulting Cu2O TOS exhibited an average transmittance of ∼ 70%, a resistivity of 34.2 Ω·cm, a sheet resistance of 8.76 × 106 Ω/□, and a high-resolution Haacke figure of merit of Φ H–HR = 0.1396, together with a bandgap of 2.2 eV and an electron concentration of 2.3 × 1016 cm–3. Building on our previous report of p-type copper-oxide transparent films (Cryst. Growth Des. 2022), these n-type Cu2O TOSs provide the complementary material platform toward copper-based p–n junction architectures using straightforward processing. Beyond junction-enabled concepts, the results offer a valuable proof of concept for stable n-type Cu2O, with potential applications in defect studies, sensors, and optoelectronic prototypes where moderate transparency and conductivity are acceptable.

12 September 2025 in Nano Express
Verified
Journal Article
Open access
María del Pilar Aguilar-del ValleMaría del Pilar Aguilar-del Valle
María del Pilar Aguilar-del Valle
LGLuis Fernando Garrido García
Luis Fernando Garrido García
Ana Laura Pérez-MartínezAna Laura Pérez-Martínez
Ana Laura Pérez-Martínez
JRJosé Reyes-Gasga
José Reyes-Gasga
Arturo Rodríguez-GómezArturo Rodríguez-Gómez
Arturo Rodríguez-Gómez
In this work, we present a simple, scalable, and reproducible physical strategy to fabricate functional monolayers of sub-10 nm silver nanoparticles (AgNPs) via DC sputtering. Using a 6N-purity Ag target and optimal conditions of 60 W, 1.8 × 10−3 Torr, and 2 s of deposition, we obtained quasi-spherical AgNPs homogeneously distributed over glass and nitrocellulose substrates, with an average Feret diameter of 8.7 ± 4.8 nm and an interparticle spacing of 25% relative to their size. The resulting structures exhibited high morphological reproducibility across multiple deposition cycles, as confirmed by SEM, TEM, HRTEM, and STEM, and showed a sharp and intense localized surface plasmon resonance (LSPR) at 460 nm. I–V measurements revealed an abrupt electrical percolation threshold at 5 s, with current increases exceeding eight orders of magnitude compared to non-conductive samples (≤4 s). Films deposited between 5 and 10 s displayed increasingly steep I–V slopes, indicating reduced electrical resistance due to enhanced particle connectivity, although all percolated samples exhibited electrical breakdown at their respective power dissipation limits (0.17–0.44 W). HRTEM and FFT analyses confirmed the face-centered cubic (FCC) crystal structure of the AgNPs and the presence of a thin Ag2O surface layer. Finally, numerical simulations supported our experimental results, showing that prolonged deposition times promote agglomeration and that larger source-to-substrate distances induce greater angular dispersion, reducing spatial uniformity.

18 November 2021 in Mathematics
Verified
Journal Article
Open access
PDF file
Ana Laura Pérez-MartínezAna Laura Pérez-Martínez
Ana Laura Pérez-Martínez
María del Pilar Aguilar-del ValleMaría del Pilar Aguilar-del Valle
María del Pilar Aguilar-del Valle
Arturo Rodríguez-GómezArturo Rodríguez-Gómez
Arturo Rodríguez-Gómez
For scientists and engineers, the Laplacian operator is a fundamental tool that has made it possible to carry out important frontier studies involving wave propagation, potential theory, heat conduction, the distribution of stresses in a deformable solid and quantum mechanics. Knowing, understanding, and manipulating the Laplacian operator allows us to tackle complex and exciting physics, chemistry, and engineering problems. In this paper, contained in the Special Issue “Mathematics as the M in STEM Education”, we present an instructional derivation of the Laplacian operator in spherical coordinates. Our derivation is self-contained and employs well-known mathematical concepts used in all science, technology, engineering, and mathematics (STEM) disciplines. Our lengthy but straightforward procedure shows that this fundamental tool in mathematics is not intractable but accessible to anyone who studies any of the STEM disciplines. We consider that this work may be helpful for students and teachers who wish to discuss the derivation of this vital tool from an elementary approach in their courses.