Marina Viorela Marcu

Dr. Marina Viorela Marcu

Transilvania University of Brașov, Braşov, Romania
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 May 2018 in Forests
Verified
Journal Article
Open access
PDF file
MCMarius Cheța
Marius Cheța
MMMarina Viorela Marcu
Marina Viorela Marcu
Stelian Alexandru BorzStelian Alexandru Borz
Stelian Alexandru Borz
Motor-manual tree felling and processing (MMTFP) is among the most used options in timber harvesting operations and it is formally known to be a heavy job exposing the workers to safety hazards and harmful factors. Nevertheless, both workload and exposure depend on many operational, organizational, and worker-related parameters. Few studies have evaluated the ergonomics of such operations and fewer have been carried out using an integrated approach able to collect and interpret data for more than one ergonomic parameter. This study evaluated the ergonomic conditions of task-based MMTFP operations in flatland poplar forests by the means of workload, exposure to noise, and risk of musculoskeletal disorders. A fully-automatic approach was used to collect and pair the heart rate and noise exposure data that was complemented by video recording to collect postural data. Workload experienced by the worker was evaluated in terms of heart rate reserve (%HRR), indicating a heavy load during the productive time (%HRR = 46%); exposure to noise was calculated at the task and study level, exceeding (LAeq = 97.15 dB(A); LEX,8h = 96.18 dB(A)) the acceptable limits; and the risk of musculoskeletal disorders was evaluated using the concepts and procedures of the Ovako Working Posture Analysis System, indicating a high postural risk index (PRI = 275), which can cause musculoskeletal disorders (MSD). For more conclusive results, the research should be extended to cover the relevant variability factors.

PSParvaneh Sobhani
Parvaneh Sobhani
Hassan EsmaeilzadehHassan Esmaeilzadeh
Hassan Esmaeilzadeh
Seyed Mohammad Moein SadeghiSeyed Mohammad Moein Sadeghi
Seyed Mohammad Moein Sadeghi
MMMarina Viorela Marcu
Marina Viorela Marcu
Estimating the ecotourism carrying capacity (ETCC) in protected areas (PAs) is essential for minimizing the negative impacts of ecotourism and sustainable environmental management. PAs are one of the prominent ecotourism locations and many of these areas have been created to protect biodiversity and improve human wellbeing. This study has identified and prioritized negative impacts of ecotourism in Lar national park, the Jajrud protected area with the sustainable use of natural resources, and Tangeh Vashi national natural monument. For this purpose, physical carrying capacity (PCC), real carrying capacity (RCC), and effective carrying capacity (ECC) were estimated using the ETCC model. The results indicated that due to these areas’ ecological sensitivity, the most negative impacts of ecotourism are related to the environmental-physical dimensions. In contrast, the lowest impacts have been observed in the economic-institutional dimensions. Moreover, the results revealed that the highest PCC is related to Lar national park, and the lowest PCC is associated with Tangeh Vashi natural monument. There are more tourists in the Jajrud protected area with the sustainable use of natural resources than other areas in RCC and ECC due to low levels of restrictions and legal instructions. In contrast, in Lar national park and Tangeh Vashi natural monument, due to the short duration of ecotourism in these areas (from June to October), high level of restrictions, and ecological sensitivity, the number of tourists is less than the RCC and ECC. As these areas have a limited ability to attract visitors and ecotourism, the protection of these areas requires the implementation of sustainable management to control the negative impacts of ecotourism and estimate the number of visitors.

29 December 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
SESorour Esfandeh
Sorour Esfandeh
ADAfshin Danehkar
Afshin Danehkar
ASAbdolrassoul Salmanmahiny
Abdolrassoul Salmanmahiny
Seyed Mohammad Moein SadeghiSeyed Mohammad Moein Sadeghi
Seyed Mohammad Moein Sadeghi
MMMarina Viorela Marcu
Marina Viorela Marcu
This research is the first literature review of the past three decades’ studies on the effects of urban development and land use/land cover (LULC) change on Iran’s climate change. For this purpose, 67 articles were found, evaluated, and classified according to the spatial and temporal scale, case study, period, data type, climatic factor, methodology, and meteorological data. Moreover, the reviewed literature methodologies were classified according to the purpose, method, and data source. According to the spatial-scale results, national- and city-level studies had the lowest and highest numbers, respectively. Tehran was the most case studies because Tehran is Iran’s capital and the largest metropolitan city. In terms of the temporal scale, studies predicting future changes (urban development and climate change) included 5% of the total literature. Satellite images were the most applied data in the reviewed literature (58%). Overall, 79% of the studies used temperature-related factors to explain the climatic impacts of urban growth and LULC conversion. Spatial modeling with 52% publications was the most used method, while numerical modeling with 12% studies was the least used method. This review showed broad study gaps in applying numerical models, neighborhood scales, urban micro-scale parameters, and long-term projections forecasts due to rapid urban development in Iran compared to the rest of the world. Therefore, our synthesis will assist researchers in facilitating better design for future studies in Iran and similar countries.

21 December 2021 in Land
Verified
Journal Article
Open access
PDF file
PSParvaneh Sobhani
Parvaneh Sobhani
Hassan EsmaeilzadehHassan Esmaeilzadeh
Hassan Esmaeilzadeh
SBShahindokht Barghjelveh
Shahindokht Barghjelveh
Seyed Mohammad Moein SadeghiSeyed Mohammad Moein Sadeghi
Seyed Mohammad Moein Sadeghi
MMMarina Viorela Marcu
Marina Viorela Marcu
The integration and connection of habitats in protected areas (PAs) are essential for the survival of plant and animal species and attaining sustainable development. Investigating the integrity of PAs can be useful in developing connections among patches and decreasing the fragmentation of a habitat. The current study has analyzed spatial and temporal changes to habitat to quantify fragmentation and structural destruction in PAs in Tehran Province, Iran. To achieve this purpose, the trends in land use/land cover (LULC) changes and the quantitative metrics of the landscape ecology approach have been examined. The results revealed that in Lar National Park, low-density pasture has the top increasing trend with 4.2% from 1989 to 2019; in Jajrud PA, built-up has the top increasing trend with 1.5% during the studied years; and among the land uses in TangehVashi Natural Monument, bare land has the top increasing trend with 0.6% from 1989 to 2019. According to the findings, habitat fragmentation and patch numbers have expanded in the studied areas due to the development of economic and physical activities. The results also indicate that the current trend of habitat fragmentation in PAs will have the highest negative impacts, especially in decreasing habitat integrity, changing the structure of patterns and spatial elements, and increasing the edge effect of patches.

30 June 2022 in Forests
Verified
Journal Article
Open access
PDF file
Stelian Alexandru BorzStelian Alexandru Borz
Stelian Alexandru Borz
JTJenny Magaly Morocho Toaza
Jenny Magaly Morocho Toaza
GFGabriel Osei Forkuo
Gabriel Osei Forkuo
MMMarina Viorela Marcu
Marina Viorela Marcu
Wood measurement is an important process in the wood supply chain, which requires advanced solutions to cope with the current challenges. Several general-utility measurement options have become available by the developments in LiDAR or similar-capability sensors and Augmented Reality. This study tests the accuracy of the Measure App developed by Apple, running by integration into Augmented Reality and LiDAR technologies, in estimating the main biometrics of the logs. In a first experiment (E1), an iPhone 12 Pro Max running the Measure App was used to measure the diameter at one end and the length of 267 spruce logs by a free-eye measurement approach, then reference data was obtained by taking conventional measurements on the same logs. In a second experiment (E2), an iPhone 13 Pro Max equipped with the same features was used to measure the diameter at one end and the length of 200 spruce logs by a marking-guided approach, and the reference data was obtained similar to E1. The data were compared by a Bland and Altman analysis which was complemented by the estimation of the mean absolute error (MAE), root mean squared error (RMSE) and normalized root mean square error (NRMSE). In E1, nearly 86% of phone-based log diameter measurements were within ±1 cm compared to the reference data, of which 37% represented a perfect match. Of the phone-based log length measurements, 94% were within ±5 cm compared to the reference data, of which approximately 22% represented a perfect match. MAE, RMSE, and NRMSE of the log diameter and length were of 0.68, 0.96, and 0.02 cm, and of 1.81, 2.55, and 0.10 cm, respectively. Results from E2 were better, with 95% of the phone-based log diameter agreeing within ±1 cm, of which 44% represented a perfect match. As well, 99% of the phone-based length measurements were within ±5 cm, of which approximately 27% were a perfect match. MAE, RMSE, and NRMSE of the log diameter and length were of 0.65, 0.92, and 0.03 cm, and 1.46, 1.93, and 0.04 cm, respectively. The results indicated a high potential of replacing the conventional measurements for non-piled logs of ca. 3 m in length, but the applicability of phone-based measurement could be readily extended to log-end diameter measurement of the piled wood. Further studies could check if the accuracy of measurements would be enhanced by larger samples and if the approach has good replicability. Finding a balance between capability and measurement accuracy by extending the study to longer log lengths, different species and operating conditions would be important to characterize the technical limitations of the tested method.

10 May 2022 in Forests
Verified
Journal Article
Open access
PDF file
PSParvaneh Sobhani
Parvaneh Sobhani
Hassan EsmaeilzadehHassan Esmaeilzadeh
Hassan Esmaeilzadeh
Seyed Mohammad Moein SadeghiSeyed Mohammad Moein Sadeghi
Seyed Mohammad Moein Sadeghi
MMMarina Viorela Marcu
Marina Viorela Marcu
Isabelle D. WolfIsabelle D. Wolf
Isabelle D. Wolf
Ecotourism in protected areas facilitates responsible travel to natural places that conserve the environment, deliver economic benefits to local communities, and offer interpretation and education to visitors. Proper planning and sufficient monitoring of ecotourism sustainability indicators is needed to manage visitor activities in protected areas. Therefore, identifying the major impacts and mitigating them in the early stages of ecotourism development could contribute significantly to the achievement of sustainable development. There is a current gap between the situation in the field and academic contributions to this problem in protected areas of Iran. In the present study, we evaluated ecotourism sustainability levels in four different types of protected areas in Iran, including Lar National Park, Jajrud Protected Area with Sustainable Use of Natural Resource Areas, Tangeh Vashi National Natural Monument, and Kavdeh Wildlife Refuge. We developed a comprehensive list of ecotourism sustainability indicators, including 38 indicators in the environmental–physical dimension, 42 indicators in the demographic–social dimension, and 30 indicators in the economic–institutional dimension. Harnessing local community expertise, we adopted a Delphi approach to determine sustainability levels and factors impacting sustainability. Ecotourism in Lar National Park was most sustainable because of the high levels of restrictions protecting the area and the difficulty in access. Conversely, ecotourism sustainability was lowest at Tangeh Vashi National Natural Monument, which allowed for an uncontrolled influx of visitors. We discuss further factors that impact sustainability, such as population growth, expanding urbanization, an increase in physical and economic activities, and extended annual periods of ecotourism activities. Although the presented ecotourism sustainability indicators are specific to Iran, this study can also be seen to provide a template to plan for sustainable ecotourism in other countries. Altogether, our results suggest conducting a type-by-type analysis of the particular circumstances of various protected areas.