MARTIN Hidalgo-Reyes

Dr. MARTIN Hidalgo-Reyes

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 December 2015 in Botanical Sciences
Verified
Journal Article
Open access
PDF file
MARTIN Hidalgo-ReyesMARTIN Hidalgo-Reyes
MARTIN Hidalgo-Reyes
MCMagdaleno Caballero Caballero
Magdaleno Caballero Caballero
LHLuis Héctor Hernández-Gómez
Luis Héctor Hernández-Gómez
GUGuillermo Manuel Urriolagoitia-Calderon
Guillermo Manuel Urriolagoitia-Calderon
The main aim of this study was to characterize cooked bagasse fibers from Agave angustifolia Haw. The fibers were characterized using scanning electron microscopy, differential scanning calorimetry, thermogravimetric analysis, X-ray Diffraction and chemical analysis. The tensile strength was also tested using fibers with a uniform length (30 mm). The fibers were light brown in color, with a mean diameter and length of 501 ?m and 144 mm, respectively. Scanning electron microscopy images revealed elliptically shaped cells with varying lumen size. Holocellulose content was approximately 82.12 %, and total lignin content was approximately 20.69 %. Due to the crystallinity and lignin content, the fibers proved to be thermo-stable until 220 °C. The mean values of tensile strength, Young’s modulus, % strain (?), and ultimate tensile strength were determined via mechanical tests. The results are comparable to those of other common lignocellulosic fibers, confirming their potential use as a reinforcing element in a polymer matrix to form a new biodegradable composite.

10 October 2022 in Scientia Agropecuaria
Verified
Journal Article
Open access
PDF file
RRRaudel Pérez del Rio
Raudel Pérez del Rio
MARTIN Hidalgo-ReyesMARTIN Hidalgo-Reyes
MARTIN Hidalgo-Reyes
MCMagdaleno Caballero Caballero
Magdaleno Caballero Caballero
LHLuis Héctor Hernández-Gómez
Luis Héctor Hernández-Gómez
A neural network and a genetic algorithm were used in a hybrid method to get the optimal design parameters of an Agave angustifolia Haw. green leaf shredder. First, a prototype of an experimental machine was built using the design parameters recommended by the literature and calculated using linear equations. Then, the shredder prototype was subjected to experiments. The defibration data with different blade adjustments were obtained with experimental values. The data was configured and trained with an artificial neural network to establish a correlation between the defibration quality and the design parameters. The multi-objective optimization method based on genetic algorithms determined the optimal design parameters of the shredder’s functional mechanical elements. The best point was obtained from the least number of broken fibers (2.83%) and the most waste (73.15%). The method used proved suitable to optimize the design parameters; this was based on actual data obtained by experiments performed with the prototype and then modeled through artificial intelligence methods such as neural networks to determine an optimal solution using evolutionary genetic algorithm methods.

6 May 2025 in Agriengineering
Verified
Journal Article
Open access
PDF file
GGGAUDENCIO GRANDE
GAUDENCIO GRANDE
MARTIN Hidalgo-ReyesMARTIN Hidalgo-Reyes
MARTIN Hidalgo-Reyes
PCPedro Cruz
Pedro Cruz
NLNoe Velazquez Lopez
Noe Velazquez Lopez
This study was based on the hypothesis that the hybrid type and its physical–mechanical properties significantly influence the operational efficiency of transplanting systems. Understanding these properties is essential for optimizing the performance of semi-automatic and automatic transplanters. To test this hypothesis, a completely randomized design was implemented to evaluate the physical–mechanical properties of tomato seedlings. A total of 1350 seedlings from three F1 hybrids—Natalie (H1), CID (H2), and Gavilán (H3)—cultivated in central Mexico, were analyzed. The statistical analyses included mean comparisons using Tukey’s test and multiple linear regression to estimate the center of mass (CM). The results indicate that H2 was notable for its total height (ht = 311.76 mm), canopy development in X, Y, and Z axes (170.24 mm, 106.84 mm, and 98.14 mm, respectively), stem diameter (ds = 3.65 mm), total weight (wt = 11.92 g), de (78.36 mm) and dp (233.40 mm) distances, and oscillation period (T = 0.88 s). H1 had the highest stem height (hs = 53.18 mm), wt = 11.76 g, and root ball (RB) moisture content (MC) (77.36%). H3 had the largest ds = 3.70 mm, as well as the highest MC in the stem (94.51%) and the remaining foliage (92.92%). Regarding mechanical properties, the average adhesion force (AF) was 4.606 N (H1), 7.470 N (H2), and 3.815 N (H3). The average root ball punching force (RBPF) was 0.36, 0.48, and 0.25 N, respectively. The lowest static friction coefficient (SFC) on a galvanized steel sheet was 0.936. The drop test (DT) revealed an average residual substrate mass of 0.148 g at a height of 500 mm. It can be concluded that the interaction between hybrid type, transplanting age, and MC plays a critical role in the efficient design of semi-automatic and automatic transplanting equipment. This interaction enables process optimization, ensures operational quality, reduces seedling damage, and ultimately enhances and increases the long-term profitability and sustainability of the equipment.

18 December 2023 in Revista Chapingo Serie Ciencias Forestales y del Ambiente
Verified
Journal Article
Open access
PDF file
JCJorge Colin-Torres
Jorge Colin-Torres
MGMarcos M. González-Peña
Marcos M. González-Peña
MARTIN Hidalgo-ReyesMARTIN Hidalgo-Reyes
MARTIN Hidalgo-Reyes
Artemio Pérez-LópezArtemio Pérez-López
Artemio Pérez-López
Introducción: Los biocompuestos reforzados con fibras naturales son importantes por el aprovechamiento de residuos biodegradables y renovables.Objetivo: Evaluar el desempeño físico-mecánico de un biocompuesto laminar desarrollado con una matriz de polímero epóxica de baja viscosidad, reforzada con fibras de bagazo de Agave angustifolia Haw.Materiales y métodos: Se elaboraron 12 paneles combinando tres contenidos de fibra (18 %, 24 % y 30 %) con cuatro longitudes (1 mm, 3 mm, 6 mm y mezcla). Se realizaron pruebas mecánicas y los resultados se compararon con un patrón (resina pura). En la interfaz fibra-matriz se evaluaron tres tratamientos químicos (bicarbonato de sodio, vinil triethoxy silano e hidróxido de sodio) y su efecto en las propiedades físicomecánicas; además, se evaluó la hibridación con fibra de vidrio.Resultados y discusión: La incorporación de fibra redujo 15.27 % la resistencia última a la tracción y flexión del biocompuesto; sin embargo, incrementaron hasta 1/3 los módulos de tracción y flexión con respecto al patrón. El mejor tratamiento químico (bicarbonato de sodio) incrementó las propiedades mecánicas de las fibras (dureza [46 %] y resistencia a la tracción [6 %] y flexión [24 %]) y la resistencia al impacto (38 %), mientras que la densidad y la resistencia a la humedad disminuyeron 17 % y 11 %, respectivamente. La combinación fibras agave/vidrio incrementó la resistencia a la flexión hasta 77.3 %.Conclusiones: Las fibras de A. angustifolia tienen potencial para implementarlas en la industria, ya que mejoran las propiedades mecánicas del material; además, su uso representaría una alternativa de manejo de los residuos de desecho.

26 March 2025 in Matemáticas, Ingeniería y Ciencias Ambientales
Verified
Journal Article
Open access
PDF file
MÁMaría Victoria Gómez Águila
María Victoria Gómez Águila
XMXinatiuh Flores Mendoza
Xinatiuh Flores Mendoza
MARTIN Hidalgo-ReyesMARTIN Hidalgo-Reyes
MARTIN Hidalgo-Reyes
LSLuis Tonatiuh Castellanos Serrano
Luis Tonatiuh Castellanos Serrano
UMUlises Leonardo Mora Mayáns
Ulises Leonardo Mora Mayáns
El presente trabajo trata sobre el diseño de un prototipo de máquina desmenuzadora de piñas cocidas de agave papalote, destinado a la producción del mezcal para la Unión de Productores de Mezcal Xochicalehualatl de Guerrero, en Chilpancingo Guerrero, México. El propósito del diseño es de mejorar el proceso de martajado en la producción de mezcal. Para cumplirlo se llevó a cabo la investigación, y la observación de los procesos en planta. El diseño se realizó considerando los criterios de seguridad, facilidad de limpieza, tamaño adecuado y productividad. El prototipo diseñado consta de una tolva de alimentación, un eje con barras para introducir las piñas al órgano desmenuzador para reducirlas en trozos pequeños, un canalón de descarga para depositarlas en las tinas de fermentación. La transmisión del movimiento se realiza a través de una transmisión flexible polea-bandas, integrada por tres juegos de poleas. El equipo tiene una productividad de 2.1 toneladas por hora, con capacidad de procesar las piñas sin necesidad de seccionarlas, reduciendo el tiempo de trabajo en un 60 por ciento, y con la posibilidad de utilizarse en o Este trabajo presenta el diseño de un prototipo de máquina desmenuzadora de piñas cocidas de agave papalote, creado específicamente para optimizar la producción de mezcal en la Unión de Productores de Mezcal Xochicalehualatl en Chilpancingo, ubicado en el Estado de Guerrero, México. El objetivo principal del diseño es mejorar el proceso de martajado, fundamental en la elaboración del mezcal. El prototipo consta de una tolva de alimentación, eje con barras que facilita la introducción de las piñas al mecanismo desmenuzador, y al canalón de descarga que permite depositar los trozos en las tinas de fermentación. La transmisión de movimiento se efectúa mediante un sistema flexible de poleas y bandas, compuesto por tres juegos de poleas, con productividad de 2.1 toneladas por hora, permitiendo procesar las piñas sin necesidad de cortarlas previamente, reduciendo el tiempo de trabajo en un 60% la producción de bebidas alcohólicas. El diseño presentado, cumple con los requerimientos de trabajos planteados, y humaniza el trabajo de los operadores.