Masih Zolghadr

Dr. Masih Zolghadr

Jahrom University, Jahrom, Fārs, Iran
orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 October 2022 in Water
Verified
Journal Article
Open access
PDF file
MZMasih Zolghadr
Masih Zolghadr
MRMohammad Rafie Rafiee
Mohammad Rafie Rafiee
FEFatemeh Esmaeilmanesh
Fatemeh Esmaeilmanesh
AFAbazar Fathi
Abazar Fathi
RTRavi Prakash Tripathi
Ravi Prakash Tripathi
Hazi Mohammad AzamathullaHazi Mohammad Azamathulla
Hazi Mohammad Azamathulla
Time of concentration (TC) is a parameter in runoff estimation, used to study and design different types of projects in watersheds. Any error in TC calculation leads to an inaccurate estimation of the design flow, which can lead to over-sizing or under-sizing of designed facilities that can have great economic and environmental consequences. Therefore, choosing the correct method to estimate TC is of great importance. Due to the diversity of estimation methods in the literature, the obtained TC values are different. This study aims to present a new method to calculate TC, based on its main concept, i.e., the time required for a water parcel to reach its outlet from the farthest hydrological point of a watershed. A two-dimensional hydraulic simulation was used to model the water parcel travel. A watershed was selected as a case study, and its time of concentration was determined by salt solution tracing. The field measurement results were used for calibration of the numerical simulation model. Meanwhile, 31 empirical relations in the literature were reviewed to determine the most accurate ones. Estimated TC values were compared with the measured ones, and the relative error percentage was used to evaluate the accuracy of the result. In the empirical TC methods, the maximum error was above 300%, and the minimum error was 6.7% for the field studied area. The relative errors of hydraulic simulation outputs were between 3 and 27%. The results showed that only three empirical methods, namely Simas and Hawkins, SCSlag, and Yen and Chow, had the least errors respectively equal to 6.7%, 8.660%, and 13.5%, which can be recommended for the studied area and those with similar hydrological characteristics. On the other hand, hydraulic simulation is also introduced as an efficient method to determine TC which can be used in any desired watershed.

21 January 2023 in Fluids
Verified
Journal Article
Open access
PDF file
AFAbazar Fathi
Abazar Fathi
SZSeyed Mohammad Ali Zomorodian
Seyed Mohammad Ali Zomorodian
MZMasih Zolghadr
Masih Zolghadr
ACAaron Anil Chadee
Aaron Anil Chadee
Yee-Meng ChiewYee-Meng Chiew
Yee-Meng Chiew
Hector MartinHector Martin
Hector Martin
Scour is one of the main causes of hydraulic structural failures. The present experimental study examines the use of riprap, submerged vanes, and a combination of these for scour reduction around vertical walls and spill-through abutments under clear-water conditions. Specifically, the influence of placing riprap stones with different apron shapes (geometry) and/or a group of submerged vanes of constant height and length on abutment scour was examined. The main aim is to propose the optimum apron geometry and placement of submerged vanes to (1) reduce edge failure at vertical walls and spill-through abutments; and (2) prevent shear failure at the spill-through abutment (no shear failure is observed around the vertical wall abutment). The results show that using ripraps for scour protection is more effective than submerged vanes. However, the highest reduction in scour depth was achieved when a combination of riprap and submerged vanes was used together. This arrangement can reduce the maximum clear-water scour depth by up to 54% and 39% with vertical walls and spill-through abutments, respectively. Furthermore, selecting appropriate apron scale ratios reduces the required riprap volume by up to 46% and 31% for the vertical wall and spill-through abutment, respectively. In addition, the installation of vanes increased the riprap stability and reduced edge failure in both abutments tested. Finally, using riprap aprons with proper scales ratios at the downstream side of the spill-through abutment also prevents shear failure in this zone.

6 May 2024 in Polymers
Verified
Journal Article
Open access
PDF file
PBPouyan Bagheri
Pouyan Bagheri
Ivan GratchevIvan Gratchev
Ivan Gratchev
MZMasih Zolghadr
Masih Zolghadr
SSSu-Won Son
Su-Won Son
JKJin Man Kim
Jin Man Kim
Human activities have had a profound impact on the environment, particularly in relation to surface erosion and landslides. These processes, which are natural phenomena, have been exacerbated by human actions, leading to detrimental consequences for ecosystems, communities, and the overall health of the planet. The use of lignin (LIG) as a biopolymer soil additive material is regarded as an eco-friendly solution against soil erosion and slope failure which holds immense promise. However, significant research gaps currently hinder a comprehensive understanding of its mechanisms and effectiveness. Experimental studies offer a robust platform to address these gaps by providing controlled conditions for assessing soil stability, exploring mechanisms, and evaluating adaptability. Bridging these research gaps will contribute to the development of innovative and sustainable strategies for mitigating soil erosion and preventing slope failure, thereby promoting environmental resilience and resource conservation. This study aimed to investigate the effect of the LIG biopolymer on mitigation of soil erosion, slope failure and the enhancement of soil strength by conducting laboratory tests (UU triaxial, unconfined compressive strength (UCS), and soaking) as well as flume experiments under uniform rainfall events. The alterations in the engineering characteristics and erosion resistance of silty soil mixed with a LIG additive at concentrations of 1% and 3.0% by weight have been examined. The results show that the LIG-treated samples demonstrated an enhanced resistance to surface erosion and an enhanced prevention of slope failure, as well as improved shear stress, cohesion, stiffness, and resistance to water infiltration.

5 June 2023 in Fluids
Verified
Journal Article
Open access
PDF file
MZMasih Zolghadr
Masih Zolghadr
SZSeyed Mohammad Ali Zomorodian
Seyed Mohammad Ali Zomorodian
AFAbazar Fathi
Abazar Fathi
RTRavi Prakash Tripathi
Ravi Prakash Tripathi
NJNeda Jafari
Neda Jafari
Hazi Mohammad AzamathullaHazi Mohammad Azamathulla
Hazi Mohammad Azamathulla
The causes of many bridge failures have been reported to be local scour around abutments. This study examines roughening elements as devices with which to intercept the downflow responsible for the formation of the principal vortex, which is what triggers local scour around abutments. Two vertical wall abutments with different widths were examined under four different hydraulic conditions in a clear-water regime. Elements with different thicknesses (t) and protrusions (P) with the same dimensions, (P = t = 0.05 L, 0.1 L, 0.2 L, and 0.3 L, where L is the length of the abutment) and with varying depths of installation (Z) were considered. Elements were installed in two positions: between the sediment surface and water elevation and buried within the sediment. To determine the optimum depth of installation, one element was first installed on the sediment surface, and the number of elements was increased in each subsequent test. The results show that installing elements between water surface elevation and the sediment’s initial level did not show any defined trend on scour depth reduction. However, the optimum installation depth of the elements is 0.6–0.8 L below the initial bed level. Moreover, the roughening elements with thickness and protrusion of P = t = 0.2 L resulted in the most effective protection of the foundation. The best arrangement, (P = t = 0.2 L and Z = >0.6–0.8 L) reduced the maximum scour depth by up to 30.4% and 32.8% for the abutment with smaller and larger widths, respectively.

28 February 2020 in International Journal of River Basin Management
Verified
Journal Article
Closed access
MZMasih Zolghadr
Masih Zolghadr
MBmahmood shafai bejestan
mahmood shafai bejestan
Previous research studies have shown that abutment scour makes a major contribution in bridge failures. Protecting bridges against scour is therefore a priority need. For existing bridges, armoring methods, such as riprap, have a wide application. In the areas where providing stones is expensive, concrete blocks or similar techniques are often used. In the present study the application of the Six Legged Concrete (SLC) elements was experimentally investigated. The SLC elements were placed in three different densities (open, medium and dense) at three different placement depths (h/l=0, 0.5 and 1; where h is the element installation height above the bed and l is element height). Each alternative was tested under different flow conditions for a wing-wall abutment. In general, the results showed that the SLC elements can considerably reduce the scour under different flow conditions. In an optimal arrangement, the elements reduced the scour depth at abutment nose up to 100%. The maximum reduction of scour depth was obtained when the SLC elements were placed densely on the bed (h/l=1).

18 March 2024 in Journal of Water and Climate Change
Verified
Journal Article
Open access
PDF file
MRMohammad Rafie Rafiee
Mohammad Rafie Rafiee
SRSattar Rad
Sattar Rad
MMMehdi Mahbod
Mehdi Mahbod
MZMasih Zolghadr
Masih Zolghadr
RTRavi Prakash Tripathi
Ravi Prakash Tripathi
HAH. Md. Azamatulla
H. Md. Azamatulla
Precipitation is hard to access in countries like Iran, due to inadequate number of rain gauge stations. Remote sensing provides an alternative source of rainfall estimation. In this study, the effectiveness of the HEC-HMS model was evaluated using GPM (Global Precipitation Measurement Mission) satellite and rain gauge station data. The model was calibrated and validated using 5 flood events' data of a hydrometric station at the outlet of Bashar basin. Important flood parameters including peak discharge (QP), flood volume (V) and time of concentration (TC) were used to evaluate and compare the application of satellite and ground station data in the model, using various statistical indices. The accuracy of QP and V estimations using rain gauge data was higher than those obtained by satellite data. However, the difference between mean relative error (MRE) in QP estimation was about 1% (9.9% and 10.6% for rain gauge and satellite data, respectively). Conversely, higher accuracies were met for TC estimation using satellite (with MRE 9.1% and 10.2% for GPM and rain gauge data, respectively). Such results imply the sole utilization of satellite precipitation data is reliable for modeling hydrological key parameters, which can be helpful in areas with limited ground station coverage.