Foodborne safety has aroused tremendous research interest in recent years because of a global public health problem. The rapid and precise detection of foodborne pathogens can reduce significantly infection diseases and save lives by the early initiation of an effective treatment. This review highlights current advances in the development of biosensors for detection of Campylobacter spp. and Listeria monocytogenes that are the most common causes of zoonosis. The consumption of pathogen contaminated food is responsible for humans hospitalization and death. The attention focused on the recognition elements such as antibodies (Ab), DNA probes and aptamers able to recognize cells, amplicons, and specific genes from different samples like bacteria, food, environment and clinical samples. Moreover, the review focused on two main signal-transducing mechanisms, i.e., electrochemical, measuring an amperometric, potentiometric and impedimetric signal; and optical, measuring a light signal by OLED (Organic Light Emitting Diode), SPR (Surface Plasmon Resonance), and Optical fiber. We expect that high-performance of devices being developed through basic research will find extensive applications in environmental monitoring, biomedical diagnostics, and food safety.

Residual feed intake (RFI), a widespread index used to measure animal feed efficiency, is influenced by various individual biological factors related to inter-animal variation that need to be assessed. Herein, 30 Simmental bulls, raised under the same farm conditions, were divided on the basis of RFI values into a high efficient group (HE, RFI = - 1.18 ± 0.33 kg DM/d, n = 15) and a low efficient group (LE, RFI = 0.92 ± 0.35 kg DM/d, n = 15). Subsequently, bulls were slaughtered at an average BW of 734 ± 39.4 kg. Their ruminal fermentation traits were analysed immediately after slaughtering and after 24 h of in vitro incubation. Furthermore, ruminal micro-biota composition and ruminal papillae morphology were examined. The LE group exhibited a higher propionate concentration as a percentage of total volatile fatty acids (17.3 vs 16.1%, P = 0.04) in the rumen fluid collected during slaughtering, which was also confirmed after in vitro fermentation (16.6 vs 15.4% respectively for LE and HE, P = 0.01). This phenomenon resulted in a significant alteration in the acetate-to-propionate ratio (A:P) with higher values for the HE group, both after slaughter (4.01 vs 3.66, P = 0.02) and after in vitro incubation (3.78 vs 3.66, P = 0.02). Methane production was similar in both groups either as absolute production (227 vs 218 mL for HE and LE, respectively) or expressed as a percentage of total gas (approximately 22%). Even if significant differences (P < 0.20) in the relative abundance of some bacterial genera were observed for the two RFI groups, no significant variations were observed in the alpha (Shannon index) and beta (Bray-Curtis index) diversity. Considering the papillae morphology, the LE subjects have shown higher length values (6.26 vs 4.90 mm, P < 0.01) while HE subjects have demonstrated higher papillae density (46.4 vs 40.5 n/cm², P = 0.02). Histo-morphometric analysis did not reveal appreciable modifications in the total papilla thickness, boundaries or surface between the experimental groups. In conclusion, our results contribute to efforts to analyse the factors affecting feed efficiency at the ruminal level. Propionate production, papillae morphology and a few bacterial genera certainly play a role in this regard, although not a decisive one.

A new rumen batch fermentation system that allows continuous measures of total gas (GP) and methane production (MP) was tested. The fermentation system is composed of glass bottles connected to gas counters (Ritter Apparatebau GmbH & Co. KG) and an infrared gas analyser that measures the methane concentration. The system allows direct and continuous measurement of GP and MP for accurate kinetic studies. The aim of the work was to test the rumen fermentation system and compare the GP and MP kinetics obtained. Barley meal (BM), alfalfa hay (AH), corn silage (CS), and soya bean hulls (SH) were used as substrates in four consecutive fermentation runs. Cumulative volumes of GP and MP and the percentage of methane on total GP were recorded continuously until 48 h and average values at 1 h intervals were fitted with an exponential model with a lag phase reaching a good fit (R² > 0.992). GP and MP reached the highest plateau levels for SH (1836 and 370 ml, respectively; p < 0.01) and the lowest for AH (1000 and 233 ml, respectively). The remaining substrates showed intermediate values. MP kinetics showed a discrete lag phase (from 0.09 to 1.12 h), whereas it was equal to zero for the total GP (except for SH). The methane concentration in gas flowing increased rapidly at the beginning of fermentation (from 0.35 to 0.95 h⁻¹) and reached a plateau after approximately 8–12 h. In conclusion, the rumen fermentation system evaluated generates methane data comparable to those reported in the literature and allows simple continuous measurement of methane release throughout fermentation.

This study simulates in vitro the effects of (i) rumen acidity and (ii) change in rumen protozoa numbers on the recovery of aflatoxins (AFs). Two 24‐h fermentation experiments were carried out using the same batch in vitro fermentation systems and substrate (dried corn meal) containing 11.42, 2.42, 7.65 and 1.70 µg/kg of AFB1, AFB2, AFG1 and AFG2 respectively. In Experiment 1, two buffer concentrations (normal salts dosage or lowered to 25%) were tested. Buffer reduction decreased gas production (730 vs. 1101 mL, p < 0.05), volatile fatty acids (VFA) and NH₃ concentrations in the fermentation liquid (39.8 vs. 46.3 mmol/L, and 31.7 vs. 46.5 mg/dL respectively, p < 0.01). Recovery of all four AFs types was higher (p < 0.01) in the reduced buffer fermentation fluid, both as a percentage of total AF incubated (73.6% vs. 62.5%, 45.9% vs. 38.1%, 33.6% vs. 17.9% and 18.9% vs. 6.24% for AFB1, AFB2, AFG1 and AFG2 respectively) and as amounts relative to VFA production (163.4 vs. 123.5, 22.1 vs. 15.7, 48.8 vs. 22.5 and 6.16 vs. 1.86 ng/100 mmol of VFA, for AFB1, AFB2, AFG1 and AFG2 respectively). In Experiment 2, Stevia rebaudiana Bertoni extracts (S) or a Camphor essential oil (Cam) were added to fermenters and compared to the control (no additives, C). S and Cam addition resulted in a 25% reduction (p < 0.05) and a 15% increase (p < 0.05) in protozoa counts respectively, when compared to C. Both plant additives slightly reduced (p < 0.05) AFB1 recovery as a percentage of total AFB1 incubated (68.5% and 67.7% vs. 74.9% for S, Cam and C respectively). Recoveries of all other AFs were unaffected by the additives. In conclusion, the rumen in vitro AFB1 recovery (63%–75%) was higher than other AFs (3%–46%) and the acidic fermentation environment increased it. In our conditions, changes in protozoa numbers did not affect AFs recovery.

The present study aimed to assess the dynamics of rumen methane (CH₄) production following the addition of NaNO_3. This was done using an in vitro rumen fermentation system that ensures continuous gas and methane assessments. Four different levels of NaNO₃ were used to get the final nitrate concentrations of 0.5, 1.0, 1.5, and 2.0 mg/ml of rumen fluid. For each dose, corresponding controls contained sodium chloride and urea were realised to ensure comparable levels of sodium and nitrogen. The addition of nitrates had slight effect on the intensity of fermentation because the total gas produced minus CH₄ (total methane-free gas) only went down at the highest dose (2.0 mg/ml), and the final concentrations of SCFA were the same at all doses. The most evident effect was a modification of the SCFA profile (low concentrations of propionate and valerate, progressive increments of acetate, and decreases of butyrate) and a reduction in overall CH₄ production. The CH₄ yield for the 0.5 mg/ml dose was not different from control in the entire fermentation. Yield of the 1.0 mg/ml dose was significantly lower than the control group (p < 0.05) only within the initial 24-h period, and higher dosages (1.5 and 2.0 mg/ml) were lower during the entire fermentation (p < 0.01). Methane yields were well fitted with the Gompertz model, but only the highest level of nitrate inclusion had a significant impact on the majority of model parameters (p < 0.01). The linear regressions between CH₄ yields (y) and the amounts of nitrates (x) at progressive fermentation durations (e.g. 6, 12, 24, and 48 h) produced equations with increasing absolute slopes (from -0.069 to -0.517 ml/mg of nitrate). Therefore, nitrate reduced rumen CH₄ yield in a dose-dependent manner: the impact of low doses was primarily observed at the initial stages of fermentation, whereas high doses exhibited effectiveness throughout the entire fermentation process. In conclusion, in batch fermentation systems, the dose effect of nitrates on methane yield was time dependent.