The field of simulation and optimisation of dynamic mixing elements (‘mixers’) is lacking good methods for spatially resolved validation and flow visualisation. For this reason, the authors present an experimental setup that gives better insight into the thermal, distributive and dispersive mixing process by measuring melt temperatures upstream of the mixer and injecting a secondary, visually distinguishable stream of melt upstream. Running extrusion trials for a polyethylene on both a rhomboidal and a Maddock mixer, temperatures, gray scale distribution of images of extrudates and size of dispersed domains in incompatible polystyrene were measured. It was found that temperatures upstream and downstream of the mixer can be quantified. This was used to validate a simulation of thermal mixing. In distributive mixing, good agreement with simulation and an excellent spatial resolution were observed, thereby identifying an area of the rhomboidal mixer in need of geometric improvement. For dispersive mixing, a trend coherent with extrusion theory was found.