Roknujjaman Md

Dr. Roknujjaman Md

Mechanical and Aerospace Enggineering, Clarkson University, Potsdam, New York, USA
orcid
Postdoctoral Research Scientist

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2023 in Physics of Fluids
Verified
Journal Article
Open access
PDF file
RMRoknujjaman Md
Roknujjaman Md
HKHarumichi Kyotoh
Harumichi Kyotoh
YAYohei Asada
Yohei Asada
AYAdachi Yasuhisa
Adachi Yasuhisa
The objective of this study was to comprehensively examine the pulsatile flow behavior within an elastic tube using experimental and theoretical approaches. This work is an extension of our earlier report [Roknujjaman et al., Phys. Fluids, 34, 123612 (2022)]. In this paper, we adapted a quasi-one-dimensional model to elucidate the wave propagation and pulse attenuation phenomena in an elastic tube and compared with experimental findings. According to our investigation, the key findings were as follows: the experimental and predicted flow wave propagation trend agreed well. Additionally, because of the silicon tubes greater deformation than the urethane tubes, the pulsation was decreased farther in the silicon tubes than in the urethane ones. Furthermore, because of the reflected wave near the tube exit, the pulsations amplitude significantly increased, but it did not enlarge when the resistance was installed at the exit. Finally, we infer that the quasi-one-dimensional model is a better fit for experimental results compared to the two-dimensional model.

14 July 2022 in Journal of Fluid Mechanics
Verified
Journal Article
Closed access
PDF file
HKHarumichi Kyotoh
Harumichi Kyotoh
GSGenki Sekine
Genki Sekine
RMRoknujjaman Md
Roknujjaman Md
The propagation speed, shape and stability of the rim generated by a liquid-curtain breakup are studied. In the experiment, a liquid curtain surrounded by a slot die, edge guides and the surface of a roller breaks at the contact point between the edge guide and roller in a low-Weber-number range, and the rim propagates in the horizontal direction. Except for the initial time, the rim is almost straight and has a nearly constant propagation speed. For an Ohnesorge number much smaller than 1, unevenness occurs on the rim and the droplets separate from it. When the Ohnesorge number is of the order of unity, the rim becomes convex vertically downward, and the liquid lump flows down. The shape, propagation speed and surface stability of the rim are discussed by analysing the equation proposed by Entov & Yarin (J. Fluid Mech., vol. 140, 1984, pp. 91–111). It is shown that the volume flow rate condition at the slot die exit is important to explain the propagation of the rim. Additionally, in the initial stage of the curtain breakup, the Plateau–Rayleigh instability causes unevenness on the rim surface, and after the rim reaches the slot die exit, the Rayleigh–Taylor instability generates a liquid lump on the rim, which grows into droplets when the Ohnesorge number is much less than 1.

1 December 2022 in Physics of Fluids
Verified
Journal Article
Closed access
PDF file
RMRoknujjaman Md
Roknujjaman Md
GSGenki Sekine
Genki Sekine
HKHarumichi Kyotoh
Harumichi Kyotoh
In this research, the flow wave propagation, speed, and pulsation suppression in an elastic tube were studied using a diaphragm pump. The flow fluctuations with shocking pressure fluctuations occur in the elastic tube because the check ball was blocked, thereby preventing reverse flow. Consequently, the check ball is one of the causes of pulsating flows in diaphragm pumps. However, only a few studies have analyzed the relationship among the check ball movement, pressure, and flow fluctuations. In this study, we constructed several elastic tube experiments: (i) single-tube model; (ii) two-tube model. To predict the flow wave propagation and pulsation in an elastic tube, we developed an axisymmetric theoretical model and compared into the experimental results. Based on our study, the main results were as follows: the relationship among the check ball movement, pressure, and flow fluctuations showed that the pressure and flow rate pulsation were caused by the asymmetry of the check ball movement. Additionally, we observed that the theoretical flow wave propagation trend had a good agreement with the experimental results, although the flow wave speed in the urethane-tube experiment differed considerably from the theoretical prediction. Furthermore, the amplitude of the pulsation increased considerably owing to the reflected wave at the tube exit, although it did not increase when the resistance was added at the exit. Finally, we observed that the pulsation reduced more in the silicon tubes compared to the urethane tubes because the deformation of the silicon tubes was larger than that of the urethane tubes.

12 February 2018 in American Journal of Applied Mathematics
Verified
Journal Article
Open access
PDF file
RMRoknujjaman Md
Roknujjaman Md
MAMohammad Asaduzzaman
Mohammad Asaduzzaman
In this paper we used the method of lines (MOL) as a solution procedure for solving partial differential equation (PDE). The range of applications of the MOL has increased dramatically in the last few years; nevertheless, there is no introductory to initiate a beginner to the method. This Paper illustrates the application of the MOL using Crank-Nicholson method (CNM) for numerical solution of PDE together with initial condition and Dirichlet’s Boundary Condition. The implementation of this solutions is done using Microsoft office excel worksheet or spreadsheet, Matlab programming language. Finally, here we analysis the particular solution and numerical solution of Laplace equation obtained by MOL along with CNM.

30 January 2024 in Processes
Verified
Journal Article
Open access
PDF file
RMRoknujjaman Md
Roknujjaman Md
KYKeisuke Yoshida
Keisuke Yoshida
MGMuhamad Ezral Bin Ghazali
Muhamad Ezral Bin Ghazali
JLJiawei Li
Jiawei Li
HKHarumichi Kyotoh
Harumichi Kyotoh
YAYohei Asada
Yohei Asada
The sedimentation of flocs in aquatic environments is a fundamental phenomenon that has not yet been fully elucidated. This study quantitatively examines sedimentation behavior, particularly focusing on sedimentation turbulence, in a two-dimensional system between flat plates, utilizing image analysis. Experiments were conducted in a rectangular container with montmorillonite suspensions coagulated in a sodium chloride solution. The settling motion of flocs was visualized using a green laser from above and captured horizontally with a digital camera. The study employed Particle Image Velocimetry (PIV) to analyze the velocity field in floc sedimentation, using the flocs as tracers to calculate the mean velocity at the sediment–supernatant interface. The results showed that the mean PIV value is affected by rising particles caused by sedimentation turbulence, indicating that PIV analysis of flow fields using flocs as tracers is reliable. The maximum settling velocity was found to increase with the initial interface height and the thickness of the container. The study further notes that flow velocity fluctuations increase during rapid sedimentation, marked by repeated collisions, separation, and the flocculation of variably sized flocs, offering a clear explanation of sedimentation turbulence. Additionally, Fourier analysis of vertical spectra in the container reflects the formation and collapse of flocs.

19 January 2018 in International Journal of Applied Mathematics and Theoretical Physics
Verified
Journal Article
Open access
PDF file
RKRonju Khatun
Ronju Khatun
RMRoknujjaman Md
Roknujjaman Md
MMMohammad Abdul Al Mohit
Mohammad Abdul Al Mohit
In this paper, investigate a two dimensional unsteady Magneto hydro dynamics (MHD) free convection flow of viscous incompressible and electrically conducting fluid flow past an vertical plate in the presence of Grashof Number, Modified Grashof Number, Prandtl Number, Schamidt Number as well as Dufour effects. The governing equations of the problem contain a system of non-linear partial differential equations; have been transformed into a set of coupled non-linear ordinary differential equations which is solved numerically by applying well known explicit finite difference method. The Finite-difference method is an enormously used technique to investigate of the general non linear partial differential equation. Partial differential equations occur in many branches of applied mathematics for example, in hydrodynamics, elasticity, quantum mechanics. Hence, the proposed study is to investigate the numerical results which are performed for various physical parameters such as velocity profiles, temperature distribution and concentration profiles within the boundary layer are separately discussed in graphically.