Meizhao Han

Dr. Meizhao Han

Department of Civil Engineering, Harbin Institute of Technology Weihai, Weihai, Shandong, China
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 August 2018 in Journal of Materials in Civil Engineering
Verified
Journal Article
Closed access
FZFenglei Zhang
Fenglei Zhang
JLJing Li
Jing Li
MYMuhammad Yaseen
Muhammad Yaseen
Meizhao HanMeizhao Han
Meizhao Han
YYYuhua Yin
Yuhua Yin
SYSong Yang
Song Yang
In this study, two types of modified asphalts were prepared via two different approaches, using as modifiers waste rubber and plastic and other raw materials. One approach followed a two-step mechanism of melting-blending thermal plastic elastomers (TPE) with the raw materials, which included waste rubber powder, plastic, styrene-butadiene-styrene, and plasticizer. The second approach involved the direct mixing of asphalt with the mixture of raw materials in a single step. From a comparison of the microperformance and macroperformance indices of the modified asphalts, it was found that the high-temperature preparation for the TPE polymer alloy–modified asphalt resulted in the relatively high aging of the modifying material, leading to poor performance. The asphalt prepared via the compound-modified approach exhibited better performance indices and distribution of the modifier in the base asphalt. The modified asphalt samples were characterized by atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FT-IR) and fluorescence microscopy (FM) techniques, which helped in the interpretation of the experimental data, textural characterization, and preparation techniques (melt-blending and direct mixing). The present approach could be deemed helpful in improving and optimizing the existing methods of rubber–plastic alloy-modified asphalt preparation, the specific quantities of the modifiers, and the modification parameters used in the asphalt-modifying industries, in order to achieve the best performance that meets market demands.

13 November 2018 in Polymers
Verified
Journal Article
Open access
PDF file
JLJing Li
Jing Li
Meizhao HanMeizhao Han
Meizhao Han
MYMuhammad Yaseen
Muhammad Yaseen
LYLiu Yu
Liu Yu
ZSZhibin Su
Zhibin Su
SDShaochan Duan
Shaochan Duan
Styrene-butadiene styrene graphene oxide nanoplatelets (SBS-g-GOs)-modified asphalt was prepared by reacting thiolated GOs (GOs-SH) with SBS in asphalt using a thiol-ene click reaction. The temperature resistance and mechanical properties of asphalts were analyzed by dynamic shear rheology (DSR) and multiple-stress creep-recovery (MSCR) tests, which revealed that an optimum amount of GOs-SH (0.02%) can effectively improve the low temperature and anti-rutting performance of SBS asphalt. Segregation experiments showed that SBS-g-GOs possessed good stability and dispersion in base asphalt. Fluorescence microscopy results revealed that the addition of GOs-SH promoted the formation of SBS network structure. Textural and morphological characterization of GOs-SH and SBS were achieved by Fourier transform infra-red (FT-IR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX), atomic-force microscopy (AFM), X-ray diffraction (XRD), and scanning electron microscopy (SEM), while surface chemical composition was tested by X-ray photoelectron spectroscopy (XPS). Based on textural characterization data, a suitable reaction mechanism was proposed that involved the preferential reaction between GOs-SH and 1,2 C=C of SBS. The currently designed GOs-SH incorporated asphalt via thiol-ene click reaction provides new ideas for the preparation of modified asphalt with enhanced mechanical properties for target-oriented applications.

11 April 2019 in Polymers
Verified
Journal Article
Open access
PDF file
Meizhao HanMeizhao Han
Meizhao Han
XZXiang Zeng
Xiang Zeng
MYMuhammad Yaseen
Muhammad Yaseen
JLJing Li
Jing Li
JYJing Yang
Jing Yang
FMFei Meng
Fei Meng
Through a covalent grafting reaction, octadecyl amine (ODA) was grafted on the surface of waste rubber powder (WRP) to obtain an ODA-WRP modifier, which was in turn compounded with a styrene-butadiene-styrene block copolymer (SBS) to prepare ODA-WRP/SBS-modified asphalt. The three major indicators (i.e., dynamic shear rheometer (DSR), multi-stress creep recovery (MSCR), and separation tests) showed that 1-ODA-WRP effectively improved the complex shear modulus (G*), elastic Modulus (G′), and loss modulus (G″) by 36.47%, 40.57%, and 34.77% (64 °C and 10 Hz), respectively, as compared to pristine SBS-modified asphalt. Fluorescence microscopy (FM) results concluded that the enhancement in mechanical properties was accredited to the better compatibility of various components in asphalt and establishment of network structure between ODA-WRP and SBS in ODA-WRP/SBS-modified asphalt. Fourier infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) analyses confirmed the successful synthesis of ODA-WRP. This study could be of great help in synthesizing ODA-WRP asphalt modified with SBS for highways and construction applications.


11 December 2023 in Science of The Total Environment
Verified
Journal Article
Closed access
FZFuliao Zou
Fuliao Zou
ZLZhen Leng
Zhen Leng
ZTZhifei Tan
Zhifei Tan
DLDanning Li
Danning Li
Meizhao HanMeizhao Han
Meizhao Han
ASAnand Sreeram
Anand Sreeram

8 October 2022 in Construction and Building Materials
Verified
Journal Article
Closed access
YWYing-Yuan Wang
Ying-Yuan Wang
Yiqiu TanYiqiu Tan
Yiqiu Tan
HLHui-Jie Lv
Hui-Jie Lv
Meizhao HanMeizhao Han
Meizhao Han