Styrene-butadiene styrene graphene oxide nanoplatelets (SBS-g-GOs)-modified asphalt was prepared by reacting thiolated GOs (GOs-SH) with SBS in asphalt using a thiol-ene click reaction. The temperature resistance and mechanical properties of asphalts were analyzed by dynamic shear rheology (DSR) and multiple-stress creep-recovery (MSCR) tests, which revealed that an optimum amount of GOs-SH (0.02%) can effectively improve the low temperature and anti-rutting performance of SBS asphalt. Segregation experiments showed that SBS-g-GOs possessed good stability and dispersion in base asphalt. Fluorescence microscopy results revealed that the addition of GOs-SH promoted the formation of SBS network structure. Textural and morphological characterization of GOs-SH and SBS were achieved by Fourier transform infra-red (FT-IR) spectroscopy, energy-dispersive X-ray spectroscopy (EDX), atomic-force microscopy (AFM), X-ray diffraction (XRD), and scanning electron microscopy (SEM), while surface chemical composition was tested by X-ray photoelectron spectroscopy (XPS). Based on textural characterization data, a suitable reaction mechanism was proposed that involved the preferential reaction between GOs-SH and 1,2 C=C of SBS. The currently designed GOs-SH incorporated asphalt via thiol-ene click reaction provides new ideas for the preparation of modified asphalt with enhanced mechanical properties for target-oriented applications.
Salts can have detrimental effects on asphalt pavements, leading to permanent damage that compromises their durability and sustainability. This study investigates the damage mechanisms of asphalt pavements under coupled salt–thermal–mechanical effects using multi-scale modeling. Pull-off and semicircular bending (SCB) tests were conducted to determine material parameters and validate numerical models. Experimental data demonstrated that after 48 h of salt treatment at −10 °C, specimens exhibited reductions in cohesive strength ranging from 23.5% to 26% and adhesive strength decreasing by 25% to 44% compared to untreated controls. More severe degradation was observed at 0 °C, with cohesive strength diminishing by up to 63.8% and adhesive strength declining by up to 71.6%. A multi-scale finite element (FE) pavement model incorporating cohesive zone modeling (CZM) was developed to simulate damage behavior within asphalt concrete. Salt diffusion analysis revealed limited penetration depth within short exposure periods, and results showed that salt penetration reached only about 10 mm into the pavement layers after 48 h. Results indicated significant reductions in adhesive and cohesive strengths due to salt exposure, with damage susceptibility increasing under combined thermal fluctuations and mechanical loading. Additionally, the effects of moving load magnitude and speed on pavement damage were examined, showing higher damage accumulation at lower speeds and heavier loads. This research provides insights into pavement deterioration mechanisms, contributing to improved durability and maintenance strategies for asphalt pavements in salt environments.