The ideal cutting-tool coating material is characterized by unique chemical and physical properties to achieve excellent cutting performance, a good thermal barrier effect, and a high-quality machined surface. Diamond-like carbon (DLC) coating, as a kind of cutting-tool coating material, has been used in cutting various materials due to its low coefficients of friction and thermal expansion, high hardness, and good chemical inert and thermal conductivity. This article mainly focuses on the modification methods for the DLC coating and their application in machining different materials. Firstly, the methods employed to improve the mechanical properties of DLC coating are reviewed and analyzed, including the multilayer structure design, transition layer, and doping other elements. Secondly, the machining performances of DLC-coated tools in the application of different materials are summarized. This review provides knowledge of modification mechanisms regarding DLC coating and its effects on mechanical properties. For machining different materials, it provides a reference to make a suitable selection and design of DLC coating to obtain better machining performance.
The excellent adhesion strength between the substrate and coating in the field of cemented carbide-coated tools is the crux of ensuring the durability of coated tools. The TiN coating is often used as a bonding layer to improve the bonding strength between the substrate and outer coating. Insights into detailed information on the interfacial properties between substrate and coating are essential for developing coating structures with optimal adhesion properties. Therefore, first-principles calculations were used to investigate the anisotropy of the elastic characteristics of WC and TiN as well as the bonding mechanism at the interface. The findings demonstrate that WC and TiN bulks have different symmetries in their anisotropy of elastic characteristics. WC(0001) and TiN(111) slabs can be well-lattice matched thanks to the low lattice mismatch ratio (2.7%). The HCP stacking mode has larger bonding energy than the OT and hole stacking modes in the interface structure with identical terminating atoms. The C-HCP-Ti interface forms covalent and ionic bonds, which is thermodynamically stable (γ = −1.127 J/m2) and has the highest bonding strength (Wad = 8.899 J/m2) among all interface structures. The results of this study provide a practical perspective for improving the mechanical properties of cemented carbide-coated tools.
26 December 2019 in International Journal of Modern Physics B