Desalegn Alemu Mengistie

Dr. Desalegn Alemu Mengistie

California Polytechnic State University
orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 September 2012 in Energy & Environmental Science
Verified
Journal Article
Closed access
PDF file
Desalegn Alemu MengistieDesalegn Alemu Mengistie
Desalegn Alemu Mengistie
HWHung-Yu Wei
Hung-Yu Wei
KHKuo-Chuan Ho
Kuo-Chuan Ho
CCChih-Wei Chu
Chih-Wei Chu
We proposed a simple yet robust film treatment method with methanol having only one hydroxyl group to enhance the conductivity of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) by four orders of magnitude. Different methods of film treatment: immersing PEDOT:PSS film in the methanol solution; dropping methanol on the film; and a combination of these are employed and the results are compared. The conductivity of PEDOT:PSS films was enhanced from 0.3 S cm−1 to 1362 S cm−1 after film treatment with methanol. Other alcohols like ethanol and propanol were also used to treat the PEDOT:PSS film and showed inferior conductivity enhancement compared to methanol. The conductivity enhancement was greatly affected by the hydrophilicity and dielectric constant of the alcohols used. The mechanism of conductivity enhancement was investigated through various characterization techniques including FTIR, XPS and AFM. Removal of the insulator PSS from the film, and morphology and conformational changes are the mechanisms for the conductivity enhancement. The treated films also showed high transmittance and low sheet resistance desirable for a standalone electrode. ITO-free polymer solar cells were fabricated using PEDOT:PSS electrodes treated with methanol and showed almost equal performance to ITO electrodes.

7 July 2016 in Chemical Society Reviews
Verified
Journal Article
Open access
PDF file
RKRenee Kroon
Renee Kroon
Desalegn Alemu MengistieDesalegn Alemu Mengistie
Desalegn Alemu Mengistie
DKDavid Kiefer
David Kiefer
JHJonna Hynynen
Jonna Hynynen
JRJason D. Ryan
Jason D. Ryan
CMChristian Müller
Christian Müller
Thermoelectric plastics are a class of polymer-based materials that combine the ability to directly convert heat to electricity, and vice versa, with ease of processing. Potential applications include waste heat recovery, spot cooling and miniature power sources for autonomous electronics. Recent progress has led to surging interest in organic thermoelectrics. This tutorial review discusses the current trends in the field with regard to the four main building blocks of thermoelectric plastics: (1) organic semiconductors and in particular conjugated polymers, (2) dopants and counterions, (3) insulating polymers, and (4) conductive fillers. The design and synthesis of conjugated polymers that promise to show good thermoelectric properties are explored, followed by an overview of relevant structure–property relationships. Doping of conjugated polymers is discussed and its interplay with processing as well as structure formation is elucidated. The use of insulating polymers as binders or matrices is proposed, which permit the adjustment of the rheological and mechanical properties of a thermoelectric plastic. Then, nanocomposites of conductive fillers such as carbon nanotubes, graphene and inorganic nanowires in a polymer matrix are introduced. A case study examines poly(3,4-ethylenedioxythiophene) (PEDOT) based materials, which up to now have shown the most promising thermoelectric performance. Finally, a discussion of the advantages provided by bulk architectures e.g. for wearable applications highlights the unique advantages that thermoelectric plastics promise to offer.

14 June 2013 in Journal of Materials Chemistry A
Verified
Journal Article
Closed access
PDF file
Desalegn Alemu MengistieDesalegn Alemu Mengistie
Desalegn Alemu Mengistie
PWPen-Cheng Wang
Pen-Cheng Wang
CCChih-Wei Chu
Chih-Wei Chu
We systematically investigated the effect of the molecular weight of additives on the conductivity of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) by using different concentrations and molecular weights of polyethylene glycol (PEG) and ethylene glycol (EG). The conductivity enhancement depends on both the molecular weight and concentration of PEG used. The conductivity of PEDOT:PSS was enhanced from 0.3 S cm−1 to 805 S cm−1 with 2% PEG but to only 640 S cm−1 with 6% EG. PEGs with molecular weight higher than 400 have too low mobility to impart the required screening effect, and hence, the conductivity enhancement is less. Through FTIR, XPS and AFM investigations, the mechanism for the conductivity enhancement is found to be charge screening between PEDOT and PSS followed by phase separation and reorientation of PEDOT chains leading to bigger and better connected particles. The molecular weight and concentration of PEG also affect solar cell performances even though the conductivities are the same. Due to their high conductivity and high transmittance, ITO-free organic solar cell devices fabricated using PEDOT:PSS treated with 2% PEG anodes exhibited performance almost equal to that of the ITO counterparts.

24 January 2014 in ACS Applied Materials & Interfaces
Verified
Journal Article
Closed access
Desalegn Alemu MengistieDesalegn Alemu Mengistie
Desalegn Alemu Mengistie
MIMohammed A. Ibrahem
Mohammed A. Ibrahem
PWPen-Cheng Wang
Pen-Cheng Wang
CCChih-Wei Chu
Chih-Wei Chu

18 March 2020 in Nature Communications
Verified
Journal Article
Open access
PDF file
NKNara Kim
Nara Kim
SLSamuel Lienemann
Samuel Lienemann
Ioannis PetsagkourakisIoannis Petsagkourakis
Ioannis Petsagkourakis
Desalegn Alemu MengistieDesalegn Alemu Mengistie
Desalegn Alemu Mengistie
SKSeyoung Kee
Seyoung Kee
KTKlas Tybrandt
Klas Tybrandt
The rapid growth of wearables has created a demand for lightweight, elastic and conformal energy harvesting and storage devices. The conducting polymer poly(3,4-ethylenedioxythiophene) has shown great promise for thermoelectric generators, however, the thick layers of pristine poly(3,4-ethylenedioxythiophene) required for effective energy harvesting are too hard and brittle for seamless integration into wearables. Poly(3,4-ethylenedioxythiophene)-elastomer composites have been developed to improve its mechanical properties, although so far without simultaneously achieving softness, high electrical conductivity, and stretchability. Here we report an aqueously processed poly(3,4-ethylenedioxythiophene)-polyurethane-ionic liquid composite, which combines high conductivity (>140 S cm−1) with superior stretchability (>600%), elasticity, and low Young’s modulus (<7 MPa). The outstanding performance of this organic nanocomposite is the result of favorable percolation networks on the nano- and micro-scale and the plasticizing effect of the ionic liquid. The elastic thermoelectric material is implemented in the first reported intrinsically stretchable organic thermoelectric module.

28 March 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Granch Berhe TseghaiGranch Berhe Tseghai
Granch Berhe Tseghai
Desalegn Alemu MengistieDesalegn Alemu Mengistie
Desalegn Alemu Mengistie
BMBenny Malengier
Benny Malengier
Kinde Anlay FanteKinde Anlay Fante
Kinde Anlay Fante
Lieva Van langenhoveLieva Van langenhove
Lieva Van langenhove
The conductive polymer complex poly (3,4-ethylene dioxythiophene):polystyrene sulfonate (PEDOT:PSS) is the most explored conductive polymer for conductive textiles applications. Since PEDOT:PSS is readily available in water dispersion form, it is convenient for roll-to-roll processing which is compatible with the current textile processing applications. In this work, we have made a comprehensive review on the PEDOT:PSS-based conductive textiles, methods of application onto textiles and their applications. The conductivity of PEDOT:PSS can be enhanced by several orders of magnitude using processing agents. However, neat PEDOT:PSS lacks flexibility and strechability for wearable electronics applications. One way to improve the mechanical flexibility of conductive polymers is making a composite with commodity polymers such as polyurethane which have high flexibility and stretchability. The conductive polymer composites also increase attachment of the conductive polymer to the textile, thereby increasing durability to washing and mechanical actions. Pure PEDOT:PSS conductive fibers have been produced by solution spinning or electrospinning methods. Application of PEDOT:PSS can be carried out by polymerization of the monomer on the fabric, coating/dyeing and printing methods. PEDOT:PSS-based conductive textiles have been used for the development of sensors, actuators, antenna, interconnections, energy harvesting, and storage devices. In this review, the application methods of PEDOT:SS-based conductive polymers in/on to a textile substrate structure and their application thereof are discussed.
1