The effects of annealing and chemical etching on the chemical, compositional, and electrical properties of polycrystalline molecular-beam epitaxy (MBE)-grown Cd1−xZnxTe thin films were investigated in detail for the first time to identify and eliminate some of the undesirable process-induced side effects resulting from the CdZnTe/CdS solar cell fabrication procedure. Depth-resolved x-ray photoelectron and Auger electron spectroscopies on processed surfaces along with current-voltage and capacitance-voltage measurements on In/Cd1−xZnxTe Schottky diodes were used to characterize the treated Cd1−xZnxTe surface. Films were annealed in air at 200–400 °C and etched in Br:CH3OH and K2Cr2O7:H2SO4 solutions, similar to processes used to achieve high efficiency CdTe/CdS solar cells. Air annealing was found to enhance the uniformity of the p-type conductivity within the film, yielding a doping value of ∼3×1015 cm−3. However, the air anneal resulted in a highly Zn-rich surface compared to hydrogen and argon anneals. Furthermore, the air anneal resulted in the oxidation of ∼80% of the Zn at the surface which was found to extend ∼0.1 μm into the bulk. This is in contrast to Cd and Te oxides which were detected only at the surface. A model is proposed to explain the Zn pileup near the surface. According to this model, the oxygen diffuses into the film to oxidize Zn resulting in a concentration gradient and outdiffusion of Zn. Subsequent etching of the annealed films by the standard Br2:CH3OH etch used for CdTe processing removed the surface Te and Cd oxides but failed to remove the Zn-rich surface region and Zn–O and did not result in a p+ Te-rich surface which is required to facilitate ohmic contacts. In contrast, etching of the annealed Cd1−xZnxTe surfaces with a concentrated K2Cr2O7:H2SO4 solution removed all oxides and left a surface completely depleted in Cd and Zn. Subsequently fabricated In/Cd1−xZnxTe Schottky barrier diodes on etched surfaces confirmed a significant reduction in effective barrier height, from ∼1.2 eV for the Br:CH3OH surface to ∼0.65 eV for the K2Cr2O7:H2SO4 etched surface due to a Te-rich surface layer with a p-type doping concentration of ∼3×1017 cm−3. It is expected that these results will provide guidelines to increase present-day Cd1−xZnxTe cell performance by reducing the resistance of ‘‘ohmic’’ contacts.
Tidal marsh restoration using dredged material is being undertaken in many coastal areas to replace lost habitat and ecosystem services due to tidal marsh loss. The fate of high levels of nitrogen (N) in fine-grained dredged material used as a substrate for marsh restoration is uncertain, but if exported tidally may cause subtidal habitat degradation. In this study, a mass balance was developed to characterize N fluxes in a two-year-old restored tidal marsh constructed with fine-grained dredged material at Poplar Island, MD, in Chesapeake Bay, and to evaluate the potential impact on the adjacent submersed aquatic vegetation (SAV) habitat. Denitrification and N accumulation in Spartina organic matter were identified as the major sinks (21.31 and 28.5 mg N m−2 d−1, respectively), while tidal export of TN was more modest (9.4 mg N m−2 d−1) and inorganic N export was low (1.59 mg N m−2 d−1). Internal cycling helped retain N within the marsh. Mineralization of N associated with labile organic matter in the dredged material was likely a large, but unquantified, source of N supporting robust plant growth and N exports. Exceedances of SAV water quality habitat requirements in the subtidal region adjacent to the marsh were driven by elevated Chesapeake Bay concentrations rather than enrichment by the marsh.
The ecosystem response to anthropogenic nitrogen (N) loading in estuarine systems is determined by hydrodynamics, biogeochemical transformation rates, and other system-specific characteristics. Historically, San Francisco (SF) Bay has been an outlier from other estuaries with an unusual resistance to eutrophication, despite having extremely high rates of nitrogen loading. Recent increases in phytoplankton biomass and an unprecedented harmful algal bloom, however, have increased the urgency to understand rates and drivers of nitrogen removal in the system. To assess benthic N cycling rates, we conducted seasonal measurements across nine sites in South and Lower South SF Bay, the two sub-embayments with the highest rates of area-normalized N loading, to determine the rates and potential drivers of denitrification and dissimilatory nitrate reduction to ammonium (DNRA). Denitrification rates averaged 60.6 ± 8.1 µmol m−2 h−1 and were primarily coupled to nitrification. Denitrification rates were positively correlated with DNRA rates and % clay. DNRA rates ranged from 0 to 20 µmol m−2 h−1 and on an annual basis averaged ~ 10% of total benthic nitrate reduction, with a negative correlation to % clay content in the surface sediment. The measured denitrification rates account for the removal of, on average, 14% of N loaded annually to South SF Bay, leaving a sizeable portion for alternate fates (e.g., recycling, export, or burial) and potential for substantial temporal and spatial variability (1–79%). This identifies the relative importance of sediment denitrification in ecosystems characterized by high nutrients and low productivity.
We estimated the net exchange of nitrogen and phosphorus species using core incubations under light and dark conditions in estuarine lakes that are the aquatic interface between the freshwater Everglades and marine Florida Bay. These lakes and adjacent shallow water Florida Bay environments are sites where the restoration of hydrological flows will likely have the largest impact on salinity. Sediment respiration, measured by oxygen uptake, averaged (±S.D.) −2400 ± 1300, −300 ± 1000, and 1900 ± 1400 μmol m−2 h−1 for dark incubations, light incubations, and gross photosynthesis estimates, respectively, with dark incubations consistent with oxygen uptake measured by microelectrode profiles. Although most fluxes of soluble reactive phosphorus, nitrate, and N2–N were low under both light and dark incubation conditions, we observed a number of very high efflux events of NH4+ during dark incubations. A significant decrease in NH4+flux was observed in the light. The largest differences between light and dark effluxes of NH4+ occurred in lakes during periods of low coverage of the aquatic macrophyte Chara hornemannii Wallman, with NH4+ effluxes > 200 μmol m−2 h−1. Increasing freshwater flow from the Everglades is expected to expand lower salinity environments suitable for Chara, and therefore, diminish the sediment NH4+ effluxes that may fuel algal blooms.
23 August 2008 in Acta Crystallographica Section A Foundations of Crystallography