In recent years, manufacturing industries (e.g., medical, aerospace, and automobile) have been changing their manufacturing process to small-quantity batch production to flexibly cope with fluctuations in demand. Therefore, many companies are trying to produce products by introducing 3D printing technology into the manufacturing process. The 3D printing process is based on additive manufacturing (AM), which can fabricate complex shapes and reduce material waste and production time. Although AM has many advantages, its product quality is poor compared to conventional manufacturing systems. This study proposes a methodology to improve the quality of AM products based on data analysis. The targeted quality of AM is the surface roughness of the stacked wall. Surface roughness is one of the important quality indicators and can cause short product life and poor structure performance. To control the surface roughness, the resultant surface roughness needs to be predicted in advance depending on the process parameters. Various analysis methods such as data pre-processing and deep neural networks (DNN) combined with sensor data are used to predict surface roughness in the proposed methodology. The proposed methodology is applied to field data from operated wire + arc additive manufacturing (WAAM), and the analysis result shows its effectiveness, with a mean absolute percentage error (MAPE) of 1.93%.
Additive Manufacturing (AM) is a pivotal technology for transforming complex geometries with minimal tooling requirements. Among the several AM techniques, Wire Arc Additive Manufacturing (WAAM) is notable for its ability to produce large metal components, which makes it particularly appealing in the aerospace sector. However, precise control of the bead geometry, specifically bead width and height, is essential for maintaining the structural integrity of WAAM-manufactured parts. This paper introduces a methodology using a Deep Neural Network (DNN) model for forecasting the bead geometry in the WAAM process, focusing on gas metal arc welding cold metal transfer (GMAW-CMT) WAAM. This study addresses the challenges of bead geometry prediction by developing a robust predictive framework. Key process parameters, such as the wire travel speed, wire feed rate, and bead dimensions of the previous layer, were monitored using a Coordinate Measuring Machine (CMM) to ensure precision. The collected data were used to train and validate various regression models, including linear regression, ridge regression, regression, polynomial regression (Quadratic and Cubic), Random Forest, and a custom-designed DNN. Among these, the Random Forest and DNN models were particularly effective, with the DNN showing significant accuracy owing to its ability to learn complex nonlinear relationships inherent in the WAAM process. The DNN model architecture consists of multiple hidden layers with varying neuron counts, trained using backpropagation, and optimized using the Adam optimizer. The model achieved mean absolute percentage error (MAPE) values of 0.014% for the width and 0.012% for the height, and root mean squared error (RMSE) values of 0.122 for the width and 0.153 for the height. These results highlight the superior capability of the DNN model in predicting bead geometry compared to other regression models, including the Random Forest and traditional regression techniques. These findings emphasize the potential of deep learning techniques to enhance the accuracy and efficiency of WAAM processes.
In human activity recognition, accurate and timely fall detection is essential in healthcare, particularly for monitoring the elderly, where quick responses can prevent severe consequences. This study presents a new fall detection model built on a transformer architecture, which focuses on the movement speeds of key body points tracked using the MediaPipe library. By continuously monitoring these key points in video data, the model calculates real-time speed changes that signal potential falls. The transformer’s attention mechanism enables it to catch even slight shifts in movement, achieving an accuracy of 97.6% while significantly reducing false alarms compared to traditional methods. This approach has practical applications in settings like elderly care facilities and home monitoring systems, where reliable fall detection can support faster intervention. By homing in on the dynamics of movement, this model improves both accuracy and reliability, making it suitable for various real-world situations. Overall, it offers a promising solution for enhancing safety and care for vulnerable populations in diverse environments.
Coal has been used as the most commonly energy source for power plants since it is relatively cheap and readily available. Thanks to these benefits, many countries operate coal-fired power plants. However, the combustion of coal in the coal-fired power plant emits pollutants such as sulfur oxides (SOx) and nitrogen oxides (NOx) which are suspected to cause damage to the environment and also be harmful to humans. For this reason, most countries have been strengthening regulations on coal-consuming industries. Therefore, the coal-fired power plant should also follow these regulations. This study focuses on the prediction of harmful emissions when the coal is mixed with high-quality and low-quality coals during combustion in the coal-fired power plant. The emission of SOx and NOx is affected by the mixture ratio between high-quality and low-quality coals so it is very important to decide on the mixture ratio of coals. To decide the coal mixture, it is a prerequisite to predict the amount of SOx and NOx emission during combustion. To do this, this paper develops a deep neural network (DNN) model which can predict SOx and NOx emissions associated with coal properties when coals are mixed. The field data from a coal-fired power plant is used to train the model and it gives mean absolute percentage error (MAPE) of 7.1% and 5.68% for SOx and NOx prediction, respectively.
Solar power forecasting is important for energy management and grid stability, yet many deep learning studies use a large set of meteorological and time-based variables because of the belief that more inputs improve model performance. In practice, a large feature set can introduce redundancy, increase computational effort, and reduce clarity in model interpretation. This study examines whether dependable forecasting can be achieved using only the most influential variables, presenting a minimal feature deep learning approach for short term prediction of solar power. The objective is to evaluate a Transformer model that uses only two key variables, solar irradiance and soil temperature at a depth of ten centimetres. These variables were identified through feature importance analysis. A real world solar power dataset was used for model development, and performance was compared with RNN, GRU, LSTM, and Transformer models that use the full set of meteorological inputs. The minimal feature Transformer reached a Mean Absolute Error of 1.1325, which is very close to the result of the multivariate Transformer that uses all available inputs. This outcome shows that essential temporal patterns in solar power generation can be captured using only the strongest predictors, supporting the usefulness of reducing the size of the input space. The findings indicate that selective feature reduction can maintain strong predictive performance while lowering complexity, improving clarity, and reducing data requirements. Future work may explore the adaptability of this minimal feature strategy across different regions and environmental conditions.
Conventional subtractive manufacturing methods, such as cutting, often result in material waste and limitations in geometric complexity. To address these challenges, Wire Arc Additive Manufacturing (WAAM), in which components are built through successive weld bead deposition, has attracted increasing attention across various industrial fields. However, WAAM-fabricated components typically exhibit significant surface irregularities, necessitating additional post-processing that reduces overall productivity. Improving productivity therefore requires effective control and optimization of deposition parameters. This task is particularly challenging in multilayer WAAM processes, as the geometry of previously deposited layers varies with operating conditions. To address this challenge, this study proposes an AI-based framework for controlling surface roughness by rapidly identifying near-optimal process parameters in response to evolving bead geometry. A large-scale simulation dataset was generated by applying a pre-trained deep neural network (DNN) surface roughness predictor to one million bead geometry variations under 72 process parameter combinations. The resulting optimal parameter labels were used to train a classification model that recommends process conditions based on the current bead geometry. Model performance was evaluated using predictor-estimated surface roughness values, achieving Weighted Precision, Recall, and F1-score of 0.98, with an average AUC of 0.977. Five previously generated WAAM specimens were used for comparative analysis between AI-recommended and conventional process conditions using the previously developed and validated surface roughness prediction model, rather than direct physical measurements. This predictor-based feasibility analysis showed that AI-recommended conditions consistently reduced the predicted surface roughness, indicating the potential of AI-driven process optimization to improve surface quality in WAAM and reduce reliance on post-processing.